Facundo Acevedo [Fri, 9 Jun 2023 23:47:59 +0000 (20:47 -0300)]
arp-whisper: Add new package
arp-whisper listens to ARP requests on a network interface and responds
to them based on a list of IP-MAC address mappings defined in a
configuration file
Robert Marko [Sat, 17 Jun 2023 06:47:39 +0000 (08:47 +0200)]
mhz: add new package
mhz is a tool for mathematically calculating the current CPU frequency, it
has proven to be a really good help while developing CPU frequency scaling
solutions as it allows to independently prove that scaling actually works.
Now that the author has added a license we can package it for the all to
use.
Florian Eckert [Thu, 15 Jun 2023 13:38:34 +0000 (15:38 +0200)]
modemmanager: if an alias name is used do not check sysfs path
If an alias name is used for the modem, then a check if the device exists
in sysfs does not work. To fix this remove the check if the sysfs device
exists. The protocoll handler already checks if the modem is responsible
for this device on the next line.
Florian Eckert [Thu, 15 Jun 2023 12:31:51 +0000 (14:31 +0200)]
modemmanager: do not cache virtual device events
On small systems with many virtual devices, the modem manager sometimes
could not start because it took too long until all devices for the modem
were recognised. This is because all system events that are stored in
the file events.cache have to be processed. To speed up the processing,
all devices under /sys/devices/virtual are now filtered out so that they
do not have to be processed.
ICU 73.2 updates to CLDR 43.1 locale data. These are maintenance releases for ICU 73 and CLDR 43, with limited sets of bug fixes and no API or structural changes.
Change COMMITCOUNT in rules.mk to:
```
COMMITCOUNT = $(if $(DUMP),0,$(shell sed -i "s/\$$(COMMITCOUNT)/$(call commitcount)/" $(CURDIR)/Makefile))
```
then update all affected packages by:
```
for i in $(git -C feeds/packages grep -l COMMITCOUNT | sed 's^.*/\([^/]*\)/Makefile^\1^';);
do
make package/$i/clean
done
```
nginx: create empty directory for module.d include
Fix a bug on installation of nginx-mod-luci where module.d directory
is not found and luci.module creation fails.
Correctly create empty directory for module.d include for dynamic module
loading by placing file in this directory.
Nick Hainke [Thu, 8 Jun 2023 10:36:33 +0000 (12:36 +0200)]
tunneldigger-broker: add broker for tunneldigger
In mesh communities, tunneldigger is widely used to create L2TPv3 tunnels
and mesh via them. Since the broker is typically installed on other
distributions, the openwrt broker package has not received any
maintenance in recent years [0]. I take now care of the further maintaince
of this package. Furthermore, I consulted with the maintainers to ensure
that they were comfortable with the change [1].
This PR is just a refactoring of the already existing opkg package from
wlanslovenija. It fixes config parsing and in general the config, adapts
to the new python syntax and fixes dependency handling.
Oskari Rauta [Sun, 11 Jun 2023 12:43:49 +0000 (15:43 +0300)]
netavark: update to v1.6.0
netavark v1.6.0 was released, so instead of using
git version, use release. Does not contain very
much of changes, but list is available from netavark's
commit log.
Software now comes with additional tool named
netavark-dhcp-proxy-client which is now included
in package.
xtables-addons: fix compilation error on kernel 6.1
Fix compilation error on kernel 6.1.
Fix compilation error:
In file included from /mnt/Data/Sources/openwrt/x-wrt/build_dir/target-aarch64_cortex-a72_musl/linux-bcm27xx_bcm2711/xtables-addons-3.24/extensions/LUA/controller.h:24,
from /mnt/Data/Sources/openwrt/x-wrt/build_dir/target-aarch64_cortex-a72_musl/linux-bcm27xx_bcm2711/xtables-addons-3.24/extensions/LUA/xt_LUA_target.c:27:
/mnt/Data/Sources/openwrt/x-wrt/build_dir/target-aarch64_cortex-a72_musl/linux-bcm27xx_bcm2711/xtables-addons-3.24/extensions/LUA/lua/lua.h:12:10: fatal error: stddef.h: No such file or directory
12 | #include <stddef.h>
| ^~~~~~~~~~
compilation terminated.
