Karol Babioch [Sun, 25 Mar 2018 21:36:18 +0000 (23:36 +0200)]
net-snmp: Enable MIB ip-mib/inetNetToMediaTable
This enables the table `inetNetToMediaTable` from `ip-mib`, which implements
the `ipNetToPhysicalTable`. The former one is already enabled with the current
configuraiton, but it has been deprecatd by the IP version-neutral
`ipNetToMediaTable`, which also supports IPv6 entries [1]. It also disables all
other submodules from this MIB to keep the footprint small.
Jianhui Zhao [Sun, 25 Mar 2018 04:23:30 +0000 (12:23 +0800)]
wifidog-ng: Update to 1.3.0
be35e54 Optimized by use ipset 2dcc126 Optimize kernel module code 08231b4 Remove url param of login api bf7b435 Support compile kernel module on ubuntu for test ffca07a Optimize kernel module b03c757 Optimize code
Sebastian Kemper [Sat, 24 Mar 2018 12:15:27 +0000 (13:15 +0100)]
mysql: remove $(FPIC), fix AARCH64 builds
mysql already makes sure that the compiler emits position-independent code when
appropriate, namely when compiling shared objects. The mysql build system puts
its own flag behind the CFLAGS, overriding whatever was set before.
Additionally, forcing applications into PIC mode will just slow them
down (mysql not only provides shared objects but also applications).
Last but not least OpenWrt's $(FPIC) can cause build failures. This is
the case currently for AARCH64:
net_serv.o: In function `my_net_init':
net_serv.cc:(.text+0x28): relocation truncated to fit: R_AARCH64_LD64_GOTPAGE_LO15 against symbol `my_malloc' defined in .text section in ../mysys/libmysys.a(my_malloc.o)
net_serv.cc:(.text+0x28): warning: Too many GOT entries for -fpic, please recompile with -fPIC
/data/bowl-builder/aarch64_cortex-a53/build/sdk/staging_dir/toolchain-aarch64_cortex-a53_gcc-7.3.0_musl/bin/../lib/gcc/aarch64-openwrt-linux-musl/7.3.0/../../../../aarch64-openwrt-linux-musl/bin/ld: final link failed: Symbol needs debug section which does not exist
collect2: error: ld returned 1 exit status
Makefile:955: recipe for target 'mysqld' failed
make[7]: *** [mysqld] Error 1
Remove $(FPIC) from TARGET_CFLAGS to address all of the above.
Sebastian Kemper [Sat, 24 Mar 2018 08:27:29 +0000 (09:27 +0100)]
glib2: fix build when res_nquery is not available
Upstream commit "gio: Port GThreadedResolver to use res_nquery() to fix
thread-safety" introduced a bug that causes compile failures on
platforms where res_nquery is unavailable. This patch fixes that.
Bug 794606 has been opened upstream: https://bugzilla.gnome.org/show_bug.cgi?id=794606
On the OpenWrt buildbots this bug is visible during the arc_archs
compile:
gthreadedresolver.c: In function 'do_lookup_records':
gthreadedresolver.c:875:16: error: 'res' undeclared (first use in this function); did you mean '_res'?
res_nclose (&res);
^~~
_res
gthreadedresolver.c:875:16: note: each undeclared identifier is reported only once for each function it appears in
Makefile:3334: recipe for target 'libgio_2_0_la-gthreadedresolver.lo' failed
make[8]: *** [libgio_2_0_la-gthreadedresolver.lo] Error 1
Marko Ratkaj [Fri, 23 Mar 2018 12:50:28 +0000 (13:50 +0100)]
utils: openzwave: disable examples and fix include
Patch 903 disables building of examples.
Patch 904 fixes the following issue:
When building software that build depends on openzwave, build will
always search in /usr/include/openzwave instead of
staging_dir/.../usr/include/openzwave.
Jeffery To [Sat, 17 Mar 2018 16:32:35 +0000 (00:32 +0800)]
golang: new packages
From golang.org:
The Go programming language is an open source project to make
programmers more productive.
This commit consists of two "parts":
* golang/host: Main Go compiler for host (installed to
STAGING_DIR_HOST/lib/go-cross), used to cross-compile Go programs to
be packaged.
* golang (and golang-src/golang-doc): Main Go compiler for on-target
development. These packages are quite large, but I would expect only
developers to install these.
