Junio C Hamano [Sun, 19 Jul 2026 17:42:19 +0000 (10:42 -0700)]
Merge branch 'kk/commit-graph-topo-levels-fix'
The 'topo_levels' slab was propagated only to the topmost layer of a
split commit-graph chain, causing topological levels for commits in
base layers to be recomputed during incremental writes. This has been
corrected.
* kk/commit-graph-topo-levels-fix:
commit-graph: propagate topo_levels slab to all chain layers
commit-graph: add trace2 instrumentation for generation DFS
Junio C Hamano [Sun, 19 Jul 2026 17:42:19 +0000 (10:42 -0700)]
Merge branch 'ty/migrate-ignorecase'
The global configuration variable 'ignore_case' (representing the
'core.ignorecase' configuration) has been migrated into 'struct
repo_config_values' to tie it to a specific repository instance.
* ty/migrate-ignorecase:
config: use repo_ignore_case() to access core.ignorecase
environment: move ignore_case into repo_config_values
Junio C Hamano [Sun, 19 Jul 2026 17:42:19 +0000 (10:42 -0700)]
Merge branch 'tc/bundle-uri-empty-fix'
The client-side parser of the server-advertised bundle-URI list has
been updated to drain the remaining response in order to avoid
protocol desynchronization when the server sends a misconfigured list.
Also, the server-side has been taught to omit empty configuration
values instead of sending invalid key-value lines.
Junio C Hamano [Sun, 19 Jul 2026 17:42:18 +0000 (10:42 -0700)]
Merge branch 'hf/unpack-trees-quadratic-scan'
The cache-scanning loop in 'next_cache_entry()' has been optimized
to avoid rescanning already-unpacked index entries, preventing a
quadratic performance slow-down when diffing the working tree
against a commit with a pathspec matching early index entries.
* hf/unpack-trees-quadratic-scan:
unpack-trees: avoid quadratic index scan in next_cache_entry()
The contributor guide has been updated to advise new contributors to
trim irrelevant quoted text when replying to review comments, matching
the existing advice given to reviewers.
* wy/doc-myfirstcontribution-trim-quotes:
MyFirstContribution: mention trimming quoted text in replies
Junio C Hamano [Sun, 19 Jul 2026 17:42:18 +0000 (10:42 -0700)]
Merge branch 'gr/t1410-reflog-exit-code'
The pipelines in 't1410-reflog.sh' have been replaced with the
'test_stdout_line_count' helper to avoid suppressing the exit code of
'git' commands, ensuring failures are not hidden from the test suite.
* gr/t1410-reflog-exit-code:
t1410-reflog.sh: avoid suppressing git's exit code in pipelines
Junio C Hamano [Sun, 19 Jul 2026 17:42:17 +0000 (10:42 -0700)]
Merge branch 'mm/test-grep-lint'
The test suite has been updated to use the 'test_grep' helper instead
of bare 'grep' for test assertions, allowing file contents to be
printed on failure for easier debugging. A new 'greplint' linter has
been introduced to detect and prevent new bare 'grep' assertions from
being added to the test suite.
* mm/test-grep-lint:
t: add greplint to detect bare grep assertions
t: convert grep assertions to test_grep
t: fix Lexer line count for $() inside double-quoted strings
t: extract chainlint's parser into shared module
t: fix grep assertions missing file arguments
t/README: document test_grep helper
Junio C Hamano [Sun, 19 Jul 2026 17:42:16 +0000 (10:42 -0700)]
Merge branch 'sn/osxkeychain-rust-universal'
The build system has been updated to support building universal macOS
binaries when 'Rust' is enabled, by compiling separate static archives
for each target triple listed in 'RUST_TARGETS' and combining them
using the macOS 'lipo' tool. The 'git-credential-osxkeychain' helper
has been updated to link against '$(RUST_LIB)' when 'Rust' is enabled.
