George Sapkin [Wed, 4 Mar 2026 15:11:53 +0000 (17:11 +0200)]
adguardhome: add GC and thread control variables
Add Go GC and threading control variables - GOGC, GOMEMLIMIT, and
GOMAXPROCS - to allow more granular control of the memory management on
lower memory devices.
Florian Eckert [Wed, 4 Mar 2026 10:08:46 +0000 (11:08 +0100)]
openvpn: refactoring INSTALL_DIR command call during install
Move the 'INSTALL_DIR' creation in the make install target to the location
where the files are also installed. This prevents directories that are no
longer needed from being forgotten during refactoring.
zabbix: add full variants and add-on support for other
Rather than having a database selection for SQLITE which prevents
the server or frontend from building, we add a 'basic'
variant for the proxy which uses sqlite3, and have the database
Kconfig affect only the server and frontend.
* There are now only three variants:
1. full, which is the default. It includes the full monitoring feature
set currently available on openwrt, including netsnmp, curl-based
checks, and ldap. In addition these features, plus the choice of
database and ssl provider (or no ssl) are configuration options for
this variant.
2. basic, which provides basic functions with openssl support
3. no-configure, for packages which are not part of the main Zabbix
compile process (including the WebUI which only requires copying
files for use by a web server with PHP CGI support).
* Full is the default variant for agentd and proxy, which are the only
packages with a choice between full and basic. All other packages only
are part of one variant.
* Full variants are the base version of the packages (that is
zabbix-agentd is the 'full' version while zabbix-agentd-basic is the
core version). The proxy version is named zabbix-proxy-basic-sqlite to
announce that it is using the sqlite3 database and not a database
server.
* get and sender only build if at least one of agentd, server, or proxy
are built. Therefore prevent selection get or sender when they would not
build.
* Zabbix's use of NetSNMP requires that Zabbix be build with OpenSSL
* While we are here, enable support for dates after 2038 (64-bit time_t)
* https://github.com/openwrt/packages/pull/28585#issuecomment-3984978895
* we updated the name to reflect that it is for basic functionality
that can standalone, rather then being a core the other packages
build on.
* basic has been used rather than tiny or small since the sentence
'Provides only tiny/small functionality with SSL/TLS' in the
description, sounds strange, but using basic this reads properly.
Chester A. Unal [Mon, 2 Mar 2026 10:35:25 +0000 (12:35 +0200)]
bsbf-openwrt-resources: add
Designate bsbf-openwrt-resources as the package to contain the BSBF
packages without a remote source to fetch.
Move bsbf-bonding and bsbf-usb-netdev-autodhcp into bsbf-openwrt-resources.
Change bsbf-usb-netdev-autodhcp to bsbf-autoconf-dhcp along with the logic.
Stan Grishin [Mon, 2 Mar 2026 20:21:48 +0000 (20:21 +0000)]
https-dns-proxy: update to 2025.12.29-4
* add explicit LICENSE file to the repository
* pretty up Makefile
* minor shell script styling improvements
* better parsing if individual dnsmasq instances are used in config
* functional test
When a USB UPS is first configured, the permissions on the device under
`/dev/bus/usb` have not yet been set to allow the nut user access. This
resulted in errors such as:
Fri Feb 13 23:39:01 2026 daemon.debug upsd[3504]: [D1] mainloop: UPS
[eco550ups] is not currently connected, trying to reconnect
Fri Feb 13 23:39:01 2026 daemon.debug upsd[3504]: [D1] mainloop: UPS
[eco550ups] is still not connected (FD -1)
Fri Feb 13 23:39:03 2026 daemon.debug upsd[3504]: [D1] mainloop: UPS
[eco550ups] is not currently connected, trying to reconnect
Fri Feb 13 23:39:03 2026 daemon.debug upsd[3504]: [D1] mainloop: UPS
[eco550ups] is still not connected (FD -1)
or
Fri Feb 13 23:38:44 2026 daemon.err usbhid-ups[3083]: No matching HID
UPS found
Fri Feb 13 23:38:49 2026 daemon.warn procd: failed adding instance
cgroup for nut-server: No error information
Fri Feb 13 23:38:49 2026 daemon.err usbhid-ups[3115]: libusb1: Could not
open any HID devices: insufficient permissions on everything
Fri Feb 13 23:38:49 2026 daemon.err usbhid-ups[3115]: No matching HID
UPS found
Fri Feb 13 23:38:54 2026 daemon.warn procd: failed adding instance
cgroup for nut-server: No error information
and upsd would enter a procd crashloop.
