- remove obsolete patches and update other ones
- filter support is now available as an extension module
- php7-mod-hash: this extension is now part of the core binary
and cannot be built as an extension module anymore
- php7-mod-gd:
- do not use bundled libgd, but rely on external one
- this also obsoletes dependencies and configuration options
- php7-mod-zip: requires external libzip now
The ModemManager protocol handler checks for the pppd daemon during
the initialization, and if it doesn't exist, the protocol handler is
not even loaded by netifd.
This is because the IP method to use on the connection of a given
modem is not known until ModemManager reports via its interfaces how
the modem should be connected (either using PPP, with DHCP, or with
explicit IP settings).
Daniel Golle [Wed, 18 Dec 2019 21:32:06 +0000 (23:32 +0200)]
gnunet: revert accidentally committed version bump
0.12.0 tarballs aren't out yet, I accidentally committed the changed
version in commit b6a9bd3bf3a748bda8272eb639f0ea8a7fd8c57c
("gnurl: update to version 7.67.0").
Revert gnunet back to 0.11.8.
Reported-by: Sebastian Kemper <redacted> Signed-off-by: Daniel Golle <redacted>
msmtp-scripts: Remove as abandoning upstream; msmtp-queue works
I am upstream for msmtp-scripts and have decided to abandon the project. Therefore
remove msmtp-scripts from OpenWrt -- there is already msmtp-queue which is 'good enough'
for the use cases where msmtp-scripts had any relevance.
Karel Kočí [Mon, 13 May 2019 11:38:04 +0000 (13:38 +0200)]
shadow: change default encryption method from DES to SHA512
Busybox in default uses SHA512 as well.
On big ditribution this default is sourced from PAM. That means that
shadow reads pam settings and uses that. OpenWrt in most cases does not
have PAM installed and in such case shadow fallbacks to its own default
which is DES. This just changes that default to SHA512 which is
consistent with rest of the system.
Jo-Philipp Wich [Wed, 18 Dec 2019 08:32:38 +0000 (09:32 +0100)]
cgi-io: close pipe descriptors early
In the command read side, close the superfluous write end of the pipe
early to ensure that EOF is reliably detected. Without that change, splice
calls to read from the pipe will occasionally hang until the CGI process
is eventually killed due to timeout.
Gerard Ryan [Sun, 15 Dec 2019 06:04:44 +0000 (16:04 +1000)]
https_dns_proxy: Added optional ipv4 resolvers
* Added optional ipv4 resolvers UCI config option
* Added logging to logd
* Refactored verbosity UCI config option
* Filtered out any address from being added to dnsmasq
Karel Kočí [Wed, 18 Dec 2019 08:57:23 +0000 (09:57 +0100)]
zsh: fix invalid postrm script and little refactor of scripts
The postrm script was missing shebang. Postrm scripts are packaged and
executed directly and not sourced by default script (as in case of prerm
and postinst).
Also move some indents around to not confuse reader. The section in
postinst was indented to same level as grep "condition" but is on same
level as initial grep (not part of that "condition").
Sebastian Kemper [Mon, 16 Dec 2019 22:33:30 +0000 (23:33 +0100)]
libzip: fix musl-fts failure
musl doesn't support fts. But with the extra package musl-fts installed,
libzip picks up the fts header and fails at the linking stage:
zipcmp.c:(.text.startup+0x130): undefined reference to `fts_open'
/home/sk/tmp/openwrt/staging_dir/toolchain-mips_24kc_gcc-8.3.0_musl/lib/gcc/mips-openwrt-linux-musl/8.3.0/../../../../mips-openwrt-linux-musl/bin/ld: zipcmp.c:(.text.startup+0x172): undefined reference to `fts_read'
So with musl-fts we need to link in libfts. To address that this commits
patches the cmake setup to check if fts is available in libc itself or
in any external libfts.
So when musl-fts is installed on the system the setup will be the
following:
musl: use libfts
uclibc: use fts from libc
glibc: like uclibc
Sebastian Kemper [Sun, 15 Dec 2019 09:44:05 +0000 (10:44 +0100)]
tinycdb: install shared lib and pic archive
dnsdist picks up cdb.h but can't link in the static archive.
/home/sk/tmp/openwrt/staging_dir/toolchain-mips_24kc_gcc-8.3.0_musl/lib/gcc/mips-openwrt-linux-musl/8.3.0/../../../../mips-openwrt-linux-musl/bin/ld: /home/sk/tmp/openwrt/staging_dir/target-mips_24kc_musl/usr/lib/libcdb.a(cdb_init.o): relocation R_MIPS_26 against `fstat' can not be used when making a shared object; recompile with -fPIC
This commit extends the tinycdb Makefile to build and install as well
the shared library as well as the pic archive. dnsdist will then pick
the shared library.
Leonid Esman [Thu, 28 Nov 2019 09:45:39 +0000 (12:45 +0300)]
nlohmannjson: initial commit
JSON for Modern C++ library.
Design goals: intuitive syntax, trivial integration, serious testing.
https://nlohmann.github.io/json/
IPFS C++ HTTP API client library depends on this library.
Sebastian Kemper [Sat, 14 Dec 2019 16:37:56 +0000 (17:37 +0100)]
dnsdist: add missing build dep on protoc
The build needs protoc, otherwise it fails.
checking if we need to link in protobuf... yes
checking for PROTOBUF... yes
checking for protoc... no
configure: error: Protobuf requested but the protobuf compiler was not found
Sebastian Kemper [Sat, 14 Dec 2019 16:34:54 +0000 (17:34 +0100)]
dnsdist: add missing lmdb dep
Currently dnsdist is failing at packaging stage when lmdb is in staging:
make[4]: Leaving directory '/builder/shared-workdir/build/sdk/build_dir/target-x86_64_musl/dnsdist-1.4.0'
Package dnsdist is missing dependencies for the following libraries:
liblmdb.so
Makefile:109: recipe for target '/builder/shared-workdir/build/sdk/bin/packages/x86_64/packages/dnsdist_1.4.0-2_x86_64.ipk' failed
Sebastian Kemper [Sat, 14 Dec 2019 11:21:32 +0000 (12:21 +0100)]
protobuf: fix libdir handling for host build
On some host machines (example: Gentoo amd64 no-multilib) by default
cmake will install libraries to lib64. But in OpenWrt the correct libdir
is lib (for instance the RPATH is set to lib). So you may end up with
libraries in lib64 while RPATH points to lib:
sk@darth ~/tmp/openwrt $ ldd staging_dir/hostpkg/bin/protoc
linux-vdso.so.1 (0x00007ffc741ea000)
libprotoc.so.3.8.0.0 => not found
libprotobuf.so.3.8.0.0 => not found
libpthread.so.0 => /lib64/libpthread.so.0 (0x00007f0a8f7ea000)
libstdc++.so.6 => /usr/lib/gcc/x86_64-pc-linux-gnu/9.2.0/libstdc++.so.6 (0x00007f0a8f572000)
libm.so.6 => /lib64/libm.so.6 (0x00007f0a8f427000)
libgcc_s.so.1 => /usr/lib/gcc/x86_64-pc-linux-gnu/9.2.0/libgcc_s.so.1 (0x00007f0a8f40d000)
libc.so.6 => /lib64/libc.so.6 (0x00007f0a8f23c000)
/lib64/ld-linux-x86-64.so.2 (0x00007f0a8f827000)
sk@darth ~/tmp/openwrt $
Fix this by specifying the libdir during host builds.
git.99rst.org / openwrt-packages.git / log