Jeff King [Thu, 19 Oct 2017 20:24:03 +0000 (16:24 -0400)]
t4015: refactor --color-moved whitespace test
In preparation for testing several different whitespace
options, let's split out the setup and cleanup steps of the
whitespace test.
While we're here, let's also switch to using "<<-" to indent
our here-documents properly, and use q_to_tab to more
explicitly mark where we expect whitespace to appear.
Signed-off-by: Jeff King <redacted> Signed-off-by: Junio C Hamano <redacted>
Junio C Hamano [Thu, 19 Oct 2017 05:45:45 +0000 (14:45 +0900)]
Merge branch 'dg/filter-branch-filter-order-doc'
Update the documentation for "git filter-branch" so that the filter
options are listed in the same order as they are applied, as
described in an earlier part of the doc.
* dg/filter-branch-filter-order-doc:
doc: list filter-branch subdirectory-filter first
Junio C Hamano [Thu, 19 Oct 2017 05:45:44 +0000 (14:45 +0900)]
Merge branch 'jc/fetch-refspec-doc-update'
"git fetch <there> <src>:<dst>" allows an object name on the <src>
side when the other side accepts such a request since Git v2.5, but
the documentation was left stale.
* jc/fetch-refspec-doc-update:
fetch doc: src side of refspec could be full SHA-1
Nathan Payre [Wed, 18 Oct 2017 20:27:16 +0000 (22:27 +0200)]
config doc: clarify "git config --path" example
Change the word "bla" to "section.variable"; "bla" is a placeholder
for a variable name but it wasn't clear for everyone.
While we're here, also reformat this sample command line to use
monospace instead of italics, to better match the rest of the file.
Use a space instead of a dash in "git config", as is common in the
rest of Git's documentation.
Reported-by: Robert P. J. Day <redacted> Signed-off-by: MOY Matthieu <redacted> Signed-off-by: Daniel Bensoussan <redacted> Signed-off-by: Timothee Albertin <redacted> Signed-off-by: Nathan Payre <redacted> Signed-off-by: Junio C Hamano <redacted>
Junio C Hamano [Wed, 18 Oct 2017 05:20:43 +0000 (14:20 +0900)]
Merge branch 'jk/ref-filter-colors-fix' into maint
This is the "theoretically more correct" approach of simply
stepping back to the state before plumbing commands started paying
attention to "color.ui" configuration variable.
* jk/ref-filter-colors-fix:
tag: respect color.ui config
Revert "color: check color.ui in git_default_config()"
Revert "t6006: drop "always" color config tests"
Revert "color: make "always" the same as "auto" in config"
color: make "always" the same as "auto" in config
provide --color option for all ref-filter users
t3205: use --color instead of color.branch=always
t3203: drop "always" color test
t6006: drop "always" color config tests
t7502: use diff.noprefix for --verbose test
t7508: use test_terminal for color output
t3701: use test-terminal to collect color output
t4015: prefer --color to -c color.diff=always
test-terminal: set TERM=vt100
Junio C Hamano [Wed, 18 Oct 2017 05:19:12 +0000 (14:19 +0900)]
Merge branch 'jk/validate-headref-fix' into maint
Code clean-up.
* jk/validate-headref-fix:
validate_headref: use get_oid_hex for detached HEADs
validate_headref: use skip_prefix for symref parsing
validate_headref: NUL-terminate HEAD buffer
Junio C Hamano [Wed, 18 Oct 2017 05:19:06 +0000 (14:19 +0900)]
Merge branch 'tb/ref-filter-empty-modifier' into maint
In the "--format=..." option of the "git for-each-ref" command (and
its friends, i.e. the listing mode of "git branch/tag"), "%(atom:)"
(e.g. "%(refname:)", "%(body:)" used to error out. Instead, treat
them as if the colon and an empty string that follows it were not
there.
* tb/ref-filter-empty-modifier:
ref-filter.c: pass empty-string as NULL to atom parsers
Junio C Hamano [Wed, 18 Oct 2017 05:19:04 +0000 (14:19 +0900)]
Merge branch 'tg/memfixes' into maint
Fixes for a handful memory access issues identified by valgrind.
* tg/memfixes:
sub-process: use child_process.args instead of child_process.argv
http-push: fix construction of hex value from path
path.c: fix uninitialized memory access
Junio C Hamano [Wed, 18 Oct 2017 05:19:03 +0000 (14:19 +0900)]
Merge branch 'rs/mailinfo-qp-decode-fix' into maint
"git mailinfo" was loose in decoding quoted printable and produced
garbage when the two letters after the equal sign are not
hexadecimal. This has been fixed.