The error is caused by commit 04e85bbf71c9 ("isystem: delete global
-isystem compile option") present upstream from kernel 5.16. This
commit dropped the inclusion of system headers by default and caused
error on LUA module.
Following what is done in the commit for the required code, modify the
LUA Kbuild to include these header and restore correct compilation of
the LUA module.
Fixes: #21294 Signed-off-by: Christian Marangi <redacted>
Jitao Lu [Sun, 11 Jun 2023 13:01:18 +0000 (21:01 +0800)]
glib2: disable gnulib printf
A compiler bug (suspiciously) blocks gnulib compilation for
mipsel_24kc_24kf. While we had this patch to disable gnulib, it was
accidentally removed by 5d27631d9fbca076eb6377fc8c10f474ce9f4fea. Add it
back to fix the long broken build for mipsel_24kc_24kf.
Oskari Rauta [Sun, 11 Jun 2023 13:11:39 +0000 (16:11 +0300)]
aardvark-dns: update to v1.6.0
aardvark-dns v1.6.0 was released,
so instead of using git version, use release -
similarly like netavark.
Very much hasn't changed but list of changes
is in git commit log of aardvark-dns.
nginx: fix problem with migration of uci conf template
Fix some problem with migration of uci conf template and include of
module.d directive.
Fix 2 case:
- uci.conf.template not versioned but with the include module.d
resulting in double include module.d
- uci.conf.template version 1.1 with the include module.d at the end
of the config. This is problematic for nginx as modules must be
included before any http directive.
Handle this 2 case to restore a working uci.conf.template configuration
on migrated config.
Imported patches included in debian and other package.
* 200-Fix-NULL-pointer-crashes-from-175.patch
CVE-2021-3502
A flaw was found in avahi 0.8-5. A reachable assertion is present in avahi_s_host_name_resolver_start function allowing a local attacker to crash the avahi service by requesting hostname resolutions through the avahi socket or dbus methods for invalid hostnames. The highest threat from this vulnerability is to the service availability.
* 201-Avoid-infinite-loop-in-avahi-daemon-by-handling-HUP-event.patch
CVE-2021-3468
A flaw was found in avahi in versions 0.6 up to 0.8. The event used to signal the termination of the client connection on the avahi Unix socket is not correctly handled in the client_work function, allowing a local attacker to trigger an infinite loop. The highest threat from this vulnerability is to the availability of the avahi service, which becomes unresponsive after this flaw is triggered.
* 202-avahi_dns_packet_consume_uint32-fix-potential-undefined-b.patch
avahi_dns_packet_consume_uint32 left shifts uint8_t values by 8, 16 and 24 bits to combine them into a 32-bit value. This produces an undefined behavior warning with gcc -fsanitize when fed input values of 128 or 255 however in testing no actual unexpected behavior occurs in practice and the 32-bit uint32_t is always correctly produced as the final value is immediately stored into a uint32_t and the compiler appears to handle this "correctly".
Cast the intermediate values to uint32_t to prevent this warning and ensure the intended result is explicit.
* 203-Do-not-disable-timeout-cleanup-on-watch-cleanup.patch
This was causing timeouts to never be removed from the linked list that tracks them, resulting in both memory and CPU usage to grow larger over time.
* 204-Emit-error-if-requested-service-is-not-found.patch
It currently just crashes instead of replying with error. Check return
value and emit error instead of passing NULL pointer to reply.
* 205-conf-file-line-lengths.patch
Allow avahi-daemon.conf file to have lines longer than 256 characters (new limit 1024).
Ivan Pavlov [Wed, 7 Jun 2023 17:58:42 +0000 (20:58 +0300)]
openvpn: fix ipchange hotplug event
In f8a8b71e26b9bdbf86fbb7d4d1482637af7f3ba4 openvpn introduced new hotplug events.
For server config, ipchange hotplug event produces an error.
So, make ipchange hotplug event for client only
Jeffery To [Wed, 7 Jun 2023 11:25:20 +0000 (19:25 +0800)]
python3-django-etesync-journal: Remove package
This package was originally added[1] as it was a dependency of
etesync-server 0.3.0. When etesync-server was renamed to etebase and
upgraded to 0.6.1[2], this dependency was removed. No other package in
the packages feed depends on this package.