We fix that by looking in `sysfs` (under `/sys/devices`) to find the
correct USB device and set its ownership and permissions to allow acces
to the user the driver is running under.
Copilot complained about a few things
* nut-server.init had potential word-splitting issues in various spots.
* it also had some commands missing an argument
* improved documentation was required to clarify a dependency
* an incorrect sed could mangle names as well as remove the intended
name
Additionally, while fixing those issues the author noticed that the case
of multiple UPS devices with the same vendorid:productid were not
correctly handled. A check of the serial number, if provided, was added
along with a fallback to allowing NUT communications with all UPS
devices with a given vendorid:productid, if no serial number was given.
Improve efficiency and decrease McCabe complexity of
ensure_usb_ups_access, while also fixing Copilot complaints.
$@ in case is a problem, and we only handle the first parameter in any
event, so change $@ to "$1"
Copilot caught a missing 2>&1 and we silence some shellcheck
false positives
Attempt to de-mystify the nut-server initscript by adding comments
and factoring out some common code that adds to complexity of the
functions of which it is part.
Updated configuration was not being applied after config change. This
was due to the means used to do the daemon reloads.
Closes #28298 "Drivers not restarted on config change"
Enable creating PID files for the server, driver, and monitor daemon
processes. This allows to use NUT's built-in facilities for signalling
the daemon's.
For server, when reloading:
1. Check if upsd is running
1. If not, start it.
2. If it is send reload signal to upsd
2. For each driver:
1. Check if the driver is running
1. If it is, send reload-or-exit signal to driver
2. If driver is not running, start it
3. Attempt to start server (upsd and drivers) if service was stopped.
For server, when stopping:
1. Check if upsd is running
1. If it is send stop signal to upsd
2. Ensure it really is stopped
2. For each driver:
1. Check if the driver is running
1. If it is, send stop signal to driver
2. If driver is still running, stop it.
3. If the server process is active (even with not upsd or drivers),
stop it.
For monitor, send the reload signal on config change, with fallback to
stopping and starting the daemon.
Change the names of variables and functions to make it more clear what
is being acted on, configured, or otherwise touched.
Avoid confusing messages in syslog
* Avoid attempting to remove a procd server instance that does not exist
as doing so results in confusing/scary messages in syslog, such as:
In NUT some models of UPS use shutdown_delay rather than offdelay, and
yet others use usd for the same purpose. shutdown_delay and usd were
previously not available in the list of available driver options, so
add them.
shellcheck is a useful linter if a bit pedantic and overzealous so
add overrides to silence false positives
Also, fix issues found by the linting.
* misspelling meant initscript could skip updating configuration in
certain circumstances
* minor: assignment of the result of execution as the time of creating
local. This has been separated.
Fix whitespace and comment typos
Fix typo in Config.in option text
* This is cosmetic, but user-facing (for users building via SDK or
buildroot).
As reported in #23410 Network interface reset doesn't work as expected
on a Wireguard VPN interface and in #27927 lt2p interface won't reboot,
and mentioned in #27248, the current implementation of the option to
restart an interface when connectivity check fails for some period does
not result in an interface restart for all interface.
Notably 'virtual' interfaces such as Wireguard and L2TP do not restart.
The solution that works is to use `ifup <interface>` instead of only
changing the link status.
This commit is based on the one in #27248 by @rondoval, who unfortunately
has not updated the commit message as requested for half a year.
Patrick Hemmen [Tue, 10 Feb 2026 20:38:23 +0000 (21:38 +0100)]
ddns-scripts: change servercow.de to new dns api
The previous way to update dns records at servercow.de was replaced
with a https based dns api. The new dns api is documented at
https://wiki.servercow.de/de/domains/dns_api/api-syntax/#einfuhrung
Oliver Sedlbauer [Thu, 19 Feb 2026 10:36:51 +0000 (11:36 +0100)]
acpid: prevent duplicate daemon instances
The hotplug script directly invokes /usr/sbin/acpid. If hotplug fires
before procd starts acpid, it cannot stop the procd-managed instance,
resulting in a second unmanaged acpid process running alongside it.
