Jasper Scholte [Fri, 22 Dec 2017 23:13:13 +0000 (00:13 +0100)]
digitemp: reintroduce package
This reintroduces digitemp from the "old unmaintained" repository: http://git.openwrt.org/?p=packages.git;a=tree;f=utils/digitemp;hb=HEAD
Updated to v3.7.1 and based on github as mentioned here: https://www.digitemp.com/software.shtml
Set myself as maintainer.
Mislav Novakovic [Thu, 21 Dec 2017 11:41:02 +0000 (12:41 +0100)]
netopeer2: bump to latest version
This patch add's a new cmakefile which builds other cmakefiles and
simplifies the Makefile, also it renames the yang files so
sysrepoctl does not create duplicates.
Jasper Scholte [Thu, 21 Dec 2017 09:11:29 +0000 (10:11 +0100)]
rtl_433: add package
This will add the rtl_433 package. The project can be found: https://github.com/merbanan/rtl_433
It is based on a recent trunk since the latest release is negligible.
This should make Python & Python3 packages reproducible
when building.
In my local tests, I got the same sha256 for a sample
.pyc file, so likely this is the solution that should address
this.
Alin Nastac [Mon, 18 Dec 2017 12:31:16 +0000 (13:31 +0100)]
xl2tpd: remove demand support from netifd l2tp protocol
This pppd feature does not make sense in L2TP case because the
tunnel is already connected when xl2tpd launch pppd process. If
a dial-on-demand feature is to be implemented, trigger interface
would have to be provided by xl2tpd, not pppd.
The commit caused warnings to be displayed at make defconfig etc.
WARNING: Makefile 'package/feeds/packages/python/python/Makefile'
has a host build dependency on 'zlib/host' but
'package/libs/zlib/Makefile' does not implement a 'host' build type
Dirk Brenken [Fri, 15 Dec 2017 18:10:17 +0000 (19:10 +0100)]
travelmate: release 1.0.0
* limit sta interface selection/handling
to defined travelmate interface (trm_iface) only
* check eap capabilities and ignore enterprise uplinks
as long as eap support is not available
* documentation update
* cosmetics
* LuCI: various cleanups
Sven Eckelmann [Thu, 7 Dec 2017 09:36:25 +0000 (10:36 +0100)]
ap51-flash: Fix source repository URL
The URL git://dev.cloudtrax.com/ap51-flash.git is not the actual public
source repository URL for ap51-flash. It is not even accessible in the
moment. The official repository can now be found at github.
python,python3: add zlib/host to HOST_BUILD_DEPENDS
This should fix the zlibmodule build on the host side.
Usually, if zlib is not found, Python/Python3 builds fine
without it, but there are some cases where the Python/Python3
interpreter on the host-side requires zlib to run.
At the moment, zlib does not have a host-build.
This should be available when this PR gets merged:
https://github.com/lede-project/source/pull/1329
[ or a similar one that contains host-build support for zlib ].
In the meantime, this change can go into Python/Python3.
Hans Dedecker [Wed, 13 Dec 2017 10:39:53 +0000 (11:39 +0100)]
strongswan: add interface uci list
The interface config option allows users to configure logical OpenWRT
interface names in the ipsec section; it allows StrongSwan to listen
and send traffic on specified interface(s). It translates to interfaces_use
StrongSwan option which is a comma sepearted list of network devices
that should be used by charon.
Since StrongSwan can only be started when one of the specified logical
OpenWRT interface is up procd interface triggers are installed to
trigger the reload script.
Hans Dedecker [Wed, 13 Dec 2017 09:32:26 +0000 (10:32 +0100)]
strongswan: fix reload service
Based on the ipsec running state reload_service is either reloading ipsec
or starting ipsec. However in the latter case it calls ipsec start which
bypasses the procd start_service function which means the running ipsec
instance is not managed by procd.
Fix this by calling start in case ipsec is not running; at the same time
add service_running function which is used by procd provided running
function.
The arpa/nameser.h header of musl libc indirectly depends on the endian.h
header but fails to explicitely include it to properly define
`__BYTE_ORDER` and `__BIG_ENDIAN` prior to declaring the DNS `HEADER`
structure.
When both the appropriate `__BYTE_ORDER` and `__BIG_ENDIAN` defines are
unset, the `#if __BYTE_ORDER == __BIG_ENDIAN` condition in `nameser.h`
evaluates to true, causing it to declare a bad (big endian) DNS packet
header structure on little endian systems.
Work around this musl bug by forcibly passing `-include endian.h` through
the `osflags` file.
An upstream fix for musl libc has been submitted with
http://www.openwall.com/lists/musl/2017/12/04/3
This should solve iodine packet corruption on little endian musl systems
reported at
http://lists.infradead.org/pipermail/lede-dev/2017-November/010085.html
Jo-Philipp Wich [Tue, 5 Dec 2017 12:34:50 +0000 (13:34 +0100)]
nlbwmon: update to current HEAD
Update to latest Git HEAD in order to solve a number of issues.
- Improves MAC address lookup reliability
- Properly counts DNAT-ed connections (e.g. for port forwards)
- Fixes stack corruption when parsing netlink records
- Fixes deletion of gzipped databases
Rosen Penev [Mon, 11 Dec 2017 03:54:14 +0000 (19:54 -0800)]
gnutls: Use HTTPS instead of FTP
While recently building asterisk, the make system stalled on gnutls. On my install of Ubuntu 16.04 on WSL, it seems curl can't download from ftp and doesn't even time out properly. Easiest solution is to switch the gnutls Makefile to use HTTPS instead.
python,python3: define config option for bluetooth support
It was reported via
https://github.com/openwrt/packages/pull/5122#issuecomment-347395472
that if bluez-libs is selected as an installable package,
then the error below will show up:
```
* satisfy_dependencies_for: Cannot satisfy the following dependencies for python-light:
* bluez-libs *
* opkg_install_cmd: Cannot install package python-light.
```
This looks like a limitation in the design of package deps,
and maybe a misuse of conditional deps (i.e. PACKAGE_bluez-libs:bluez-libs).
So, to fix this, an idea we're adding an extra symbol
that enfoces installation of bluez-libs if selected.
We also need to add a way to disable bluetooth build
if PYTHON(3)_BLUETOOTH_SUPPORT is de-selected.
Otherwise, bluetooth is installed and the socket
module is broken due to linker errors.
git.99rst.org / openwrt-packages.git / log