* cifsd: release 3.2.5 version
* cifsd: fix unassigned pointer access in smb_fileinfo_rename()
* cifsd: remove unneeded ksmbd_fd_put() in find_next()
* cifsd: always zero-initialize ksmbd_dir_info in smb1pdu
* cifsd: make spnego depend on the "extended security" bit in flags2
* cifsd: add support for weird clients with off-by-one buffer size issues
* cifsd: allow SMB_COM_ECHO without valid user session
* cifsd: fix potential null pointer dereferencing error of tfm in alloc_shash_desc()
* cifsd: fix potential overflow issue in ___server_conf_set()
* cifsd: add xfstests cases in travis-CI
Sebastian Kemper [Wed, 28 Oct 2020 21:23:46 +0000 (22:23 +0100)]
uw-imap: install c-client/linkage.c to staging
linkage.c can be included by other programs as described in
docs/internal.txt (quote: "By using linkage.c instead of explicit
mail_link() calls, you are guaranteed that you will have a consistant
linkage among all software built on this system").
modemmanager: increase initial timeout for event reporting
When the ModemManager daemon is started by the init script, we're
explicitly calling mm_report_events_from_cache() so that all the
hotplug events that happened before that moment are properly notified
to the newly launched daemon.
This initial reporting of events does a wait for the ModemManager
process to be available in DBus, and if the daemon isn't registered in
the bus in a given time, the process is considered failed:
Sun Sep 6 16:20:02 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:02 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:03 2020 [2180]: <info> ModemManager (version 1.14.6) starting in system bus...
Sun Sep 6 16:20:03 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:04 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:05 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:05 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:06 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:06 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:07 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:07 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:08 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:08 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:09 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:09 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:10 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:10 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:11 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:11 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:12 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:12 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:12 2020 ModemManager: hotplug: error: couldn't report initial kernel events: ModemManager not running
Update the default wait time for this initial event notification from
10s to 60s, because there are cases where the daemon is slower to
boot, e.g. during the first boot after a sysupgrade.
Miroslav Lichvar [Fri, 30 Oct 2020 19:57:35 +0000 (20:57 +0100)]
chrony: improve configuration
Extend configuration of NTP sources in UCI:
- Add nts option to enable NTS
- Add disabled option to allow inactive sources
Add nts section to UCI with:
- rtccheck option to disable certificate time checks on systems that
don't have an RTC to avoid the chicken-and-egg problem (it is less
secure, but still should be better than no NTS at all)
- systemcerts option to disable system certificates
- trustedcerts option to specify path to trusted certificates
Save NTS keys and cookies by default to avoid unnecessary NTS-KE
sessions when restarted or switching back to an already used NTS source.
Also, save the drift to stabilize the clock after chronyd restart.
Miroslav Lichvar [Fri, 30 Oct 2020 19:02:48 +0000 (20:02 +0100)]
chrony: improve hotplug script
- Use the chronyc onoffline command to update state of all sources
per current routing configuration
- Don't ignore the "ifupdate" action
- Add NTP servers from DHCP for the interface that went up instead of
the wan4+wan6 interfaces
- Save the servers to files loaded by the sourcedir directive to not
lose them when chronyd is restarted, and remove them when the
interface goes down
Miroslav Lichvar [Fri, 30 Oct 2020 16:02:49 +0000 (17:02 +0100)]
chrony: rework loading of configuration
Instead of loading /etc/chrony/chrony.conf from the file generated from
the chrony UCI configuration, use the confdir directive in the main
config to load the generated file. This should make it obvious that
chrony is configured in UCI and it can also be easily disabled.
Note that I also created a new git repository with these fixes:
https://github.com/matttbe/ifstat/
The original author of these modification is:
Goswin von Brederlow <redacted>
ChangeLog:
* snmp.c: fix 2 pointer targets differ in signedness warnings
* Adding upport for 64bit /proc/net/dev counters.
* Clean up compiler warnings.
More modifications are available in the patch from the Debian project
but mostly related to the "debian" dir, man page and debug mode. Here I
only took the modifications related to the .c and .h files.
The most important fix is related to the support for 64bit counters in
/proc/net/dev instead of displaying 0 after a while.
Aaron Goodman [Sat, 24 Oct 2020 16:53:15 +0000 (12:53 -0400)]
mwan3: fix mwan3 route handling
- support trailing route space from iproute2
- add routes even when iface is down
- fix source_routing argument check
- add quotes in logging to better detect issues with trailing spaces
Alberto Bursi [Mon, 26 Oct 2020 20:37:58 +0000 (21:37 +0100)]
gunicorn: move to webserver category in menuconfig
this is a webserver and not a python library, so it makes
sense to have it in the same category other webservers
also are placed in the menuconfig interface
Mengyang Li [Sun, 25 Oct 2020 04:00:40 +0000 (21:00 -0700)]
openconnect: allow specify --protocol from config
openconnect v8.10 supports 4 VPN protocols
--protocol=anyconnect Compatible with Cisco AnyConnect SSL VPN, as well as ocserv (default)
--protocol=nc Compatible with Juniper Network Connect
--protocol=gp Compatible with Palo Alto Networks (PAN) GlobalProtect SSL VPN
--protocol=pulse Compatible with Pulse Connect Secure SSL VPN
This patch allows user to specify protocol use the new "vpn_protocol"
option and deprecate the old option "juniper" which seems to be missing in
the current openconnect client.
Bjørn Mork [Sun, 25 Oct 2020 18:24:04 +0000 (19:24 +0100)]
conserver: update to version 8.2.6
version 8.2.6 (October 19, 2020):
- try and address license concerns with LICENSE.md
- replace usleep with nanosleep (Rosen Penev <redacted>)
- console: Add 'k' option to exit on console-down (Mylène Josserand <redacted>)
- Fix #48 - apply ipv4 CIDR access list when compiled with ipv6 support
git.99rst.org / openwrt-packages.git / log