Fix this issue by letting ONLY procd manage the acpi daemon.
Oliver Sedlbauer [Wed, 28 Jan 2026 15:57:06 +0000 (16:57 +0100)]
gpsd: add wrapper script for hotplug/respawn handling
Gpsd needs some time to create its Unix socket after the process starts.
The hotplug call in service_started() is triggered too early, before the
socket is ready, causing failures in scripts that depend on it.
Additionally, when gpsd crashes and procd respawns it, service_started() is
not called again, so no hotplug event is emitted on respawn. Therefore scripts
listening for gpsd availability miss the STARTED event.
This commit ensures the hotplug call waits for the socket to appear,
so dependent scripts reliably see the STARTED event, even after respawns.
Dirk Brenken [Sun, 1 Mar 2026 05:44:18 +0000 (06:44 +0100)]
adblock: release 4.5.2‑1
* added a new firewall feature: the DNS‑Bridge.
This temporary DNS bridge ensures that an external fallback DNS server
is automatically used during local DNS restarts, providing Zero‑Downtime DNS resolution.
* The debug mode now captures internal error output in a dedicated log file,
located by default in the adblock base directory as /tmp/adb_error.log.
* LuCI: exposed the previously missing adb_cores option (auto‑detected by default).
* LuCI: added support for the new DNS‑Bridge options (Zero‑Downtime during DNS restarts).
Stan Grishin [Wed, 25 Feb 2026 02:31:00 +0000 (02:31 +0000)]
pbr: update to 1.2.2-r6
Update pbr from 1.2.1-r87 to 1.2.2-r6. This release
adds mwan4 (Multi-WAN) integration, a diagnostic
`support` command, IPv6 lease-to-nftset handling,
improved split-uplink detection, stricter UCI
validation, shell variable quoting fixes across 30+
locations, and a comprehensive 126-case test suite
with a full mock OpenWrt sysroot.
- Version bumped from `1.2.1-r87` to `1.2.2-r6`
- URL updated from `github.com/stangri/pbr/` to
`github.com/mossdef-org/pbr/`
- No dependency changes
---
Three options changed from scalar to list type:
| Option | Old Type | New Type |
|---------------------|----------|----------|
| `ignored_interface` | `option` | `list` |
| `lan_device` | `option` | `list` |
| `resolver_instance` | `option` | `list` |
Options reordered: scalars first, then lists,
matching UCI convention. No values changed.
---
The init script (`/etc/init.d/pbr`) received
significant additions and fixes across ~660 lines
(+443/-218).
Bumped from `24` to `25`.
**mwan4 (Multi-WAN) Integration (8 new functions):**
- `mwan4_is_installed()` — Detect mwan4 package
- `mwan4_is_running()` — Check service status
- `mwan4_get_iface_list()` — Get enabled interfaces
- `mwan4_get_strategy_list()` — Get strategies
- `mwan4_get_iface_mark_chain()` — Get nft mark
chain for interface
- `mwan4_get_iface_nft_sets()` — Get nftset names
- `mwan4_get_strategy_chain()` — Get strategy chain
- `mwan4_get_mmx_mask()` — Get Multi-WAN mark mask
Enables PBR to coordinate with mwan4 for combined
policy routing and multi-WAN failover.
