Martin Weinelt [Thu, 24 Jun 2021 16:34:47 +0000 (18:34 +0200)]
prometheus-node-exporter-lua: normalize metric names in hostapd_stations
Normalizes metrics according to the Prometheus upstream metric
guidelines available at https://prometheus.io/docs/practices/naming/.
Drops the `hostapd_station_wpa` metric, because it is misleading, as it
is not a differentiator between WPA versions, like one could be led to
assume.
Exposes more flags in a more consistent manner. Their metric was
previously only exposed if the flag was present, but not if it wasn't.
The same applies issue was fixed with regards to vht caps.
After this commit the following breaking changes are in place:
- All flags have been moved below `hostapd_station_flags_$flagname`:
- `hostapd_station_ht` is now `hostapd_station_flag_ht`
- `hostapd_station_mfp` is now `hostapd_station_flag_mfp`
- `hostapd_station_vht` is now `hostapd_station_flag_vht`
- `hostapd_station_wmm` is now `hostapd_station_flag_wmm`
- New flags have been exposed:
- `hostapd_station_flag_he` for high-efficency connections
- `hostapd_station_flag_short_preamble` for short preamble connections
- `hostapd_station_flag_auth` for authentication state
- `hostapd_station_flag_assoc` for association state
- Some metrics have had their unit normalized to the SI base unit or
embedded into the metrics name:
- `hostapd_station_inactive_msec` is now
`hostapd_station_inactive_seconds`, the value is still float64 and
as such has enough precision anyway, but becomes easier to reason
about
- `hostapd_station_connected_time` has been renamed to
`hostapd_station_connected_seconds_total` so the unit, as well as
the nature of the counter is reflected
- `hostapd_station_signal` now includes its unit and is therefore
named `hostapd_station_signal_dbm`
- The packet counter metrics have been normalized to what the node
exporter uses, so it is more in line with the defaults in the
Prometheus ecosystem:
- `hostapd_station_rx_packets` is now
`hostapd_station_receive_packets_total`
- `hostapd_station_rx_bytes` is now
`hostapd_station_receive_bytes_total`
- `hostapd_station_tx_packets` is now
`hostapd_station_transmit_packets_total`
- `hostapd_station_tx_bytes` is now
`hostapd_station_transmit_bytes_total`
Martin Weinelt [Sun, 8 Nov 2020 23:15:34 +0000 (00:15 +0100)]
prometheus-node-exporter-lua: increase label density in hostapd_stations
Correlating data is only possible when we have more metadata, this adds
a bunch of labels for each client, that will increase the depth of
dashboards yet to come.
In particular the changes in this commit are:
- renames the `ifname` label to `vif`
- adds `frequency`, `channel`, `bssid`, `ssid`, `encryption` and `mode`
python3: do a simple ls on pip & setuptools if not selected for build
I seem to forget to check/select setuptools and pip (that come bundled with
Python).
This change will do a simple 'ls' on the 2 wheel files, so that the build
fails even if just building Python.
Daniel Golle [Tue, 6 Jul 2021 04:20:12 +0000 (05:20 +0100)]
uvol: fix units with lvm backend
Free and total bytes are now properly returned as bytes by LVM2 as
requested. No longer multiply values.
Fix parameter order of 'create' command in usage output while at it.
Daniel Golle [Sat, 3 Jul 2021 14:04:33 +0000 (15:04 +0100)]
mwan3: use default routes from additional tables
Until now the additional tables listed in gobal 'rt_table_lookup' were
not considered for interfaces.
In order to be able to also use interface-defined routes from tables
other than main, consider also tables listed in 'rt_table_lookup'.
Update version to 2.10.10 as requested by maintainer.
Baptiste Jonglez [Wed, 30 Jun 2021 12:09:42 +0000 (14:09 +0200)]
tessdata: uncompress tarball only once to speed up builds
The previous approach was to uncompress N times a big tarball (638 MB)
where N=130 is the number of supported languages. Each iteration would
only extract a single file, but it still needs to uncompress the whole
tarball. This is of course completely inefficient.
Now, we uncompress the tarball only once to extract all relevant files,
and then iterate N times to copy the file needed for each language.
This massively speeds up builds, at the expense of temporarily requiring
more build space (about 1 GB more)
Dirk Brenken [Tue, 29 Jun 2021 19:03:33 +0000 (21:03 +0200)]
adblock: update 4.1.3-2
* add a tcpdump option to resolve IPs in adblock reporting,
set 'adb_represolve' accordingly (disabled by default). If enabled
tcpdump will perform a reverse DNS (PTR) lookup for each IP address
* add 'stalkerware' source (provided by @astryzia)
* update readme
David Bauer [Tue, 29 Jun 2021 16:38:39 +0000 (18:38 +0200)]
udhcpsnoop: import package from TIP
Import the udhcpsnoop package from the TIP feed.
The original Makefile in TIP repo spcifies GPL-2.0 as the PKG_LICENSE.
However this is a mistake, as the SPDX headers of the repos source files
all specify BSD-3-Clause as their license.
See https://github.com/Telecominfraproject/wlan-ap/blob/uCentral-trunk/feeds/ucentral/udhcpsnoop/Makefile
Josef Schlehofer [Tue, 29 Jun 2021 07:09:32 +0000 (09:09 +0200)]
Revert "uci2: update revision"
I'm reverting this commit, because it is pulling newer source code, but
without doing a new version bump. This results that users who already
installed this library on their router will have different package
content than users who installed it after the commit.
The another small reason is that commit subject - update revision is cryptic itself and should be more bulletproof like saying update to version 1.1
More details: https://github.com/openwrt/packages/pull/15990#issuecomment-870333695
fastd: make L2TP support a config option instead of a variant
We enable the option by default, but do not depend on the kernel modules
required for L2TP offloading to avoid wasting space when the feature is
not needed. To use offloading, kmod-l2tp-eth must be installed.
The UMAC-based methods provide higher performance than GMAC and aren't
suspectible to timing attacks when implemented in software (which is
always the case on OpenWrt, as OpenSSL support is disabled). Disable
GMAC by default to save a few KiB.
Gerard Ryan [Sun, 27 Jun 2021 06:11:34 +0000 (16:11 +1000)]
cache-domains: Fixed missing wildcard entries
The fix requires the use of the generated dnsmasq `lancache.conf` file.
So I moved configuration of the hosts directory out of the UCI and into
the generated dnsmasq configuration file to simplify the script.
David Yang [Wed, 23 Jun 2021 15:07:33 +0000 (23:07 +0800)]
dante: adopt package
Give this package more love by adopting it :)
Changes since 1.4.1-4:
* change maintainer to me
* update to 1.4.3
+ add example config files sockd.conf and socks.conf
+ add service file for sockd
* update 200-fix-RTLD_NEXT.patch
- remove merged 210-deactivate-sched_setscheduler.patch
* fix Autoconf build file
Florian Eckert [Wed, 23 Jun 2021 09:54:30 +0000 (11:54 +0200)]
libmariadb: fix compilation cmake issue
This patch fixes the compilation issue of the upstream Cmake file.
If this patch is not applied we get the following compilation error output.
CMake Error at cmake/ConnectorName.cmake:30 (ENDMACRO):
Flow control statements are not properly nested.
Call Stack (most recent call first):
CMakeLists.txt:423 (INCLUDE)
The blamed cmake/ConnectorName.cmake file gets fixed with this patch.
git.99rst.org / openwrt-packages.git / log