Junio C Hamano [Wed, 18 Oct 2017 05:19:01 +0000 (14:19 +0900)]
Merge branch 'jk/describe-omit-some-refs' into maint
"git describe --match" learned to take multiple patterns in v2.13
series, but the feature ignored the patterns after the first one
and did not work at all. This has been fixed.
* jk/describe-omit-some-refs:
describe: fix matching to actually match all patterns
Junio C Hamano [Wed, 18 Oct 2017 05:18:59 +0000 (14:18 +0900)]
Merge branch 'aw/gc-lockfile-fscanf-fix' into maint
"git gc" tries to avoid running two instances at the same time by
reading and writing pid/host from and to a lock file; it used to
use an incorrect fscanf() format when reading, which has been
corrected.
* aw/gc-lockfile-fscanf-fix:
gc: call fscanf() with %<len>s, not %<len>c, when reading hostname
Junio C Hamano [Wed, 18 Oct 2017 05:18:58 +0000 (14:18 +0900)]
Merge branch 'rk/commit-tree-make-F-verbatim' into maint
Unlike "git commit-tree < file", "git commit-tree -F file" did not
pass the contents of the file verbatim and instead completed an
incomplete line at the end, if exists. The latter has been updated
to match the behaviour of the former.
* rk/commit-tree-make-F-verbatim:
commit-tree: do not complete line in -F input
Junio C Hamano [Wed, 18 Oct 2017 05:18:58 +0000 (14:18 +0900)]
Merge branch 'mm/send-email-cc-cruft' into maint
In addition to "cc: <redacted> # cruft", "cc: a@dd.re.ss # cruft"
was taught to "git send-email" as a valid way to tell it that it
needs to also send a carbon copy to <redacted> in the trailer
section.
* mm/send-email-cc-cruft:
send-email: don't use Mail::Address, even if available
send-email: fix garbage removal after address
Junio C Hamano [Wed, 18 Oct 2017 02:34:31 +0000 (11:34 +0900)]
branch doc: sprinkle a few commas for readability
The "--force" option can also be used when the named branch does not
yet exist, and the point of the option is the user can (re)point the
branch to the named commit even if it does. Add 'even' before 'if'
to clarify. Also, insert another comma after "Without -f" before
"the command refuses..." to make the text easier to parse.
Incidentally, this change should help certain versions of
docbook-xsl-stylesheets that render the original without any
whitespace between "-f" and "git".
Noticed-by: Lars Schneider <redacted> Helped-by: Jeff King <redacted> Helped-by: Andreas Schwab <redacted> Signed-off-by: Junio C Hamano <redacted>
Junio C Hamano [Wed, 18 Oct 2017 01:19:08 +0000 (10:19 +0900)]
Merge branch 'jk/ref-filter-colors-fix'
This is the "theoretically more correct" approach of simply
stepping back to the state before plumbing commands started paying
attention to "color.ui" configuration variable.
Let's run with this one.
* jk/ref-filter-colors-fix:
tag: respect color.ui config
Revert "color: check color.ui in git_default_config()"
Revert "t6006: drop "always" color config tests"
Revert "color: make "always" the same as "auto" in config"
Junio C Hamano [Tue, 17 Oct 2017 07:12:34 +0000 (00:12 -0700)]
check-ref-format doc: --branch validates and expands <branch>
"git check-ref-format --branch $name" feature was originally
introduced (and was advertised) as a way for scripts to take any
end-user supplied string (like "master", "@{-1}" etc.) and see if it
is usable when Git expects to see a branch name, and also obtain the
concrete branch name that the at-mark magic expands to.
Emphasize that "see if it is usable" role in the description and
clarify that the @{...} expansion only occurs when run from within a
repository.
[jn: split out from a larger patch]
Helped-by: Jeff King <redacted> Signed-off-by: Junio C Hamano <redacted> Signed-off-by: Jonathan Nieder <redacted> Signed-off-by: Junio C Hamano <redacted>
Junio C Hamano [Tue, 17 Oct 2017 07:10:00 +0000 (00:10 -0700)]
check-ref-format --branch: strip refs/heads/ using skip_prefix
The expansion returned from strbuf_check_branch_ref always starts with
"refs/heads/" by construction, but there is nothing about its name or
advertised API making that obvious. This command is used to process
human-supplied input from the command line and is usually not the
inner loop, so we can spare some cycles to be more defensive. Instead
of hard-coding the offset strlen("refs/heads/") to skip, verify that
the expansion actually starts with refs/heads/.