**Diagnostic `support` Command:**
- New `support()` function generates masked
diagnostic output for troubleshooting
- `print_config_masked()` redacts sensitive data
(passwords, keys, tokens, PSKs, endpoints)
while preserving IP addresses and structure
**IPv6 Lease Handling:**
- New `ipv6_leases_to_nftset()` parses DHCPv6
leases from `/tmp/hosts/odhcpd`
- Complements existing `ipv4_leases_to_nftset()`
**Split Uplink Detection (3 new functions):**
- `is_uplink4()` — Check IPv4 uplink interface
- `is_uplink6()` — Check IPv6 uplink interface
- `is_uplink()` — Unified check (v4 or v6)
- New `ipv6_default_lookup` variable for split
IPv4/IPv6 uplink routing table assignment
**ubus Integration:**
- New `ubus_get_interface()` queries PBR gateway
data via ubus
**Shell Variable Quoting (30+ locations):**
Systematic conversion of bare variable references
to brace-quoted syntax throughout the script:
- `$2` to `${2}` in string replacements
- `$_ret` to `${_ret}` in conditional expansions
- `$_mark` to `${_mark}` in nft rule generation
- `$nftset6` to `${nftset6}` in dnsmasq rules
- `$nft_set_timeout` to `${nft_set_timeout}`
- `$xrayIfacePrefix` to `${xrayIfacePrefix}`
- And many more across rule generation, output
strings, and conditional expressions
**Specific Fixes:**
- `pbr_get_gateway6()`: Changed `is_wan` to
`is_uplink4` for correct IPv4 uplink detection
- `is_netifd_interface()`: Now checks both
`ip4table` and `ip6table` (was IPv4 only)
- `load_environment()`: Fixed inverted flag check
(`-z` changed to `-n` for `loadEnvironmentFlag`)
- Dnsmasq instance detection: Fixed UCI section
lookup with proper variable handling
- Help text URL: `#WarningMessagesDetails` changed
to `#warning-messages-details` (kebab-case)
- `uplink_ip_rules_priority`: Changed from
`uinteger` to `range(99,32765)` to enforce
valid Linux routing policy DB bounds
Three options now use `config_get_list` instead of
`config_get` to support multiple values:
- `ignored_interface`
- `lan_device`
- `resolver_instance`
**Rule Cleanup Refactored:**
- Replaced complex awk-based rule parsing with
priority-range approach
- Calculates `prio_min = priority - max_ifaces`
and `prio_max = priority`, iterates and deletes
rules within range
- Skips netifd-managed fwmark rules
- Added legacy rule cleanup for
`suppress_prefixlength` entries
**Firewall Sync:**
- Added `fw4 -q reload` after successful nft file
installation to ensure fw4 state synchronizes
with PBR's nftables changes
**Resolver Instance Handling:**
- Added robustness checks in
`_dnsmasq_instance_config()`: file existence
check and instance validity check
- Better section name resolution with UCI query
- Added missing `setup` parameter in resolver
instance setup calls
- `uci_get_device()` — Replaced with inline call
- `uci_get_protocol()` — Replaced with inline call
In `pbr.user.netflix`, fixed two instances of
bare variable expansion in parameter substitution:
```sh
params="${params:+$params, }${p}"
params="${params:+${params}, }${p}"
```
---
A full test suite is added in `net/pbr/tests/`
(21 new files, ~1,300 lines) using the shunit2
framework with a complete mock OpenWrt sysroot.
**Runner (`run_tests.sh`):**
- Discovers test files via glob pattern
- Supports pattern-based filtering via CLI arg
- Executes each test in isolated bash subprocess
- Captures output, reports pass/fail with color
- Accumulates stats and lists failures at end
- Requires `shunit2` package
**Setup (`lib/setup.sh`):**
- Creates temporary mock sysroot (`$MOCK_ROOT`)
- Sets `IPKG_INSTROOT` for OpenWrt path resolution
- Installs mock libraries, configs, and binaries
- Stubs `rc.common`, procd, logger, resolveip,
jsonfilter, pidof, sync
- Sources pbr init script with `readonly` keyword
stripped (allows test overrides)
- Redirects all file paths to temp directories
**UCI Config API (`lib/mocks/functions.sh`):**
- Full `config_load` parser for UCI syntax
- `config_get`, `config_get_bool`,
`config_get_list`, `config_foreach`,
`config_list_foreach`
- `uci_set`, `uci_get`, `uci_add_list`,
`uci_remove`, `uci_remove_list`, `uci_commit`