* sn/osxkeychain-rust-universal:
contrib: wire up osxkeychain in contrib/Makefile on macOS
Makefile: support universal macOS builds via RUST_TARGETS
Makefile: add $(RUST_LIB) prerequisite to osxkeychain
Junio C Hamano [Sun, 19 Jul 2026 17:42:16 +0000 (10:42 -0700)]
Merge branch 'bc/parse-options-exit-0-on-help'
Option parsing with 'git rev-parse --parseopt' and in most 'git'
subcommands has been updated to exit with 0 (instead of 129) when the
help option ('-h' or '--help') is requested directly by the user,
aligning with standard Unix convention.
* bc/parse-options-exit-0-on-help:
parse-options: exit 0 on -h
rev-parse: have --parseopt callers exit 0 on --help
parse-options: add a separate case for help output on error
t1517: skip svn tests if svn is not installed
Junio C Hamano [Sun, 19 Jul 2026 17:42:16 +0000 (10:42 -0700)]
Merge branch 'jc/submitting-patches-abandoning'
The 'SubmittingPatches' document has been updated to explicitly
describe the expectation for contributors to retract or abandon their
patch series when they are no longer pursuing it.
* jc/submitting-patches-abandoning:
SubmittingPatches: document how to retract a topic
Junio C Hamano [Sun, 19 Jul 2026 17:42:16 +0000 (10:42 -0700)]
Merge branch 'kk/commit-reach-find-all-fix'
The early-exit optimization in 'paint_down_to_common()' has been
gated on the queue being generation-ordered, fixing a bug where
'git merge-base' (without '--all') could return incorrect results
on repositories with v1 commit graphs and clock skew.
* kk/commit-reach-find-all-fix:
commit-reach: guard !FIND_ALL early exit with generation ordering check
t6600: add test for merge-base early exit with clock skew
Junio C Hamano [Sun, 19 Jul 2026 17:42:15 +0000 (10:42 -0700)]
Merge branch 'jc/relnotes-2.55-rust-fix'
A description in the release notes for Git 2.55.0 has been
retroactively updated to clarify that Rust support is enabled by
default, but still optional, and will become mandatory in Git 3.0.
* jc/relnotes-2.55-rust-fix:
Rust: fix description in Release Notes to 2.55
Junio C Hamano [Sun, 19 Jul 2026 17:42:15 +0000 (10:42 -0700)]
Merge branch 'ps/setup-split-discovery-and-setup'
The repository discovery and repository configuration phases, which
were previously intertwined in 'setup.c', have been split. Repository
discovery has been updated to populate a 'struct repo_discovery'
without modifying the repository state, which is then taken by
repository configuration to initialize the repository, paving the way
for clean unification of repository configuration.
* ps/setup-split-discovery-and-setup:
setup: mark `set_git_work_tree()` as file-local
setup: pass worktree to `init_db()`
setup: drop redundant configuration of `startup_info->have_repository`
setup: make repository discovery self-contained
setup: propagate prefix via repository discovery
setup: drop static `cwd` variable
setup: move prefix into repository
setup: embed repository format in discovery
setup: introduce explicit repository discovery
setup: split up concerns of `setup_git_env_internal()`
setup: unify setup of shallow file
setup: mark bogus worktree in `apply_repository_format()`
setup: rename `check_repository_format_gently()`
Junio C Hamano [Sun, 19 Jul 2026 17:42:14 +0000 (10:42 -0700)]
Merge branch 'ps/reftable-hardening'
The 'reftable' code has been hardened against corrupted tables by
fixing out-of-bounds writes, out-of-bounds reads, and abort calls
during parsing.