[jn: split out from a larger patch, added explanation]
Signed-off-by: Junio C Hamano <redacted> Signed-off-by: Jonathan Nieder <redacted> Signed-off-by: Junio C Hamano <redacted>
This is because the expansion of @{-1} must come from the HEAD reflog,
which involves opening the repository. @{u} and @{push} (which are
more unusual because they typically would not expand to a local
branch) trigger the same assertion.
This has been broken since day one. Before v2.13.0-rc0~48^2
(setup_git_env: avoid blind fall-back to ".git", 2016-10-02), the
breakage was more subtle: Git would read reflogs from ".git" within
the current directory even if it was not a valid repository. Usually
that is harmless because Git is not being run from the root directory
of an invalid repository, but in edge cases such accesses can be
confusing or harmful. Since v2.13.0, the problem is easier to
diagnose because Git aborts with a BUG message.
Erroring out is the right behavior: when asked to interpret a branch
name like "@{-1}", there is no reasonable answer in this context.
But we should print a message saying so instead of an assertion failure.
We do not forbid "check-ref-format --branch" from outside a repository
altogether because it is ok for a script to pre-process branch
arguments without @{...} in such a context. For example, with
pre-2.13 Git, a script that does
branch='master'; # default value
parse_options
branch=$(git check-ref-format --branch "$branch")
to normalize an optional branch name provided by the user would work
both inside a repository (where the user could provide '@{-1}') and
outside (where '@{-1}' should not be accepted).
So disable the "expand @{...}" half of the feature when run outside a
repository, but keep the check of the syntax of a proposed branch
name. This way, when run from outside a repository, "git
check-ref-format --branch @{-1}" will gracefully fail:
$ git check-ref-format --branch @{-1}
fatal: '@{-1}' is not a valid branch name
and "git check-ref-format --branch master" will succeed as before:
$ git check-ref-format --branch master
master
restoring the usual pre-2.13 behavior.
[jn: split out from a larger patch; moved conditional to
strbuf_check_branch_ref instead of its caller; fleshed out commit
message; some style tweaks in tests]
Reported-by: Marko Kungla <redacted> Helped-by: Jeff King <redacted> Signed-off-by: Junio C Hamano <redacted> Signed-off-by: Jonathan Nieder <redacted> Signed-off-by: Junio C Hamano <redacted>
Junio C Hamano [Tue, 17 Oct 2017 02:31:06 +0000 (11:31 +0900)]
fetch doc: src side of refspec could be full SHA-1
Since a9d34933 ("Merge branch 'fm/fetch-raw-sha1'", 2015-06-01) we
allow to fetch by an object name when the other side accepts such a
request, but we never updated the documentation to match.
Signed-off-by: Junio C Hamano <redacted> Reviewed-by: Jonathan Nieder <redacted> Signed-off-by: Junio C Hamano <redacted>
Jeff King [Fri, 13 Oct 2017 17:26:02 +0000 (13:26 -0400)]
tag: respect color.ui config
Since 11b087adfd (ref-filter: consult want_color() before
emitting colors, 2017-07-13), we expect that setting
"color.ui" to "always" will enable color tag formats even
without a tty. As that commit was built on top of 136c8c8b8f (color: check color.ui in git_default_config(),
2017-07-13) from the same series, we didn't need to touch
tag's config parsing at all.
However, since we reverted 136c8c8b8f, we now need to
explicitly call git_color_default_config() to make this
work.
Let's do so, and also restore the test dropped in 0c88bf5050
(provide --color option for all ref-filter users,
2017-10-03). That commit swapped out our "color.ui=always"
test for "--color" in preparation for "always" going away.
But since it is here to stay, we should test both cases.
Note that for-each-ref also lost its color.ui support as
part of reverting 136c8c8b8f. But as a plumbing command, it
should _not_ respect the color.ui config. Since it also
gained a --color option in 0c88bf5050, that's the correct
way to ask it for color. We'll continue to test that, and
confirm that "color.ui" is not respected.
Signed-off-by: Jeff King <redacted> Signed-off-by: Junio C Hamano <redacted>
That commit was trying to address a bug caused by 4c7f1819b3
(make color.ui default to 'auto', 2013-06-10), in which
plumbing like diff-tree defaulted to "auto" color, but did
not respect a "color.ui" directive to disable it.