- Stores state in associative arrays
**Network API (`lib/mocks/network.sh`):**
- `network_get_device`, `network_get_physdev`,
`network_get_gateway`, `network_get_gateway6`,
`network_get_protocol`, `network_get_ipaddr`,
`network_get_ip6addr`, `network_get_dnsserver`,
`network_flush_cache`
- Backed by `MOCK_NET_*` variables that tests
override to simulate different network states
- Pre-configured: wan (eth0/dhcp/192.168.1.1),
wan6 (eth0/dhcpv6/fd00::1), wg0 (wireguard),
lan (br-lan/static), loopback (lo/static)
`02_nft_check_element` (6 cases):
- fw4 table existence
- Chain existence (input, forward, output,
dstnat, mangle_*)
- Non-existent chain detection
**06_network — Network Functions (11 cases):**
`01_gateway_discovery` (4 cases):
- IPv4 gateway from mock (192.168.1.1)
- IPv4 gateway fallback (ip addr parsing)
- IPv6 gateway from mock (fd00::1)
- Interface finding for uplinks
`02_supported_interfaces` (7 cases):
- Ignored: loopback in ignored list
- LAN detection vs non-LAN
- Uplink support (wan is supported)
- LAN/loopback not supported
- Wireguard supported (wg0)
- Explicit custom interface support
Stan Grishin [Tue, 24 Feb 2026 20:56:38 +0000 (20:56 +0000)]
adblock-fast: update to 1.2.2-r6
Update adblock-fast from 1.2.1-r7 to 1.2.2-r6. This is a major
architectural rewrite that ports the core business logic from a ~2,700-line
monolithic shell script (`/etc/init.d/adblock-fast`) to a ~2,850-line ucode
module (`/lib/adblock-fast/adblock-fast.uc`), reducing the init script to a
thin ~130-line procd wrapper. The rewrite also introduces a comprehensive
test suite and adds the AGPL-3.0-or-later LICENSE file.
The previous implementation embedded all business logic (download pipeline,
domain processing, resolver configuration, status reporting, caching)
inside the init.d script as a ~2,700-line POSIX shell script. This made the
code difficult to test, maintain, and extend. Shell limitations (no native
data structures, reliance on subshell `eval`, global namespace pollution)
also introduced fragility and performance overhead from repeated subprocess
spawning for UCI/ubus operations.
The init script now delegates all operations to the ucode module via:
```sh
readonly _ucode="ucode -S -L /lib/${packageName} /lib/${packageName}/cli.uc --"
```
The CLI dispatcher (`cli.uc`) maps init script actions (start, stop,
status, allow, check, pause, etc.) to the module's exported functions.
The init script retains only procd lifecycle glue (`start_service`,
`stop_service`, `service_triggers`, `service_data`) and UCI validation
schemas.
1. **Native UCI/ubus bindings** — Direct `cursor()` and `connect()` calls
replace subprocess-heavy `uci get/set` and `jsonfilter` pipelines
2. **Proper data structures** — Objects and arrays for config, status
tracking, DNS mode definitions; no more string-concatenation state
management
3. **Streaming I/O** — 64KB chunked file reads for blocklist processing
instead of loading entire files into memory via pipes
4. **Memoized environment detection** — Platform capabilities (installed
resolvers, ipset/nftset support, downloader detection) cached on first
call
5. **Centralized trigger logic** — Config diff comparison
(`adb_config_cache()`) determines download/restart/skip in one place
6. **Testable** — Module exports enable direct unit testing without mocking
an entire init system
- `+jshn` — No longer needed (was used for JSON parsing in shell)
- URL updated from `github.com/stangri/adblock-fast/` to
`github.com/mossdef-org/adblock-fast/`
- Install target now installs `/lib/adblock-fast/adblock-fast.uc` and
`/lib/adblock-fast/cli.uc` alongside the init script
- Version stamp now patches the ucode module
(`version:` field) instead of init script (`PKG_VERSION` variable)
- `postinst` script removed (service enable handled elsewhere)
- `prerm` script simplified: only purges cache, no longer
stops service or removes rc.d symlinks (handled by procd)
---
The module supports all existing DNS resolver integrations through a
unified `dns_modes{}` configuration map. Each mode defines output file