* ps/reftable-hardening:
reftable/table: fix OOB read on truncated table
reftable/table: fix NULL pointer access when seeking to bogus offsets
reftable/block: fix OOB read with bogus restart offset
reftable/block: fix use of uninitialized memory when binsearch fails
reftable/block: fix OOB read with bogus restart count
reftable/block: fix OOB read with bogus block size
reftable/block: fix OOB write with bogus inflated log size
t/unit-tests: introduce test helper to write reftable blocks
reftable/record: don't abort when decoding invalid ref value type
reftable/basics: fix OOB read on binary search of empty range
oss-fuzz: add fuzzer for parsing reftables
meson: support building fuzzers with libFuzzer
Junio C Hamano [Fri, 17 Jul 2026 06:05:48 +0000 (23:05 -0700)]
Merge branch 'mm/sideband-ansi-sgr-colon-fix'
The sideband demultiplexer has been updated to recognize ANSI SGR
escape sequences that use colon-separated subfields (e.g., for
256-color or true-color codes).
* mm/sideband-ansi-sgr-colon-fix:
sideband: allow ANSI SGR with colon-separated subfields
Junio C Hamano [Fri, 17 Jul 2026 06:05:48 +0000 (23:05 -0700)]
Merge branch 'jk/git-hash-cleanups'
The 'git_hash_*()' wrappers have been updated to be used consistently
across the codebase instead of direct calls to members of 'struct
git_hash_algo', and 'git_hash_discard()' has been made idempotent to
simplify cleanups.
* jk/git-hash-cleanups:
hash: check ctx->active flag in all wrapper functions
http: use idempotent git_hash_discard()
csum-file: use idempotent git_hash_discard()
hash: make git_hash_discard() idempotent
hash: document function pointers and wrappers
hash: convert remaining direct function calls
hash: use git_hash_init() consistently
Junio C Hamano [Fri, 17 Jul 2026 06:05:47 +0000 (23:05 -0700)]
Merge branch 'ih/precompose-flex-array'
The UTF-8 precomposition wrapper on macOS has been updated to use a
flexible array member to represent the name of a directory entry,
preventing fortified libc checks from failing when the name is
reallocated to be larger than 'NAME_MAX' bytes.
* ih/precompose-flex-array:
precompose_utf8: use a flex array for d_name
Junio C Hamano [Fri, 17 Jul 2026 06:05:47 +0000 (23:05 -0700)]
Merge branch 'ps/t-fixes-for-git-test-long'
Various test scripts have been updated to clean up large temporary
files and repositories, reducing peak disk usage during testing.
Also, expensive tests have been disabled on platforms that lack
sufficient resources (like 32-bit platforms and Windows CI runners),
and the long test suite has been enabled in GitLab CI.
* ps/t-fixes-for-git-test-long:
gitlab-ci: enable "GIT_TEST_LONG"
gitlab-ci: disable RAM disk on macOS jobs
t: use `test_bool_env` to parse GIT_TEST_LONG
t7900: clean up large EXPENSIVE repository
t7508: skip EXPENSIVE test that is broken without SIZE_T_IS_64BIT
t5608: reduce maximum disk usage
t4141: fix inefficient use of dd(1)
t0021: skip EXPENSIVE test that is broken without SIZE_T_IS_64BIT
README: add GitLab CI badge to make it more discoverable
Junio C Hamano [Fri, 17 Jul 2026 06:05:47 +0000 (23:05 -0700)]
Merge branch 'js/ci-dockerized-pid-limit'
Dockerized CI jobs running in private GitHub repositories have been
adjusted to use explicit process and file limits, preventing resource
exhaustion errors on private runners.
* js/ci-dockerized-pid-limit:
ci(dockerized): raise the PID limit for private repositories
Junio C Hamano [Fri, 17 Jul 2026 06:05:47 +0000 (23:05 -0700)]
Merge branch 'js/coverity-fixes'
Various resource leaks, invalid file descriptor closures, and process
handle ownership issues flagged by Coverity have been fixed.