But it also meant that we started respecting "color.ui" set
to "always". This was a known problem, but 4c7f1819b3 argued
that nobody ought to be doing that. However, that turned out
to be wrong, and we got a number of bug reports related to
"add -p" regressing in v2.14.2.
Let's revert 136c8c8b8, fixing the regression to "add -p".
This leaves the problem from 4c7f1819b3 unfixed, but:
1. It's a pretty obscure problem in the first place. I
only noticed it while working on the color code, and we
haven't got a single bug report or complaint about it.
2. We can make a more moderate fix on top by respecting
"never" but not "always" for plumbing commands. This
is just the minimal fix to go back to the working state
we had before v2.14.2.
Note that this isn't a pure revert. We now have a test in
t3701 which shows off the "add -p" regression. This can be
flipped to success.
Signed-off-by: Jeff King <redacted> Signed-off-by: Junio C Hamano <redacted>
That commit was done primarily to prepare for the weakening
of "always" in 6be4595edb (color: make "always" the same as
"auto" in config, 2017-10-03). But since we've now reverted 6be4595edb, there's no need for us to remove "-c
color.ui=always" from the tests. And in fact it's a good
idea to restore these tests, to make sure that "always"
continues to work.
Signed-off-by: Jeff King <redacted> Signed-off-by: Junio C Hamano <redacted>
That commit weakened the "always" setting of color config so
that it acted as "auto". This was meant to solve regressions
in v2.14.2 in which setting "color.ui=always" in the on-disk
config broke scripts like add--interactive, because the
plumbing diff commands began to generate color output.
This was due to 136c8c8b8f (color: check color.ui in
git_default_config(), 2017-07-13), which was in turn trying
to fix issues caused by 4c7f1819b3 (make color.ui default to
'auto', 2013-06-10). But in weakening "always", we created
even more problems, as people expect to be able to use "git
-c color.ui=always" to force color (especially because some
commands don't have their own --color flag). We can fix that
by special-casing the command-line "-c", but now things are
getting pretty confusing.
Instead of piling hacks upon hacks, let's start peeling off
the hacks. The first step is dropping the weakening of
"always", which this revert does.
Note that we could actually revert the whole series merged
in by da15b78e52642bd45fd5513ab0000fdf2e58a6f4. Most of that
series consists of preparations to the tests to handle the
weakening of "-c color.ui=always". But it's worth keeping
for a few reasons:
- there are some other preparatory cleanups, like e433749d86 (test-terminal: set TERM=vt100, 2017-10-03)
- it adds "--color" options more consistently in 0c88bf5050 (provide --color option for all ref-filter
users, 2017-10-03)
- some of the cases dropping "-c" end up being more robust
and realistic tests, as in 01c94e9001 (t7508: use
test_terminal for color output, 2017-10-03)
- the preferred tool for overriding config is "--color",
and we should be modeling that consistently
We can individually revert the few commits necessary to
restore some useful tests (which will be done on top of this
patch).
Note that this isn't a pure revert; we'll keep the test
added in t3701, but mark it as failure for now.
Signed-off-by: Jeff King <redacted> Signed-off-by: Junio C Hamano <redacted>
Junio C Hamano [Tue, 17 Oct 2017 06:08:31 +0000 (15:08 +0900)]
Merge branch 'jk/ui-color-always-to-auto-maint' (early part) into jk/ref-filter-colors-fix-maint
* 'jk/ui-color-always-to-auto-maint' (early part):
color: make "always" the same as "auto" in config
provide --color option for all ref-filter users
t3205: use --color instead of color.branch=always
t3203: drop "always" color test
t6006: drop "always" color config tests
t7502: use diff.noprefix for --verbose test
t7508: use test_terminal for color output
t3701: use test-terminal to collect color output
t4015: prefer --color to -c color.diff=always
test-terminal: set TERM=vt100
Junio C Hamano [Tue, 17 Oct 2017 05:04:43 +0000 (14:04 +0900)]
t5601: rm the target file of cp that could still be executing
"while sh t5601-clone.sh; do :; done" seems to fail sporadically at
around test #45 where fake-ssh wrapper is copied create plink.exe,
with an error message that says the "text is busy".
I have a mild suspicion that the root cause of the bug is that the
fake SSH process from the previous test is still running by the time
the next test wants to replace it with a new binary, but in the
meantime, removing the target that could still be executing before
copying something else over seems to work it around.
