Jeffery To [Mon, 4 Nov 2019 18:20:37 +0000 (02:20 +0800)]
python: Remove PKG_BUILD_DIR/PKG_UNPACK sections from readme
PKG_BUILD_DIR now takes variants into account
(openwrt/openwrt@e545fac8d968864a965edb9e50c6f90940b0a6c9), so it should
not be necessary for Python packages to set these variables anymore.
Florian Eckert [Mon, 4 Nov 2019 12:24:34 +0000 (13:24 +0100)]
keepalived: set default run directory for pid file on build
This fixes a runtime startup error on system which does not have a
toplevel runtime directory for the pid file. On openwrt the pid is
located at /var/run and not on /run. To fix that add a configure option to
move the pid location to /var/run.
This issue was introduced after upgrading to 3.8.
Patch `006-remove-multi-arch-and-local-paths.patch` was dropped. It was
tested on x86, but when using the x86_64 compiler in OpenWrt, the issue is
present.
The issue seems to be about Ubuntu/Debian's multi-arch support in
Python/Python3 setup [which I forgot about]. The code runs it regardless of
whether it cross-compiles or not, and for OpenWrt, this causes issues, as
it introduces absolute include paths from the host system.
Hannu Nyman [Sun, 3 Nov 2019 15:48:11 +0000 (17:48 +0200)]
collectd: adjust reaction to ntp time at boot time
Adjust the reaction to a polling interval timestamp that references
to a past time.
Past timestamps can happen when ntpd adjusts router's time after network
connectivity is obtained after boot. Collectd shows warnings for each plugin
as it tries to enter new values with the same timestamp as the previous one.
This patch adjusts the next polling time to be now+2 seconds for the main
loop and for the plugin-specific read loops. That avoids the warnings, but
does not overreact in case there are shorter polling intervals or the time
gets adjusted for other reasons.
Additionally some debug statements are aded, but they are visible only
when --enable-debug configure option is used in Makefile.
Dirk Brenken [Sun, 3 Nov 2019 15:44:22 +0000 (16:44 +0100)]
banip: update 0.3.5
* fix race condition in download utility detection during boot
* fix multiple possible bugs in ipset creation
* prevent parallel service starts
* refine service trigger handling
* add ssh daemon auto detection
* print to stdout if 'logger' is not available
Rosen Penev [Sun, 3 Nov 2019 04:54:54 +0000 (21:54 -0700)]
glib2: Disable Werror
On GCC9, it throws a Wformat-nonliteral error. Unfortunately, there's no
easy was to fix it as it is fortify-headers where the warning ultimately
comes from.
Rosen Penev [Sat, 2 Nov 2019 23:02:59 +0000 (16:02 -0700)]
fdk-aac: Add fdk-aac-free for non BUILD_PATENTED configurations
The core parts of AAC were patented back in 1998. Those patents have
expired.
Some of the newer AAC features involved with HE-AAC are still patented.
These patches are taken from fedora where they remove all patented
functionality.
Note that LC-AAC comprises the majority of AAC content. HE-AAC is for low
bitrate stuff like audiobooks.
Patches come from Fedora where this is also distributed.
Local compiles show a 40% size reduction in the final ipk.
objects/fileio.o: In function `readfile':
fileio.c:(.text+0x5b3f): undefined reference to `libiconv_close'
fileio.c:(.text+0x61ad): undefined reference to `libiconv_close'
fileio.c:(.text+0x62f6): undefined reference to `libiconv'
fileio.c:(.text+0x6794): undefined reference to `libiconv_close'
objects/fileio.o: In function `buf_write_bytes':
fileio.c:(.text+0xa1fe): undefined reference to `libiconv'
fileio.c:(.text+0xa54a): undefined reference to `libiconv'
objects/fileio.o: In function `buf_write':
fileio.c:(.text+0xaf48): undefined reference to `libiconv_close'
objects/mbyte.o: In function `my_iconv_open.part.18':
mbyte.c:(.text+0x2ced): undefined reference to `libiconv_open'
mbyte.c:(.text+0x2d3a): undefined reference to `libiconv'
mbyte.c:(.text+0x2d5f): undefined reference to `libiconv_close'
objects/mbyte.o: In function `convert_setup_ext':
mbyte.c:(.text+0x33bf): undefined reference to `libiconv_close'
objects/mbyte.o: In function `string_convert_ext':
mbyte.c:(.text+0x363c): undefined reference to `libiconv'
collect2: error: ld returned 1 exit status
link.sh: Linking failed
Makefile:1949: recipe for target 'vim' failed
This is addressed by pulling in libiconv/host. Also configure switches
are added that keep external dependencies to a minimum, for instance
avoiding to link to X11 or gettext.
* libsane dependency on libusb moved to those drivers that requires it
* clean up some ./configure args
* added saned-ricoh2 for new backend
* enabled saned-gphoto2 (after c8fbe26c532aced97ab8a4d42f1289db2a3e6d65)
* disabled kvs40xx and mustek_usb2 that requires pthread while the issue is
not solved (https://gitlab.com/sane-project/backends/issues/153)
* patches refreshed:
- 002-remove-uneeded.patch
* patches dropped:
- 031-fix_uclibc.patch
- 050-remove_linked_libs_for_unused_preload.patch (with --disable-preload)
Signed-off-by: Luiz Angelo Daros de Luca <redacted>
Peter Stadler [Sun, 27 Oct 2019 20:23:56 +0000 (21:23 +0100)]
sqlparse: add python3 package
This is a dependency for django-cors-headers.
Install sqlformat without using pkg-resources:
Upstream uses the entry_point function to call the __main__.py script.
We copy it for avoiding the dependency on pkg_resources and full python3 in turn.
Alberto Bursi [Thu, 31 Oct 2019 13:03:47 +0000 (14:03 +0100)]
modemmanager: enable mbim/qmi support by default
MBIM and QMI support (necessary for modern and
high-performance LTE modems) should be default
y otherwise the only way to use modemmanager
with these protocols is to recompile the package.
This is very inconvenient for most end users.
Ansuel Smith [Fri, 25 Oct 2019 01:27:03 +0000 (03:27 +0200)]
nginx: adds ubus external module
- Adds ubus module to nginx
- Select module by default
- Adds script to detect ubus module and append config for luci
- Switch all external module to xz
git.99rst.org / openwrt-packages.git / log