Sebastian Kemper [Mon, 19 Mar 2018 22:51:04 +0000 (23:51 +0100)]
postgresql: fix build for ARC arch
When building for ARC the compile fails with:
/var/lib/buildbot/slaves/dave-builder/arc_arc700/build/sdk/build_dir/target-arc_arc700_uClibc/postgresql-9.6.5/src/include/storage/s_lock.h:899:2: error: #error PostgreSQL does not have native spinlock support on this platform. To continue the compilation, rerun configure using --disable-spinlocks. However, performance will be poor. Please report this to pgsql-bugs@postgresql.org.
#error PostgreSQL does not have native spinlock support on this platform. To continue the compilation, rerun configure using --disable-spinlocks. However, performance will be poor. Please report this to pgsql-bugs@postgresql.org.
So disable spinlocks when compiling for this arch. This was done
likewise for the avr32 target, which is not supported anymore, so this
can be deleted.
Sebastian Kemper [Mon, 19 Mar 2018 22:38:45 +0000 (23:38 +0100)]
postgresql: clean up CFLAGS
- The extra include is removed; the postgresql build system adds this
include by itself.
- '-lpthread' is removed; the postgresql build system is able to detect
how to access pthread features by itself.
- '$(FPIC)' is removed; adding this to CFLAGS is not recommendable:
a) The postgresql build system adds its own PIC flag behind OpenWrt's
CFLAGS when compiling shared objects, overriding OpenWrt's setting.
b) Forcing applications into PIC mode will just slow them down.
c) This leads to build failures on aarch64:
access/transam/commit_ts.o: In function `CommitTsPagePrecedes':
commit_ts.c:(.text+0x14): relocation truncated to fit: R_AARCH64_LD64_GOTPAGE_LO15 against symbol `TransactionIdPrecedes' defined in .text section in access/transam/transam.o
commit_ts.c:(.text+0x14): warning: Too many GOT entries for -fpic, please recompile with -fPIC
/var/lib/buildbot/slaves/dave-builder/aarch64_generic/build/sdk/staging_dir/toolchain-aarch64_generic_gcc-7.3.0_musl/bin/../lib/gcc/aarch64-openwrt-linux-musl/7.3.0/../../../../aarch64-openwrt-linux-musl/bin/ld: final link failed: Symbol needs debug section which does not exist
collect2: error: ld returned 1 exit status
Sebastian Kemper [Mon, 19 Mar 2018 02:43:39 +0000 (03:43 +0100)]
pulseaudio: fix non-NEON ARM compiles
PulseAudio in some cases does not detect the ARM CPU's capabilities
correctly and enables NEON ASM while it is not supported. For example
when compiling for arm_arm1176jzf-s_vfp the assembler rejects this and
the compile fails:
{standard input}: Assembler messages:
{standard input}:27: Error: selected processor does not support `vld1.16 {d0},[r1]!' in ARM mode
{standard input}:28: Error: selected processor does not support `vmovl.s16 q0,d0' in ARM mode
{standard input}:29: Error: selected FPU does not support instruction -- `vcvt.f32.s32 q0,q0,#15'
{standard input}:31: Error: selected processor does not support `vst1.32 {q0},[r2]!' in ARM mode
{standard input}:70: Error: selected processor does not support `vld1.32 {q0},[r1]!' in ARM mode
{standard input}:71: Error: selected FPU does not support instruction -- `vcvt.s32.f32 q0,q0,#31'
{standard input}:72: Error: selected processor does not support `vqrshrn.s32 d0,q0,#16' in ARM mode
{standard input}:74: Error: selected processor does not support `vst1.16 {d0},[r2]!' in ARM mode
Makefile:8668: recipe for target 'pulsecore/libpulsecore_sconv_neon_la-sconv_neon.lo' failed
To fix this tell PulseAudio explicitly when to use the NEON ASM and when
not to.