* js/coverity-fixes:
mingw: make `exit_process()` own the process handle on all paths
fsmonitor: plug token-data leak on early daemon-startup failures
reftable/table: release filter on error path
imap-send: avoid leaking the IMAP upload buffer
worktree: fix resource leaks when branch creation fails
submodule: fix cwd leak in `get_superproject_working_tree()`
dir: free allocations on parse-error paths in `read_one_dir()`
line-log: avoid redundant copy that leaks in process_ranges
run-command: avoid `close(-1)` in `start_command()` error paths
download_https_uri_to_file(): do not leak fd upon failure
loose: avoid closing invalid fd on error path
load_one_loose_object_map(): fix resource leak
Junio C Hamano [Fri, 17 Jul 2026 06:05:46 +0000 (23:05 -0700)]
Merge branch 'jk/hash-algo-leak-fixes'
Various code paths that initialize a cryptographic hash context but
bail out or finish without calling 'git_hash_final()' have been taught
to call 'git_hash_discard()' to release allocated resources, fixing
memory leaks when Git is built with non-default backends like
'OpenSSL' or 'libgcrypt'.
* jk/hash-algo-leak-fixes:
hash: add platform-specific discard functions
hash: fix memory leak copying sha256 gcrypt handles
http: discard hash in dumb-http http_object_request
check_stream_oid(): discard hash on read error
patch-id: discard hash when done
csum-file: provide a function to release checkpoints
csum-file: always finalize or discard hash
hash: add discard primitive
csum-file: drop discard_hashfile()
Junio C Hamano [Fri, 17 Jul 2026 06:05:46 +0000 (23:05 -0700)]
Merge branch 'js/wincred-fixes'
The wincred credential helper has been updated to avoid memory
corruption when erasing credentials and to prevent silent
credential loss when storing OAuth tokens, by correcting buffer
allocations and arguments passed to safe-CRT APIs.
* js/wincred-fixes:
wincred: prevent silent credential loss when storing OAuth tokens
wincred: avoid memory corruption when erasing a credential
wincred: prevent silent credential loss when storing OAuth tokens
When `git credential approve` hands the wincred helper a password
together with an `oauth_refresh_token`, the OAuth branch of
`store_credential()` writes one WCHAR past the allocation while
formatting both fields into a single `CredentialBlob`. On Windows
this trips heap verification and tears the helper down with status
`0xC0000374`; `approve` masks the failure, so the credential the
user meant to save never reaches `CredWriteW()` and the next
session prompts for it again.
The bug has the same shape as the one fixed in the previous commit:
the allocation leaves no room for the terminating NUL, and the
`sizeOfBuffer` argument to `_snwprintf_s()` is a byte count where
the API expects a WCHAR count, which lets the safe-CRT runtime
write the terminator out of bounds.
Apply the same remedy d22a488482 (wincred: avoid memory corruption,
2025-11-17) applied in `get_credential()`: allocate `(wlen + 1) *
sizeof(WCHAR)` bytes and pass `wlen + 1` as the destination
capacity in WCHARs.
This closes the second of the two heap writes tracked under
GHSA-rxqw-wxqg-g7hw.
Assisted-by: Opus 4.7 Signed-off-by: Johannes Schindelin <redacted> Signed-off-by: Junio C Hamano <redacted>
wincred: avoid memory corruption when erasing a credential
The earlier d22a488482 (wincred: avoid memory corruption, 2025-11-17)
repaired only get_credential(); match_cred_password() has the same
defect and is reached on `git credential reject`. When Git asks the
helper to erase a stored credential whose password was supplied by
the caller, the helper copies the candidate's password into a freshly
allocated buffer for comparison. That copy overruns the allocation
by one WCHAR of NUL, which on uninstrumented Windows manifests as
process termination with status 0xC0000374. Because the helper can
die before reaching CredDeleteW(), `git credential reject` masks the
failure and the rejected credential remains stored.
CredentialBlobSize is documented as a byte count, so for an N-WCHAR
blob it equals N * sizeof(WCHAR). The pre-fix code allocated that
many bytes and asked wcsncpy_s to copy N wide characters, but
wcsncpy_s always appends a terminating NUL WCHAR, writing one WCHAR
past the allocation. The destination-capacity argument was also
passed in bytes rather than in WCHAR elements as the API requires,
so the safe-CRT runtime never rejected the copy.