paths, gzip cache names, sed format/parse filters, and grep patterns:
```
For each file_url UCI section:
→ Download URL (curl with retries, timeout, optional max-file-size)
→ Auto-detect format → Apply format-specific sed filter → Extract domains
→ Append to accumulator (blocked or allowed)
Merge phase:
→ sort -u (deduplicate)
→ Subdomain optimization (awk label-reverse → sort → dedup → reverse)
→ Remove allowed domains (sed -f generated_script)
→ Inject canary domains (iCloud Private Relay, Mozilla DoH)
→ Inject manually blocked_domain entries from config
→ Format for target DNS resolver
→ Optional validity check (remove malformed entries)
→ Atomic rename to output file
Resolver phase:
→ Update resolver config (UCI: addnhosts, conf-dir, server files)
→ Sanity check (dnsmasq --test)
→ Restart resolver service
→ Heartbeat probe (resolve canary domain to verify blocking)
→ Revert on failure
```
| Function | Purpose |
|-----------------------|------------------------------------------------------|
| `start(args)` | Main lifecycle: download, restore from cache, or restart |
| `stop()` | Disable blocking, flush kernel state, cleanup |
| `status_service()` | Report status to syslog/ubus |
| `allow(domain)` | Whitelist domain in live blocklist + UCI config |
| `check(pattern)` | Search current blocklist for domain |
| `check_tld()` | Detect TLD entries (sanity check) |
| `check_leading_dot()` | Detect leading-dot errors |
| `check_lists(domain)` | Search upstream list URLs for domain |
| `dl()` | Force re-download all lists |
| `killcache()` | Purge all cached files |
| `pause(seconds)` | Temporarily disable blocking |
| `show_blocklist()` | Output parsed blocklist to stdout |
| `sizes()` | Fetch/display configured blocklist file sizes |
| `get_init_status()` | Full service state for UI/RPC clients |
| `get_init_list()` | Enabled/disabled status |
| `get_platform_support()` | Detect installed resolvers and features |
| `get_file_url_filesizes()` | Return cached/live URL metadata |
- 40+ localized message codes (e.g., `errorDownloadingList`,
`errorConfigValidationFail`, `warningSanityCheckTLD`)
- Errors/warnings accumulated in `status_data{}` arrays
- Synced atomically to ubus service data for UI consumption
- Status states: `statusSuccess`, `statusFail`, `statusDownloading`,
`statusProcessing`, `statusRestarting`, `statusPaused`
---
The init script (`/etc/init.d/adblock-fast`) is reduced from ~2,700 to ~130
lines. It now serves exclusively as a procd service wrapper:
- **procd lifecycle**: `start_service()` calls ucode `start`, captures
shell output for `service_data()`; `stop_service()` calls ucode `stop`
- **Service triggers**: WAN interface triggers, config change triggers, UCI
validation (unchanged from previous version)
- **Extra commands**: `allow`, `check`, `check_tld`, `check_leading_dot`,
`check_lists`, `dl`, `killcache`, `pause`, `show_blocklist`, `sizes`,
`version` — all delegate directly to ucode CLI dispatcher
- **procd data bridge**: `emit_procd_shell()` in ucode generates shell
statements that the init script `eval`s for `service_data()` and
`service_stopped()`/`service_started()` hooks (firewall restart flag)
---
The `90-adblock-fast` uci-defaults script is simplified from 181 to 65
lines:
- **Removed**: Entire `simple-adblock` migration path (config, cache files,
URL lists). This migration was for the initial transition from
simple-adblock to adblock-fast and is no longer needed.
- **Retained**: List name migration (adds `name` option to `file_url`
sections that lack one, using pristine default config as reference),
config key renames (`debug` → `debug_init_script`, `proc_debug` →
`debug_performance`, `sanity_check` → `dnsmasq_sanity_check`)
- **Simplified**: Uses direct `uci` commands instead of sourcing the init
script for `uci_get`/`uci_set` helpers. Pristine config lookup now
supports both apk (`.apk-new`) and opkg (`-opkg`) package manager
conventions.
---
A full test suite is added in `net/adblock-fast/tests/` (16 new files,
~1,800 lines) mock-and-expect pattern.