Kevin Daudt [Mon, 16 Oct 2017 18:35:11 +0000 (20:35 +0200)]
column: show auto columns when pager is active
When columns are set to automatic for git tag and the output is
paginated by git, the output is a single column instead of multiple
columns.
Standard behaviour in git is to honor auto values when the pager is
active, which happens for example with commands like git log showing
colors when being paged.
Since ff1e72483 (tag: change default of `pager.tag` to "on",
2017-08-02), the pager has been enabled by default, exposing this
problem to more people.
finalize_colopts in column.c only checks whether the output is a TTY to
determine if columns should be enabled with columns set to auto. Also
check if the pager is active.
Adding a test for git column is possible but requires some care to work
around a race on stdin. See commit 18d8c2693 (test_terminal: redirect
child process' stdin to a pty, 2015-08-04). Test git tag instead, since
that does not involve stdin, and since that was the original motivation
for this patch.
Helped-by: Rafael Ascensão <redacted> Signed-off-by: Kevin Daudt <redacted> Signed-off-by: Junio C Hamano <redacted>
Jonathan Tan [Mon, 16 Oct 2017 17:55:32 +0000 (10:55 -0700)]
Documentation: document Extra Parameters
Document the server support for Extra Parameters, additional information
that the client can send in its first message to the server during a
Git client-server interaction.
Signed-off-by: Jonathan Tan <redacted> Signed-off-by: Brandon Williams <redacted> Signed-off-by: Junio C Hamano <redacted>
Brandon Williams [Mon, 16 Oct 2017 17:55:31 +0000 (10:55 -0700)]
ssh: introduce a 'simple' ssh variant
When using the 'ssh' transport, the '-o' option is used to specify an
environment variable which should be set on the remote end. This allows
git to send additional information when contacting the server,
requesting the use of a different protocol version via the
'GIT_PROTOCOL' environment variable like so: "-o SendEnv=GIT_PROTOCOL".
Unfortunately not all ssh variants support the sending of environment
variables to the remote end. To account for this, only use the '-o'
option for ssh variants which are OpenSSH compliant. This is done by
checking that the basename of the ssh command is 'ssh' or the ssh
variant is overridden to be 'ssh' (via the ssh.variant config).
Other options like '-p' and '-P', which are used to specify a specific
port to use, or '-4' and '-6', which are used to indicate that IPV4 or
IPV6 addresses should be used, may also not be supported by all ssh
variants.
Currently if an ssh command's basename wasn't 'plink' or
'tortoiseplink' git assumes that the command is an OpenSSH variant.
Since user configured ssh commands may not be OpenSSH compliant, tighten
this constraint and assume a variant of 'simple' if the basename of the
command doesn't match the variants known to git. The new ssh variant
'simple' will only have the host and command to execute ([username@]host
command) passed as parameters to the ssh command.
Update the Documentation to better reflect the command-line options sent
to ssh commands based on their variant.
Reported-by: Jeffrey Yasskin <redacted> Signed-off-by: Brandon Williams <redacted> Signed-off-by: Junio C Hamano <redacted>
Brandon Williams [Mon, 16 Oct 2017 17:55:28 +0000 (10:55 -0700)]
connect: tell server that the client understands v1
Teach the connection logic to tell a serve that it understands protocol
v1. This is done in 2 different ways for the builtin transports, both
of which ultimately set 'GIT_PROTOCOL' to 'version=1' on the server.
1. git://
A normal request to git-daemon is structured as
"command path/to/repo\0host=..\0" and due to a bug introduced in 49ba83fb6 (Add virtualization support to git-daemon, 2006-09-19) we
aren't able to place any extra arguments (separated by NULs) besides
the host otherwise the parsing of those arguments would enter an
infinite loop. This bug was fixed in 73bb33a94 (daemon: Strictly
parse the "extra arg" part of the command, 2009-06-04) but a check
was put in place to disallow extra arguments so that new clients
wouldn't trigger this bug in older servers.
In order to get around this limitation git-daemon was taught to
recognize additional request arguments hidden behind a second
NUL byte. Requests can then be structured like:
"command path/to/repo\0host=..\0\0version=1\0key=value\0".
git-daemon can then parse out the extra arguments and set
'GIT_PROTOCOL' accordingly.