See GHSA-rxqw-wxqg-g7hw.
Assisted-by: Opus 4.7 Signed-off-by: Johannes Schindelin <redacted> Signed-off-by: Junio C Hamano <redacted>
Junio C Hamano [Thu, 16 Jul 2026 17:48:52 +0000 (10:48 -0700)]
Merge branch 'master' of https://github.com/j6t/git-gui
* 'master' of https://github.com/j6t/git-gui:
git-gui: allow larger width for the commit message field
git-gui: reduce complexity of the quiet msgfmt rule
git-gui: drop msgfmt --statistics output
git-gui i18n: Update Bulgarian translation (562t)
Junio C Hamano [Wed, 15 Jul 2026 20:24:19 +0000 (13:24 -0700)]
Merge branch 'rs/blame-abbrev-marks'
The alignment of commit object name abbreviations in 'git blame'
output has been optimized to reserve a column for marks (caret,
question mark, or asterisk) only when such marks are actually shown.
* rs/blame-abbrev-marks:
blame: reserve mark column only if necessary
Junio C Hamano [Wed, 15 Jul 2026 20:24:19 +0000 (13:24 -0700)]
Merge branch 'mg/meson-hook-list-buildfix'
A racy build failure under Meson has been corrected by ensuring that
the generated header file 'hook-list.h' is built before compiling
files in 'builtin_sources' that depend on it.
* mg/meson-hook-list-buildfix:
meson: restore hook-list.h to builtin_sources
Junio C Hamano [Wed, 15 Jul 2026 20:24:19 +0000 (13:24 -0700)]
Merge branch 'jk/bloom-leak-fixes'
Various memory leaks in the Bloom-filter code paths that are exposed
when running tests with the 'GIT_TEST_COMMIT_GRAPH_CHANGED_PATHS=1'
environment variable have been plugged.
* jk/bloom-leak-fixes:
line-log: drop extra copy of range with bloom filters
revision: avoid leaking bloom keyvecs with multiple traversals
bloom: make bloom-filter slab initialization idempotent
Junio C Hamano [Wed, 15 Jul 2026 20:24:18 +0000 (13:24 -0700)]
Merge branch 'ps/history-drop'
The experimental 'git history' command has been taught a new 'drop'
subcommand to remove a commit, with its descendants replayed onto its
parent.
* ps/history-drop:
builtin/history: implement "drop" subcommand
builtin/history: split handling of ref updates into two phases
replay: expose `replay_result_queue_update()`
reset: stop assuming that the caller passes in a clean index
reset: allow the caller to specify the current HEAD object
reset: introduce ability to skip updating HEAD
reset: introduce dry-run mode
reset: modernize flags passed to `reset_working_tree()`
reset: rename `reset_head()`
reset: drop `USE_THE_REPOSITORY_VARIABLE`
read-cache: split out function to drop unmerged entries to stage 0
Junio C Hamano [Wed, 15 Jul 2026 20:24:18 +0000 (13:24 -0700)]
Merge branch 'ps/odb-drop-whence'
The 'whence' field in 'struct object_info' has been removed. The
backend-specific object information retrieval has been refactored into
an opt-in 'struct object_info_source' structure.
* ps/odb-drop-whence:
odb: document object info fields
odb: drop `whence` field from object info
treewide: convert users of `whence` to the new source field
odb: add `source` field to struct object_info_source
odb: make backend-specific fields optional
packfile: thread odb_source_packed through packed_object_info()
Junio C Hamano [Wed, 15 Jul 2026 20:24:18 +0000 (13:24 -0700)]
Merge branch 'ps/refs-writing-subcommands'
The 'git refs' toolbox has been extended with new 'create', 'delete',
'update', and 'rename' subcommands to create, delete, update, and
rename references, respectively.