- **Module patching**: Converts ES6 imports to CommonJS requires, redirects
hardcoded system paths to temp directories for isolation
- **Resolver stubs**: Mock binaries for dnsmasq (v2.89), smartdns, unbound,
ipset, nft, resolveip
- **Test case format**: Markup-based (`-- Testcase --`,
`-- Environment --`, `-- Expect stdout --`, `-- File path --`) with
support for inline test data and per-test environment overrides
- **Assertion model**: Compares stdout, stderr, and exit code against
expected values using `diff -u`
- **Shell validation**: Syntax-checks init.d and uci-defaults scripts via
`sh -n`
- **Automatic cleanup**: Trap-based temp directory removal
5 curated test data files with ~160+ unique test domains across multiple
formats (plain domains, hosts, AdBlock Plus, dnsmasq), including:
- Valid tracking/ad domains for positive matching
- Overlapping domains across files for deduplication testing
- Parent/child domain pairs for subdomain optimization testing
- Invalid entries (IPs, malformed, special chars) for filter robustness
- Mock UCI/ubus fixtures simulating a standard OpenWrt environment
(512MB RAM, WAN interface up, dnsmasq running)
---
Adds the full AGPL-3.0-or-later license text (661 lines), matching the
`PKG_LICENSE` field already declared in the Makefile.
---
- Package compat bumped from `11` to `13` (in the ucode module's
`pkg.compat` constant), reflecting the architectural change
- All existing UCI configuration options preserved (same validation schema)
- All existing extra_commands preserved (same CLI interface)
- All existing DNS resolver modes preserved (same output formats)
- procd service triggers and config triggers unchanged
- `simple-adblock` migration path removed from uci-defaults (obsolete)
---
```sh
cd net/adblock-fast/tests && sh run_tests.sh
```
Paul Donald [Wed, 11 Feb 2026 16:51:21 +0000 (17:51 +0100)]
openvpn: drop unused eurephia
This plugin has not seen updates to keep it synchronised
with recent openvpn, nor any updates in the last several
years. It relies on the SHA1 algo which is deprecated,
and iptables. ovpn has its own management interface.
Signed-off-by: Paul Donald <redacted>
https://github.com/openwrt/packages/pull/28533
Paul Donald [Mon, 16 Feb 2026 19:01:50 +0000 (20:01 +0100)]
openvpn: introduce proto handler
openvpn needs a proto handler. Here it is.
Removed all of the up/down scripts from the init handler
and made those entirely optional (with some ucode examples).
The config options have been updated to reflect v 2.6/2.7,
with a 'd' flag to denote deprecated. Deprecated flags are
gated behind an 'allow_deprecated' config flag, which must
be on to use them. Some flags will cease to work in the next
version.
Users should not be using compression. Openvpn has enough
security holes and pitfalls already without using
compression.
Updated the example configs (left in place as legacy
documentation) and removed older cryptos which do not exist
in ovpn any longer.
A migration script is included -x. /etc/config/openvpn
entries become interface entries in /etc/config/network
with proto='openvpn'. The source config is retained.
Signed-off-by: Paul Donald <redacted>
https://github.com/openwrt/packages/pull/28533
Hauke Mehrtens [Sat, 21 Feb 2026 18:46:11 +0000 (19:46 +0100)]
libutp: deactivate -Werror
With fortify sources libutp fails to compile because the fortify sources
for musl use the GNU extension include_next. Do not fail when the
compiler issues a warning.
Fixes the following compile error:
```
In file included from libutp-2023.02.14~c95738b1/utp_utils.cpp:23:
/include/fortify/stdlib.h:22:2: error: #include_next is a GCC extension [-Werror]
22 | #include_next <stdlib.h>
| ^~~~~~~~~~~~
```
John Audia [Fri, 6 Feb 2026 21:41:44 +0000 (16:41 -0500)]
lxc-auto: add optional dnsmasq dep wait on startup
Add opt-in support for waiting for dnsmasq to be fully initialized
before starting LXC containers. This addresses issues where containers
that depend on DNS resolution (e.g., AdGuardHome) start before dnsmasq
has loaded its DHCP lease table, resulting in hostnames not being
resolved to IP addresses.
The feature is controlled by two new optional UCI config options in
/etc/config/lxc-auto whose usage is commented therein.