By placing these extra arguments behind a second NUL byte we can
skirt around both the infinite loop bug in 49ba83fb6 (Add
virtualization support to git-daemon, 2006-09-19) as well as the
explicit disallowing of extra arguments introduced in 73bb33a94
(daemon: Strictly parse the "extra arg" part of the command,
2009-06-04) because both of these versions of git-daemon check for a
single NUL byte after the host argument before terminating the
argument parsing.
2. ssh://, file://
Set 'GIT_PROTOCOL' environment variable with the desired protocol
version. With the file:// transport, 'GIT_PROTOCOL' can be set
explicitly in the locally running git-upload-pack or git-receive-pack
processes. With the ssh:// transport and OpenSSH compliant ssh
programs, 'GIT_PROTOCOL' can be sent across ssh by using '-o
SendEnv=GIT_PROTOCOL' and having the server whitelist this
environment variable.
Signed-off-by: Brandon Williams <redacted> Signed-off-by: Junio C Hamano <redacted>
Brandon Williams [Mon, 16 Oct 2017 17:55:27 +0000 (10:55 -0700)]
connect: teach client to recognize v1 server response
Teach a client to recognize that a server understands protocol v1 by
looking at the first pkt-line the server sends in response. This is
done by looking for the response "version 1" send by upload-pack or
receive-pack.
Signed-off-by: Brandon Williams <redacted> Signed-off-by: Junio C Hamano <redacted>
Brandon Williams [Mon, 16 Oct 2017 17:55:26 +0000 (10:55 -0700)]
upload-pack, receive-pack: introduce protocol version 1
Teach upload-pack and receive-pack to understand and respond using
protocol version 1, if requested.
Protocol version 1 is simply the original and current protocol (what I'm
calling version 0) with the addition of a single packet line, which
precedes the ref advertisement, indicating the protocol version being
spoken.
Signed-off-by: Brandon Williams <redacted> Signed-off-by: Junio C Hamano <redacted>
Brandon Williams [Mon, 16 Oct 2017 17:55:25 +0000 (10:55 -0700)]
daemon: recognize hidden request arguments
A normal request to git-daemon is structured as
"command path/to/repo\0host=..\0" and due to a bug introduced in 49ba83fb6 (Add virtualization support to git-daemon, 2006-09-19) we
aren't able to place any extra arguments (separated by NULs) besides the
host otherwise the parsing of those arguments would enter an infinite
loop. This bug was fixed in 73bb33a94 (daemon: Strictly parse the
"extra arg" part of the command, 2009-06-04) but a check was put in
place to disallow extra arguments so that new clients wouldn't trigger
this bug in older servers.
In order to get around this limitation teach git-daemon to recognize
additional request arguments hidden behind a second NUL byte. Requests
can then be structured like:
"command path/to/repo\0host=..\0\0version=1\0key=value\0". git-daemon
can then parse out the extra arguments and set 'GIT_PROTOCOL'
accordingly.
By placing these extra arguments behind a second NUL byte we can skirt
around both the infinite loop bug in 49ba83fb6 (Add virtualization
support to git-daemon, 2006-09-19) as well as the explicit disallowing
of extra arguments introduced in 73bb33a94 (daemon: Strictly parse the
"extra arg" part of the command, 2009-06-04) because both of these
versions of git-daemon check for a single NUL byte after the host
argument before terminating the argument parsing.
Signed-off-by: Brandon Williams <redacted> Signed-off-by: Junio C Hamano <redacted>
Brandon Williams [Mon, 16 Oct 2017 17:55:24 +0000 (10:55 -0700)]
protocol: introduce protocol extension mechanisms
Create protocol.{c,h} and provide functions which future servers and
clients can use to determine which protocol to use or is being used.
Also introduce the 'GIT_PROTOCOL' environment variable which will be
used to communicate a colon separated list of keys with optional values
to a server. Unknown keys and values must be tolerated. This mechanism
is used to communicate which version of the wire protocol a client would
like to use with a server.
Signed-off-by: Brandon Williams <redacted> Signed-off-by: Junio C Hamano <redacted>
Brandon Williams [Mon, 16 Oct 2017 17:55:23 +0000 (10:55 -0700)]
pkt-line: add packet_write function
Add a function which can be used to write the contents of an arbitrary
buffer. This makes it easy to build up data in a buffer before writing
the packet instead of formatting the entire contents of the packet using
'packet_write_fmt()'.
Signed-off-by: Brandon Williams <redacted> Signed-off-by: Junio C Hamano <redacted>
git.99rst.org / git.git / log