Junio C Hamano [Mon, 13 Jul 2026 15:27:27 +0000 (08:27 -0700)]
Merge branch 'ps/odb-generalize-prepare'
The 'reprepare()' callback for object database sources has been
generalized into a 'prepare()' callback with an optional flush cache
flag, and a new 'odb_prepare()' wrapper has been introduced to allow
pre-opening object database sources.
Junio C Hamano [Mon, 13 Jul 2026 15:27:27 +0000 (08:27 -0700)]
Merge branch 'kk/prio-queue-get-put-fusion'
The lazy priority queue optimization pattern (deferring actual removal
in 'prio_queue_get()' to allow get+put fusion) has been folded
directly into 'prio_queue' itself, speeding up commit traversal
workflows and simplifying callers.
* kk/prio-queue-get-put-fusion:
prio-queue: fold lazy_queue into prio_queue for automatic get+put fusion
prio-queue: rename .nr to .nr_ and add accessor helpers
Junio C Hamano [Mon, 13 Jul 2026 15:27:27 +0000 (08:27 -0700)]
Merge branch 'hn/branch-push-slip-advice'
When 'git push origin/main' or 'git branch origin main' is run, the
command is now recognized as a potential typo, and advice has been
added to offer a typo fix.
* hn/branch-push-slip-advice:
push: suggest <remote> <branch> for a slash slip
branch: suggest <remote>/<branch> on upstream slip
Junio C Hamano [Mon, 13 Jul 2026 15:27:26 +0000 (08:27 -0700)]
Merge branch 'jk/format-patch-leakfix'
A memory leak in the '--base' handling of 'git format-patch' has been
plugged, and the leak reporting of the test suite when running under a
TAP harness has been improved.
* jk/format-patch-leakfix:
format-patch: fix leak of rev_info in prepare_bases()
t: move LSan errors from stdout to stderr
Junio C Hamano [Mon, 13 Jul 2026 15:27:26 +0000 (08:27 -0700)]
Merge branch 'jk/reftable-leakfix'
A memory leak in the 'reftable_writer_new()' initialization function
has been fixed by delaying the allocation of 'struct reftable_writer'
until after input options are validated.
* jk/reftable-leakfix:
reftable: fix unlikely leak on API error
Junio C Hamano [Mon, 13 Jul 2026 15:27:26 +0000 (08:27 -0700)]
Merge branch 'ad/gpg-strip-cr-before-lf'
The GPG and SSH signature parsing code has been corrected to strip
carriage return characters only when they immediately precede line
feeds, instead of unconditionally stripping all carriage returns.
* ad/gpg-strip-cr-before-lf:
gpg-interface: fix strip_cr_before_lf to only remove CR before LF
commit-graph: propagate topo_levels slab to all chain layers
The topo_levels slab is only propagated to the topmost graph
layer instead of all layers in the chain. Commits from lower
layers appear to have no generation numbers, so the DFS
re-walks the entire ancestry.
Fix by making topo_levels visible to all layers, not just
the first one.
Signed-off-by: Kristofer Karlsson <redacted> Signed-off-by: Junio C Hamano <redacted>
commit-graph: add trace2 instrumentation for generation DFS
Count the number of steps taken in
compute_reachable_generation_numbers() and expose it via
trace2 to make it easier to detect performance regressions.
Add a failing test for such a regression, introduced in 199d452758 (commit-graph: return the prepared commit graph
from `prepare_commit_graph()`, 2025-09-04), where incremental
commit-graph writes do not see existing generation numbers
from lower graph layers and fall back to walking the full
ancestry.
Signed-off-by: Kristofer Karlsson <redacted> Signed-off-by: Junio C Hamano <redacted>
t1410-reflog.sh: avoid suppressing git's exit code in pipelines
Piping git commands directly to wc -l suppresses the exit code of
git, hiding potential failures from the test suite. Use
test_stdout_line_count instead, which handles exit code preservation
internally while keeping the test logic clean and readable.
