James Taylor [Thu, 6 Jun 2019 16:39:57 +0000 (02:39 +1000)]
dnsdist: Move into IP Adresses and Names
Moving the DNSDIST package into the IP Addresses and Names subcategory under Network. This will make it easier to find since it will be with other DNS tools.
Amol Bhave [Thu, 9 May 2019 04:34:22 +0000 (21:34 -0700)]
domoticz: disable searching for boost-cmake
Summary:
This package fails to compile with boost 1.70 when the boost cmake
config gets used.
As far as I can tell, Boost 1.70 introduced
BoostConfigVersion.cmake. In that file, the value of PACKAGE_VERSION is
set to 1.70. This makes CMake auto set the variable Boost_VERSION to
1.70. Historically, Boost_VERSION has been using the format like 170000,
and not 1.70. Some package cmake files still depend on this behavior
and make assertions such as Boost_VERSION > 168000. This is incompatible
with the new scheme.
Test Plan:
`make package/domoticz/compile`
Also compiled all other packages that have a boost dependency, they seem
to be working fine.
tested on nbg6817
Stijn Tintel [Wed, 5 Jun 2019 07:26:58 +0000 (10:26 +0300)]
boost: ignore site config during host build
Without this, the host build picks up the site config in
/usr/share/boost-build/site-config.jam which causes a build failure on
Gentoo where a custom optimization value "none" is used.
Florian Eckert [Wed, 22 May 2019 07:14:38 +0000 (09:14 +0200)]
mwan3: change flush_conntrack handling to use uci list element
With this change it is now possible to combine interface action events.
If an interface action is generated by netifd or mwan3 for example ifup,
ifdown, connectd or disconnected and this action is configured in the inteface
uci section, then the conntrack table is flushed by mwan3.
Jeffery To [Sun, 2 Jun 2019 16:38:53 +0000 (00:38 +0800)]
python,python3: Fix CVE-2019-9740 and CVE-2019-9947
These patches address issues:
CVE-2019-9740: Python urllib CRLF injection vulnerability
CVE-2019-9947: Header Injection in urllib
Links to Python issues:
https://bugs.python.org/issue36276 (resolved duplicated of 30458)
https://bugs.python.org/issue35906 (resolved duplicated of 30458)
https://bugs.python.org/issue30458
Issue 30458 is still currently open, waiting for a decision for
Python 3.5; these patches for Python 2.7 and 3.7 have been merged.
Hannu Nyman [Sun, 2 Jun 2019 09:29:17 +0000 (12:29 +0300)]
irqbalance: add support for uci config
Add support for uci config file.
Only a global 'enabled" switch has been implemented so far.
* Default config disables irqbalance initially, so that there is
no change with the previous behaviour (and the possibly existing
separate launch scripts in people's builds).
Config file and init script can be later extended for irqbalance
options like the oneshot mode or the evaluation interval
Jeffery To [Fri, 31 May 2019 19:52:23 +0000 (03:52 +0800)]
python,python3: Record PKG_RELEASE for host setuptools/pip
This changes the "patched" indicator files for host setuptools and pip
to include their PKG_RELEASE values. This also removes host setuptools
and/or pip before host install, if the installed copy does not match the
version (and PKG_RELEASE) of the copy to be installed.
This will allow added or removed patches to affect host setuptools /
pip, since these changes will cause PKG_RELEASE to be incremented.
This also fixes the host install error, when the install tries to patch
an already patched copy of setuptools. (This error occurs because the
existing indicator files do not have version numbers in their file
names, whereas host install expected version numbers to be present.)
Current version in OpenWrt (3.16.2) fails against the Arch Linux
in System Rescue CD's NBD as rootfs (to allow sharing ISO across
network). Based on resolved issues and web searching it seems
nbd had endianness issues (which affected my ath79 device).
This updates to 3.19 which allows System Rescue CD PXE boot with
NBD rootfs to work.
Removed patches no longer required due to upstream changes, and
added new configure option (--without-libnl) required to avoid
linking against full libnl and libnl-genl (if present in build).
Jeffery To [Wed, 29 May 2019 14:42:02 +0000 (22:42 +0800)]
python3-setuptools,python3-pip: Use more predictable pycache cleanup
This uses two find commands to delete __pycache__ contents then the
__pycache__ directories, rather than a for loop.
The second command omits a -empty test, so that if the first command
doesn't remove all directory contents for some reason, the second
command will return an error (find will not delete a non-empty
directory).
Jeffery To [Wed, 29 May 2019 14:38:30 +0000 (22:38 +0800)]
python-setuptools,python-pip: Change prefix to /usr
This changes the --prefix option, passed to host pip when "installing"
target setuptools and pip, to /usr, in case the prefix is recorded in
the packages.
Jeffery To [Wed, 29 May 2019 14:03:18 +0000 (22:03 +0800)]
python,python3: Disable user site-packages for host Python
Normally, Python will include the user's site-packages directory
(~/.local/lib/python$(PYTHON_VERSION)/site-packages) in it's internal
search path for modules.
This disables this default inclusion for host Python.
This change is applied during Host/Configure instead of as a patch to
keep this setting unchanged for target Python.
* Add --cache-dir option to set the pip cache to a directory in
$(DL_DIR), instead of pip's default (build user's ~/.cache/pip),
fixes #9066
* Add --disable-pip-version-check option, since the version check only
prints a message saying a new version is available
* Combine host_python_pip_install and host_python_pip_install_host into
Build/Compile/HostPy[3]PipInstall
* Remove --root and --prefix options, since this function is only used
to install packages to host Python's default site-packages directory
(setting these may serve to confuse pip)
* Pass all of $(HOST_PYTHON[3]_PACKAGE_BUILD_DEPENDS) to the function,
since pip can handle multiple arguments/packages
Commit 32aaaaa led to failures when openwrt ARCH did not match kernel
ARCH, and this may not be its only side-effect.
This restores the previous Build/Compile and Build/Install, using the
default ones only when using external toolchain; in this case, ARCH is
set to LINUX_KARCH.
git.99rst.org / openwrt-packages.git / log