Stan Grishin [Mon, 23 Jan 2017 16:02:44 +0000 (08:02 -0800)]
vpnbypass: initial commit
Signed-off-by: Stan Grishin <redacted>
vpnbypass: fixed renamed option in stop_service
Signed-off-by: Stan Grishin <redacted>
vpnbypass: fixed typo in makefile, switch FW_MARK to 0x010000 to play nice with SQM/mwan (thanks Hannu)
Signed-off-by: Stan Grishin <redacted>
vpnbypass: proper masking in setting mark
Signed-off-by: Stan Grishin <redacted>
vpnbypass: separating luci-app-vpnbypass into different tree
Signed-off-by: Stan Grishin <redacted>
vpnbypass: fixed incorrect use of procd_add_reload_interface_trigger according to http://wiki.prplfoundation.org/wiki/Procd_reference
While fixing up some incorrect STAGING_DIR_HOSTPKG uses I introduced, I
noticed that the LIBPNG12_CONFIG variable is not used by libgd anymore (it
is called LIBPNG_CONFIG now).
As the build runs fine without setting LIBPNG_CONFIG, let's just remove the
unused line.
Dirk Brenken [Mon, 23 Jan 2017 18:03:41 +0000 (19:03 +0100)]
adblock: update 2.1.5
* fix init boot function
* made fetch utility check more bullet proof
* automatically switch between default wget & uclient-fetch
configuration
* output link to online documentation on error
* update documentation
Eric Luehrsen [Thu, 29 Dec 2016 06:32:31 +0000 (01:32 -0500)]
unbound: expand UCI to cover some popular dnsmasq features
Unbound+DHCP (server of your choice) should be able to replicate
a lot of what dnsmasq provides. With this change set Unbound
still works with dnsmasq, but also it can work with a plain
DHCP server. Features have been added within the UCI itself
to act like dnsmasq.
- alone: name each interface relative to router hostname
- alone: prevent upstream leakage of your domain and '.local'
- dnsmasq: use dnsmasq UCI to configure forwarding clauses
- dhcp: work with odhcpd as example of companion DHCP-DNS
- dhcp: convert DHCPv4 leases into EUI64 SLAAC for DNS records
- all: enable encrypted remote unbound-control using splice conf
- all: allow user spliced conf-files for hybrid UCI and manual conf
-- 'unbound_srv.conf' will be spliced into the 'server:' clause
-- 'unbound_ext.conf' will add clauses to the end, example 'forward:'
README HOW TO for dnsmasq-in-serial, dnsmasq-in-parallel, and
unbound-with-odhcpd have better/added UCI starters. HOW TO for
including unbound_srv.conf and unbound_ext.conf are added.
Document new UCI: add_local_fqdn, add_wan_fqdn, dhcp4_slaac6,
dhcp_link, domain, and domain_type
Eric Luehrsen [Sat, 7 Jan 2017 19:19:22 +0000 (14:19 -0500)]
unbound: expand UCI support for odhcpd DHCP-DNS
This is bare minimum change in 'unbound.sh' and
'dnsmasq.sh' to migrate the UCI option set for
more flexibility. The boolean(s) to link to
dnsmasq are being changed to a state to include
odhcpd. It is executable but a small step for
clear change management.
Eric Luehrsen [Thu, 29 Dec 2016 06:29:17 +0000 (01:29 -0500)]
unbound: add odhcpd specific scripts to link DHCP-DNS
The UCI for Unbound already links to dnsmasq, but what
if with Unbound, we want to configure a plain dhcp server.
Most servers can call a script for lease events. That
script can then formulate DNS records and load them
with unbound-control (dependency).
The files added here work with OpenWRT/LEDE odhcpd, such
that it can be run alone. They can be used as examples
for any dhcp server. 'odhcpd.sh' is to be called by
odhcpd when a lease event occurs. 'odhcpd.awk' is called
internal to the shell script. The awk script handles
any tricky reformating that may be required.
Eric Luehrsen [Fri, 23 Dec 2016 07:37:21 +0000 (02:37 -0500)]
unbound: improve NTP hotplug behavior when Unbound is disabled
If Unbound was disabled and at later time enabled, then it
would operate in DNSSEC less-secure mode. When NTP hotplug
was called, the timestamp file was not updated. This was
found testing Unbound vs other tools (bind, dnsmasq).
Jo-Philipp Wich [Wed, 18 Jan 2017 11:08:40 +0000 (12:08 +0100)]
coreutils: add libcap dependency to selected applets
If libcap happens to be present in the environment, coreutils will pick it up
and link some applets against it.
Since the idea of coreutils is to provide a full featured alternative to the
busybox applets, do not inhibit the optional dependency but explicitely
require libcap instead.
Fixes the following error spotted on the buildbots:
Package coreutils-dir is missing dependencies for the following libraries:
libcap.so.2
Jo-Philipp Wich [Wed, 18 Jan 2017 03:39:56 +0000 (04:39 +0100)]
loudmouth: fix autoconf errors
Do not override configure recipe and do not invoke upstream autogen.sh.
The shipped autogen.sh attempts to call "gtkdocize" which is no guaranteed
build prereq of LEDE or OpenWrt.
Also add a patch to disable the processing of documentation, tests and
examples as these resources rely on gtk-doc infrastructure which is not
available within LEDE or OpenWrt.
Example error for the bad autogen.sh invocation:
( cd .../loudmouth-1.5.3; ./autogen.sh )
./autogen.sh: 33: ./autogen.sh: gtkdocize: not found
Makefile:73: recipe for target '.../.configured_yynyyyyn' failed
Example error for the lacking gtk-doc automake infrastructure:
automake: error: cannot open < gtk-doc.make: No such file or directory
autoreconf: .../host/bin/automake failed with exit status: 1
[...]
config.status: error: cannot find input file: `docs/reference/Makefile.in'
Makefile:72: recipe for target '.../.configured_yynyn' failed
p-wassi [Wed, 7 Dec 2016 23:36:08 +0000 (00:36 +0100)]
libs/libcap: update to 2.25
Update libcap to upstream release 2.25
Since the libattr thing was dropped upstream in [1] it is also removed here.
Then, to overcome an issue in cross-compiling [2], set the Make parameter
according to [3].
micropython-lib: workaround the `install` build rule
So, I chose to workaround it in the Makefile.
A proper fix is a bit more work that I would like to do now,
and I have no suggestion/idea for a good fix right now.
The problem is with the `CMD` part that's used in the install rule,
together with the fact that PREFIX is the same as the source location.
The gist of it, is that it seems that this will filter
and copy to `PREFIX` all python sources and folders that
are not names `dist`, `__pycache__`, or `*.egg-info`.
And it searches all folders at (exactly) depth 1.
The solution I chose is to put a `dist` folder under
`_install_tmp`, which is kind of a trick to go
to depth 2 and avoid both conditions in the `find` call.
Peter Wagner [Mon, 16 Jan 2017 21:28:01 +0000 (22:28 +0100)]
ntpd: add hotplug script that signals when ntp reaches the stratum level like the sysntp implementation
use ntpq to check the status of the ntp server as all other status scripts included in the ntp tarball are
based on perl which would dramatically increase the footprint of ntpd
git.99rst.org / openwrt-packages.git / log