Signed-off-by: Gatla Vishweshwar Reddy <redacted> Signed-off-by: Junio C Hamano <redacted>
unpack-trees: avoid quadratic index scan in next_cache_entry()
Diffing the working tree against a commit with a pathspec can take
time quadratic in the size of the index when the pathspec matches a
subtree whose entries are the first entries of the index. Fix it by
having next_cache_entry() record how far it scanned in cache_bottom,
so repeated calls no longer rescan the growing prefix of
already-unpacked entries. On a Chromium checkout (~500k index
entries),
git diff HEAD -- .agents/OWNERS
took about 8 minutes before this change and 0.07 seconds after it.
The same diff without the commit, without the pathspec, or with
--cached was already instant.
Add p0009-diff-pathspec.sh, which builds a 10,000-entry index whose
first path lives in a subtree (100,000 entries under --long-tests),
to guard against the regression. Comparing v2.55.0 with this change
using GIT_TEST_LONG=t:
Test v2.55.0 HEAD
------------------------------------------------------------------------
0009.2: diff pathspec subtree 7.16(7.12+0.01) 0.02(0.01+0.00) -99.7%
Signed-off-by: Henrique Ferreiro <redacted> Signed-off-by: Junio C Hamano <redacted>
When bundle-URI info is requested by the client, the server responds
with all "bundle.*" config lines as key=value packet lines. On the
client-side, the received bundle config packet lines are always expected
to contain both a key and a value otherwise the client errors out during
parsing. The server performs no validation of the read bundle
configuration though which results in any misconfiguration on the
server-side, such as bundle configuration with an empty value, being
blindly sent to the client.
To avoid having the server transmit invalid configuration to clients,
only send bundle configuration that has non-empty values.
This change makes bundle-URI information sent by the server
syntactically correct, but semantically it still can be invalid. For
example the server may end up sending `bundle.bundle-1.creationToken`,
but be lacking a `bundle.bundle-1.uri` for that bundle. The `uri` is
mandatory, thus the client cannot process this bundle and will error
with the message:
error: bundle 'bundle-1' has no uri
Fixing this would require a more complex solution, because bundles need
to be validated as a whole and not line-by-line. This is considered
outside the scope of this change.
Co-authored-by: Toon Claes <redacted> Signed-off-by: Justin Tobler <redacted> Signed-off-by: Toon Claes <redacted> Signed-off-by: Junio C Hamano <redacted>
bundle-uri: drain remaining response on invalid bundle-uri lines
On clone, when the client sends the `bundle-uri` command, the server
might respond with invalid data. For example if it sends information
about a bundle where the 'uri' is empty, it produces the following
error:
Cloning into 'foo'...
error: bundle-uri: line has empty key or value
error: error on bundle-uri response line 4: bundle.bundle-1.uri=
error: could not retrieve server-advertised bundle-uri list
This error is bubbled up to `transport_get_remote_bundle_uri()`, which
is called by `cmd_clone()` in builtin/clone.c. Over here, the return
value is ignored, so clone continues.
Despite this, it still dies with this error:
fatal: expected 'packfile'
This happens because `get_remote_bundle_uri()` exited early, leaving
some unprocessed packet data behind in the read buffer. This is
misleading to the user, because it suggests a problem with the packfile
exchange, when in reality it's caused by a misconfigured bundle-URI on
the server-side.
Fix this by continuing to read packets when an error was encountered,
but without processing the remaining lines. This drains the protocol
stream so no stale data is left behind and the caller can use it if they
like.
With this, clone now continues successfully if invalid bundle-URI data
was sent by the server. This is intentional, because since the inception
of `transport_get_remote_bundle_uri()` in 0cfde740f0 (clone: request the
'bundle-uri' command when available, 2022-12-22) the return value of
that function is ignored in `cmd_clone()` so the clone can continue
without bundles.