Upstream has also archived the git repo[3] and stated that the
repo/package is deprecated. It does not appear that any newer version of
etebase uses this package.
This removes the python3-django-etesync-journal package; it will be
submitted to the abandoned packages repo.
Dirk Brenken [Mon, 5 Jun 2023 15:20:12 +0000 (17:20 +0200)]
banip: release 0.8.7-1
* Optionally auto-add entire subnets to the blocklist Sets based on an additional RDAP request with the
monitored suspicious IP, set 'ban_autoblocksubnet' accordingly (disabled by default).
For more information regarding RDAP see
https://www.ripe.net/manage-ips-and-asns/db/registration-data-access-protocol-rdap for reference.
* small fixes & cosmetics
* update readme
The buildbots failed for the mentioned platform with the following error:
(I shortened the pathnames and broke long lines a little bit for readability)
.../lib/gcc/riscv64-openwrt-linux-musl/12.3.0/../../../../
riscv64-openwrt-linux-musl/bin/ld: Zend/zend_execute_API.o: in function `.L533':
zend_execute_API.c:(.text+0x1b1c): undefined reference to `__atomic_exchange_1'
.../riscv64-openwrt-linux-musl/bin/ld: Zend/zend_atomic.o:
in function `zend_atomic_bool_exchange':
zend_atomic.c:(.text+0xc): undefined reference to `__atomic_exchange_1'
collect2: error: ld returned 1 exit status
make[4]: *** [Makefile:350: sapi/cli/php] Error 1
Inspired by the blog post[1], linking to libatomic explicitly seems to
do the trick.
[1] A RISC-V gcc pitfall revealed by a glibc update
https://blog.jiejiss.com/A-RISC-V-gcc-pitfall-revealed-by-a-glibc-update
Tianling Shen [Sun, 4 Jun 2023 16:50:02 +0000 (00:50 +0800)]
packr: remove package
In Go 1.18+ embedded files is natively supported, so this package
is useless now. It has been archived on Jun 2022 and failed to build
on the riscv64 target.
Oskari Rauta [Sun, 28 May 2023 10:47:30 +0000 (13:47 +0300)]
speedtestcpp: add new package
speedtestcpp is a fork of Taganaka's speedtest, rewritten.
It has some improvements such as
- interactive result show
- use server recommended profiles, which makes it faster (can be disabled)
- and more..
It also provides it's functions in shared and static libraries
and offers development headers for integrating speedtest to
features to another projects.
This commit replaces speedtestpp since this fork has
all the same features + more.
Jeffery To [Mon, 29 May 2023 19:24:54 +0000 (03:24 +0800)]
micropython-lib: Update to master, split target package
The package has been reworked to install the same files that are
available to be downloaded/installed by mip, the package manager new to
MicroPython 1.20.0.
This also splits the original target package into four:
* micropython-lib
* Includes packages common to all MicroPython ports (python-stdlib,
python-ecosys, micropython)
* Contains mpy bytecode files
* micropython-lib-src
* Includes packages common to all MicroPython ports (python-stdlib,
python-ecosys, micropython)
* Contains py source files
* micropython-lib-unix
* Includes packages specific to the MicroPython Unix port (unix-ffi)
* Contains mpy bytecode files
* Installs a specific launcher (micropython-unix) that adds the Unix
package directory into MicroPython's library path
* micropython-lib-unix-src
* Includes packages specific to the MicroPython Unix port (unix-ffi)
* Contains py source files
This also updates the package license, title, and description.
Patches:
* 001-build-unix-ffi.patch
This enables the repo build script to also build the Unix-specific
packages. Not sure if upstream is open to accepting this since the
Unix-specific packages don't fit well into the existing package
distribution mechanism.
* 002-add-unix-ffi-os-path.patch and 003-add-unix-ffi-uu.patch
These fix instances where the unix-ffi version of the os package is
overridden by the python-stdlib version. These have been submitted to
upstream: https://github.com/micropython/micropython-lib/pull/672
git.99rst.org / openwrt-packages.git / log