Eric Luehrsen [Tue, 13 Feb 2018 05:01:58 +0000 (00:01 -0500)]
unbound: add domain resolution control options
- Add domain_forward to permit designated domains to forward instead
of recurse as listed in resolve.conf.auto from DHCP WAN client
- Update rebind_protection and add rebind_interface to protect IP6
GLA locally just like RFC 1918 protection
- Rename trigger to trigger_interface with backwards compatability
- Update odhcpd script for efficiency handling many clients
Florian Eckert [Wed, 14 Mar 2018 10:57:02 +0000 (11:57 +0100)]
net/mwan3: deviate max interface value from mmx_mask value
We need always three of the firewall mask value for
* default routing table
* blackhole
* unreachable
the other will be used for the interfaces.
* If we have set the mmx_mask to max 0xFF00 (8 bit set) we could use max 252
interfaces.
* If we have set the mmx_mask to min 0x0E00 (3 bit set) we could use max 4
interfaces.
Only the ones are counting from the firewall mask value.
Minimal three firewall mask bit vaules must be set.
Maximal eight firewall mask bit vaules could be set.
Table overview mmx_mask value bits vs. max interfaces
mmx_mask value bits set 1 -> not usefull
mmx_mask value bits set 2 -> not usefull
mmx_mask value bits set 3 -> 4 Interfaces (mask example 0x0E)
mmx_mask value bits set 4 -> 12 Interfaces
mmx_mask value bits set 5 -> 28 Interfaces
mmx_mask value bits set 6 -> 60 Interfaces
mmx_mask value bits set 7 -> 124 Interfaces
mmx_mask value bits set 8 -> 252 Interfaces (mask example 0xFF)
Florian Eckert [Tue, 6 Mar 2018 14:44:50 +0000 (15:44 +0100)]
net/mwan3: add connected/disconnected ACTION to mwan3track
Add a new ACTIONs:
* connected ACTION is called once if mwan3track reach all configured track_ips
* disconnected ACTION is called once if mwan3track is unable to reach the track_ips
The connected/disconnected will called only by mwan3track in opposite
the ACTIONs ifup/ifdown will also be called by netifd.
I've quasi-backported (could not find a single commit which fixes these
particular issues) https://github.com/coova/coova-chilli 's formatting
on the impacted sections, and it compiles.
Once a new version is added to the feed this patch can likely be
dropped.
haproxy: Update MEDIUM+ patches for HAProxy v1.8.4
- Add new MEDIUM+ patches (see https://www.haproxy.org/bugs/bugs-1.8.4.html)
- Raise patch-level to 02
Yousong Zhou [Wed, 14 Mar 2018 06:47:05 +0000 (14:47 +0800)]
openvswitch: bump to version 2.8.2
Changes since 2.8.2 as recorded in NEWS-2.8.2
- NSH implementation now conforms to latest draft (draft-ietf-sfc-nsh-28).
- Bug fixes
0006-adapt-ovs-scripts.patch was splited into two separate patches as
the original patch does not apply against 2.8.2 anymore. Other patches
are just re-numbered without actual function change
Report https://github.com/openwrt/packages/issues/5638
It was mentioned that this causes build failures on Mac OS X.
The default behavior [in the setup.py script] is to check whether
`--with-system-ffi` is present in the CONFIG_ARGS env var.
However that back-fires a bit when `--with-system-ffi=no`, because the
condition `not '--with-system-ffi' in sysconfig.get_config_var("CONFIG_ARGS")`
evaluates to true.
This is a small bug in the `setup.py` script, but it looks like the
easiest/cleanest way to address it on our end is to just remove it entirely
from the HOST_CONFIGURE_ARGS.
At least that's how it looks like when testing on a Linux machine.
Karl Palsson [Tue, 6 Mar 2018 16:57:54 +0000 (16:57 +0000)]
pagekitec: add new package
From the package description:
PageKite is a system for running publicly visible servers (generally
web servers) on machines without a direct connection to the Internet,
such as mobile devices or computers behind restrictive firewalls.
PageKite works around NAT, firewalls and IP-address limitations by
using a combination of tunnels and reverse proxies.
This package provides an implementation of the PageKite Protocol in C,
optimized for high-performance or embedded applications.
Florian Eckert [Thu, 9 Nov 2017 10:50:55 +0000 (11:50 +0100)]
net/mwan3: add jshn and ip-full to package dependency
* The mwan3 scripts sources ". /usr/share/libubox/jshn.sh"
* Mwan3 only works if ip-full is installed
Error -> "ip: invalid argument '0xfd00/0xff00' to 'fwmark'"
git.99rst.org / openwrt-packages.git / log