Andy Walsh [Fri, 1 Mar 2019 11:16:05 +0000 (12:16 +0100)]
softethervpn5: switch to git (2019-02-27)
* switch to git, until we can consume manual created source releases again
* Fix compilation without OpenSSL ENGINE
* remove unnecessary stop_service() triggers
Andy Walsh [Fri, 1 Mar 2019 10:19:25 +0000 (11:19 +0100)]
samba4: tmsize patch, build with netbios by default
* add patch for tmsize overflow (https://bugzilla.samba.org/show_bug.cgi?id=13622)
* re-enable netbios by default
(Some users still need netbios and its just a minor size increase 50kb)
Daniel Golle [Thu, 28 Feb 2019 18:51:46 +0000 (19:51 +0100)]
gnunet: GNUnet v0.11 release
Switch to v0.11 release sources (plus patches to still get it to build)
gnunet-social was out-sourced into a separate repository and hence
new OpenWrt package gnunet-secushare.
Florian Eckert [Mon, 18 Feb 2019 12:14:10 +0000 (13:14 +0100)]
mwan3: fix disconnected event generation in mwan3track
Before this change two disconnected events were generated. This is wrong!
The disconnected event is impliciet generated by the hotplug script on ifdown
event. The mwan3track script is notified by a USR1 signal which
generates the disconnectd event. The additional "disconnectd" event on
ifdown is not required.
For a while now, Jeffery has helped quite a lot with Python, and is now
unofficial go-to guy [for problems] with Python packages.
This change adds him as co-maintainer [if he also agrees].
I'm not going away; I'll be still doing the same work for Python.
This change serves to recognize Jeffery in an official way, since he's
already taking on these things. And 2 co-maintainers is better in case one
kicks the bucket [by accident].
Fixes: https://github.com/openwrt/packages/issues/8301
This seems to have slipped for some time. No idea if it ever worked.
It could be that this worked at some point.
This is the result of this discussion:
https://github.com/openwrt/packages/issues/8285
`urllib.request` requires the `email` module/lib, which was part of
python3-light.
This change moves the Lib/urllib folder from the python3-light into it's
own package, making it lighter. At least this way, users that want `urllib`
(on top of `python3-light`) will be forced to install it via opkg and this
will make sure `python3-email` gets installed as well.
python,python3: allow users to override python args & vars
If users want to define these before including python[3]-package.mk, these
vars will be overridden during the include.
So, override these vars if they haven't been defined.
Jeffery To [Thu, 21 Feb 2019 11:52:07 +0000 (19:52 +0800)]
python,python3: Add PYTHON_PKG_SETUP_DIR
This adds a variable (PYTHON_PKG_SETUP_DIR / PYTHON3_PKG_SETUP_DIR) that
allows a Python package Makefile to control the directory where setup.py
is called (as part of PyBuild/Compile/Default /
Py3Build/Compile/Default).
Tony Ambardar [Fri, 26 Oct 2018 01:51:11 +0000 (18:51 -0700)]
speedtest-netperf: new package to measure network performance
The speedtest-netperf.sh script measures the network throughput while
monitoring latency under load and capturing key CPU usage and frequency
statistics. The script can emulate a web-based speed test by downloading
and then uploading from an internet server, or perform simultaneous
download and upload to mimic the stress of the FLENT test program.
It simplifies tasks such as validating ISP provisioned speeds or setting
up and fine-tuning SQM, directly on the router. The CPU usage details
can also help determine if the demands of SQM, routing and other tasks
such as the test itself are exhausting the device's CPUs.
This script leverages earlier scripts from the CeroWrt project used for
bufferbloat mitigation, betterspeedtest.sh and netperfrunner.sh. They are
used with the permission of the author, Rich Brown.
Karel Kočí [Wed, 20 Feb 2019 11:51:05 +0000 (12:51 +0100)]
python,python3: do not package binary files to base packages
Thanks to fix 200a5a2eec896b2d34f1114d14df66d810c1f4bd all base packages
now contain all binaries that are generated as part of python
installation. That causes collision between those packages with package
managers that consider this such as Turris updater-ng. This is also just
wrong. Those binaries were not included and should not be after
mentioned fix as well.
This just adds empty install definition. The idea is to override the
default one that is otherwise used.
Paul Spooren [Wed, 20 Feb 2019 15:07:36 +0000 (16:07 +0100)]
fft-eval: add package
This program has been created to aid open source spectrum analyzer
development for Qualcomm/Atheros AR92xx and AR93xx based chipsets.
Find more information about the package here:
https://github.com/simonwunderlich/FFT_eval
This package is used in LibreMesh, however our CI doesn't support
multiple architecures as all LibreMesh code is lua. Adding this package
to the official repos allows us to offer it in our tool chain.
Jeffery To [Wed, 20 Feb 2019 07:19:26 +0000 (15:19 +0800)]
multiple-python-packages: Update package data
This updates the Python 2 and 3 versions of each package to share the
same title field. (For packages that only had this change, their
PKG_RELEASE were not incremented.)
This also updates the package title, url and source urls, where
necessary.
This fixes Package/*/install to call PyPackage/*/install correctly.
Previously, if a package used the default PyPackage/*/install, then it
would not called. (A custom-defined PyPackage/*/install would be called
with no issue.)
Jeffery To [Mon, 18 Feb 2019 08:11:02 +0000 (16:11 +0800)]
twisted: Rename package, fix errors
This renames the Python 2 twisted package to python-twisted, and updates
dependents (i.e. obfsproxy) to reference the updated name.
This also fixes conflicts between the Python 2 and 3 packages. Twisted
installs some scripts to /usr/bin, and previously scripts for both
packages used the same names. This adds a "3" suffix to scripts
installed by python3-twisted.
This also adds python[3]-setuptools as a dependency, as the scripts
installed to /usr/bin depend on pkg_resources (part of setuptools).
git.99rst.org / openwrt-packages.git / log