XCas13 [Sun, 8 Feb 2026 07:26:05 +0000 (11:26 +0400)]
btop: patch to move the log file to tmpfs
The log file path is hardcoded as $HOME/.local/state/btop.log, i.e. to the router’s flash storage rather than to tmpfs. This patch sets the log file path to /tmp/log/btop.log
Daniel Golle [Wed, 11 Feb 2026 00:49:34 +0000 (00:49 +0000)]
mptcpd: update to 0.14
- libmptcpd breaking changes: new deny_join_id0 parameter in connection interfaces
- subflow_closed interface has new error parameter
- add support for new 'laminar' in-kernel PM endpoint
- mptcpize now appends LD_PRELOAD instead of overriding
- mptcpize sets GODEBUG=multipathtcp=1 for Go applications
- add musl libc compatibility
-> allows removal of most downstream patches
- support ELL 0.72 API changes
- security: added recommendation against world-writeable plugin directories
Miroslav Lichvar [Tue, 10 Feb 2026 19:21:34 +0000 (20:21 +0100)]
borgbackup: update to 1.4.3
This update fixes incompatibility with python-msgpack 1.1.2.
Add missing dependency on python3-openssl and drop the optional
dependency on python-pyfuse3, which doesn't work with the current
version.
Dirk Brenken [Wed, 18 Feb 2026 20:18:23 +0000 (21:18 +0100)]
travelmate: release 2.4.0-1
* rework wlan scanning
- drop iw/ip - use ubus/iwinfo calls instead
- build a new, central wlan scan function (used in LuCI and during
* simplify uci config parsing
Hannu Nyman [Wed, 18 Feb 2026 18:03:45 +0000 (20:03 +0200)]
modbus: update to 3.1.12
Update modbus to version 3.1.12
https://github.com/stephane/libmodbus/releases/tag/v3.1.12
Fix FD_SET overflow when socket fd >= FD_SETSIZE.
Check dest pointer not null and nb in read functions.
NULL check for src and nb < 1 validation in write functions.
modbus_reply: don't compute address for FC 0x07/0x11.
Use O_NONBLOCK instead of deprecated O_NDELAY.
Explicit cast for Coverity CID 416366.
Document required buffer size of modbus_receive.
Document macros for error codes corresponding to Modbus exceptions.
Fix example of modbus_rtu_set_serial_mode.
Test filesystem provides symlink in autogen.sh.
Sync API signatures with the documentation.
Many documentation fixes and typo corrections.
Add coverage target and helper script.
bdk38 [Mon, 16 Feb 2026 12:49:45 +0000 (04:49 -0800)]
ddns-scripts: add API-based registered IP verification for Cloudflare proxied
records
Problem:
When using Cloudflare with proxy enabled (orange cloud), DNS lookups
return Cloudflare's edge IP instead of the actual origin IP registered
in the dashboard. This causes ddns-scripts to incorrectly detect IP
mismatches, triggering unnecessary updates and potential rate limiting.
Solution:
Add an optional 'use_api_check' configuration option that enables
provider scripts to fetch the registered IP directly via their API,
bypassing DNS lookups.
Changes:
- dynamic_dns_functions.sh: Add API check block to get_registered_ip()
(~25 lines). When use_api_check is enabled, sources the provider
script with GET_REGISTERED_IP=1 flag. Falls back to DNS lookup if
API check is disabled, unsupported, or fails.
- update_cloudflare_com_v4.sh: Add handler for GET_REGISTERED_IP mode
(~15 lines). Reuses existing cURL setup and authentication to query
Cloudflare API for actual record content.
- etc/config/ddns: Document use_api_check option
Behavior:
- use_api_check=0 or unset: DNS lookup (existing behavior, no changes)
- use_api_check=1 with API support: API query for registered IP
- use_api_check=1 without API support: Falls back to DNS lookup
- API failure: Gracefully falls back to DNS lookup
Testing:
- Cloudflare (proxied): Correctly retrieves origin IP via API
- Cloudflare (non-proxied): Works correctly
- No-IP: DNS lookup works (no regression)
- IPv4 and IPv6 records tested
- API failure gracefully falls back to DNS
Signed-off-by: Wayne King 244781262+bdk38@users.noreply.github.com
git.99rst.org / openwrt-packages.git / log