Changes since oldpackages:
- updated to 1.0.25
* most of openwrt patches are upstreamed now
- cups dependency was completely removed
- small musl patch
- small uclibc patch
- removed link to extra libraries in libsane (used only
for preload backends)
- sane-libs and sane-backends merged and exploded into
individual packages for each backend:
* libsane for sane library (which backends should dep on)
* sane-daemon for saned daemon
* sane-xxx for sane backend for xxx
** each backend has its own custom dep libraries
* sane-backends-all (with no files) that deps on all backends
* sane-qcam is only available for x86/x86_64
** other archs does not implement inb/outb (at least in musl)
Now it is possible to use SANE with much less FS space (KB
instead of MB).
Signed-off-by: Luiz Angelo Daros de Luca <redacted>
dfu-programmer is a Device Firmware Update based USB programmer for
Atmel chips with a USB bootloader. It's comparable to avrdude, but
optimized for Atmel chips with integrated USB DFU Bootloader.
Marty R [Sun, 4 Oct 2015 01:00:00 +0000 (18:00 -0700)]
nut: add dev headers, nut-web-cgi and nut-avahi-service, bugfix
Headers are required by collectd as mentioned in #1801. This is the nut portion based on dwmw2@d636841cd1d1dfab04cb509520c082738ddfb2ea
Happy to merge with 15.05 as per #1803. Signed-off-by: David Woodhouse <redacted>
[martin.p.rowe@gmail.com: condensed InstallDev lines]
Added package nut-web-cgi based on demorfi@7e340f47944ff4a9c49d3b1dc6c1d9d965cd344c. Closes #1614.
Pending signoff by @demorfi
[martin.p.rowe@gmail.com: simplified implementation, no changes to Config.in]
Added package nut-avahi-service similar to other implementations in #618
Bugfix to remove redundant NUT_DRIVER_SERIAL config
Bugfix to make UPSLOG config actually install (requires PKG_RELEASE bump)
Some code tidy-ups Signed-off-by: Martin Rowe <redacted>
Vladimir Ulrich [Fri, 2 Oct 2015 22:56:31 +0000 (01:56 +0300)]
[utils/zoneinfo] Updated to the latest release.
The 2015g release of the tz code and data is available. It reflects the
following changes, which were either circulated on the tz mailing list
or are relatively minor technical or administrative changes:
Changes affecting future time stamps
Turkey's 2015 fall-back transition is scheduled for Nov. 8, not
Oct. 25.
(Thanks to Fatih.)
Norfolk moves from +1130 to +1100 on 2015-10-04 at 02:00 local time.
(Thanks to Alexander Krivenyshev.)
Fiji's 2016 fall-back transition is scheduled for January 17, not 24.
(Thanks to Ken Rylander.)
Fort Nelson, British Columbia will not fall back on 2015-11-01. It has
effectively been on MST (-0700) since it advanced its clocks on
2015-03-08.
New zone America/Fort_Nelson. (Thanks to Matt Johnson.)
Changes affecting past time stamps
Norfolk observed DST from 1974-10-27 02:00 to 1975-03-02 02:00.
Changes affecting code
localtime no longer mishandles America/Anchorage after 2037.
(Thanks to Bradley White for reporting the bug.)
On hosts with signed 32-bit time_t, localtime no longer mishandles
Pacific/Fiji after 2038-01-16 14:00 UTC.
The localtime module allows the variables 'timezone', 'daylight',
and 'altzone' to be in common storage shared with other modules,
and declares them in case the system <time.h> does not.
(Problems reported by Kees Dekker.)
On platforms with tm_zone, strftime.c now assumes it is not NULL.
This simplifies the code and is consistent with zdump.c.
(Problem reported by Christos Zoulas.)
Changes affecting documentation
The tzfile man page now documents that transition times denote the
starts (not the ends) of the corresponding time periods.
(Ambiguity reported by Bill Seymour.)
The previous version was an unreleased one from the OVS trunk.
This one is the released version, described here:
http://openvswitch.org/pipermail/announce/2015-August/000078.html
Yousong Zhou [Fri, 2 Oct 2015 00:16:41 +0000 (08:16 +0800)]
xl2tpd: bump version
The update is mainly for addressing some memory corruption and segementation
faults issues observed when running xl2tpd in OpenWrt. The relevant upstream
pull request was at link [1]
u²pnpd announces a device as UPnP basic device on the
network so that an user could easily find it. It tries
to detect various system information automatically, however
everything can be overridden by UCI settings.
- update to latest (2.4.1) version
- add support for config files
- switch uci to config files
- based on https://github.com/openwrt/packages/pull/1815
- merge maintainers
- add openssl/polarssl build variants
Signed-off-by: Mike Brady <redacted> Signed-off-by: Álvaro Fernández Rojas <redacted>
perlbase-essential and perlbase-config depend on functionality from
each other. Previously, this was solved by just making perlbase-config depend
on perlbase-essential.
However, since a simple "use lib" is enough to trigger pulling in Config, this
approach doesn't seem to make much sense. So let's just make perlbase-essential
depend on perlbase-config instead.
This pulls in perlbase-config as a dependency to pretty much every Perl package,
so in the future we might want to just merge Config into perlbase-essential.
Michael Heimpold [Mon, 21 Sep 2015 19:52:04 +0000 (21:52 +0200)]
open-plc-utils: upgrade to latest git revision and fix compilation
Buildbots are reporting the following error:
../mme/ARPCPrint.c: In function 'ARPCPrint':
../mme/ARPCPrint.c:123:2: error: incompatible type for argument 3 of 'vfprintf'
vfprintf (fp, (char *)(&data->LIST [LE16TOH (data->STROFFSET)]), (void *)(&data->LIST [LE16TOH (data->ARGOFFSET)]));
^
In file included from /store/buildbot/slave/mxs/build/staging_dir/toolchain-arm_arm926ej-s_gcc-4.8-linaro_musl-1.1.11_eabi/include/fortify/stdio.h:20:0,
from ../mme/ARPCPrint.c:68:
/store/buildbot/slave/mxs/build/staging_dir/toolchain-arm_arm926ej-s_gcc-4.8-linaro_musl-1.1.11_eabi/include/stdio.h:108:5: note: expected '__isoc_va_list' but argument is of type 'void *'
Fix this by definition __UCLIBC__ to enable a workaround for this
issue.
While at, switch to HTTPS URL for cloning the git repo.
git.99rst.org / openwrt-packages.git / log