Signed-off-by: Toon Claes <redacted> Signed-off-by: Junio C Hamano <redacted>
Junio C Hamano [Wed, 8 Jul 2026 17:09:49 +0000 (10:09 -0700)]
SubmittingPatches: document how to retract a topic
While this document outlines an idealized lifecycle where an author
develops a patch, refines it with reviewer feedback, and
successfully merges it into Git, reality is rarely so seamless.
Sometimes, a topic must be abandoned. Doing so explicitly is far
better than leaving it in limbo, especially since topics can always
be resurrected later.
Clearly state that we encourage contributors to retract any topic
that does not pan out.
Shardul Natu [Wed, 8 Jul 2026 03:21:19 +0000 (03:21 +0000)]
contrib: wire up osxkeychain in contrib/Makefile on macOS
When running "make test" with TEST_CONTRIB_TOO=yes (which is default in
macOS CI workflows), $(MAKE) -C contrib/ test is invoked. However,
contrib/Makefile only invoked tests for diff-highlight and subtree,
meaning git-credential-osxkeychain was never built or verified during
standard CI test runs.
Add a "test" target to contrib/credential/osxkeychain/Makefile that
depends on building git-credential-osxkeychain. Additionally, wire up
credential/osxkeychain in contrib/Makefile under "all", "test", and
"clean" whenever running on macOS (Darwin).
This ensures that running "make test" or "make all" in contrib on macOS
automatically builds and links git-credential-osxkeychain, preventing
future build or symbol linking regressions from slipping through CI.
Signed-off-by: Shardul Natu <redacted> Signed-off-by: Junio C Hamano <redacted>
Shardul Natu [Wed, 8 Jul 2026 03:21:18 +0000 (03:21 +0000)]
Makefile: support universal macOS builds via RUST_TARGETS
On macOS, Universal Binaries contain native executable code for
multiple architectures (such as Intel x86_64 and Apple Silicon arm64)
bundled into a single file. This is standard practice for macOS
distribution and CI packaging (such as internal distribution packages
or tooling like Burrito/Homebrew), allowing a single build artifact
to run natively across all Macs without Rosetta emulation or
maintaining separate packages.
When building Git C code for multiple architectures on macOS, the
Apple toolchain (clang) natively supports universal builds via
CFLAGS/LDFLAGS. When "-arch x86_64 -arch arm64" is passed, clang
automatically compiles and links universal binaries for all C object
files and executables out of the box.
Cargo and rustc, however, do not support multiple "-arch" flags or
emitting universal binaries in a single invocation. Instead, Cargo
requires invoking each target triple independently (e.g., passing
"--target x86_64-apple-darwin" and "--target aarch64-apple-darwin").
To bridge this gap when Rust is enabled:
1. Allow specifying space-separated target triples in RUST_TARGETS.
2. Introduce declarative pattern rules (target/%/...) to compile
each target-specific library slice via Cargo.
3. On macOS, if multiple targets are specified, use "lipo" (part of
the mandatory Xcode Command Line Tools) to combine the resulting
static libraries into target/release/libgitcore.a.
Once $(RUST_LIB) is compiled into a universal static archive, the
standard C linker seamlessly links it with the C object files to
produce universal Git executables.
Signed-off-by: Shardul Natu <redacted> Signed-off-by: Junio C Hamano <redacted>
Shardul Natu [Wed, 8 Jul 2026 03:21:17 +0000 (03:21 +0000)]
Makefile: add $(RUST_LIB) prerequisite to osxkeychain
When Rust is enabled, the git-credential-osxkeychain helper depends on
Rust symbols compiled into $(RUST_LIB). While commit 522ea8ef7d
("osxkeychain: fix build with Rust") updated the linker command line to
use $(LIBS), it omitted $(RUST_LIB) from the target prerequisite list.
Without this prerequisite, running a parallel build ("make -j") from a
clean working tree can fail because Make does not know to invoke Cargo
to build libgitcore.a before linking git-credential-osxkeychain.
Note that we depend explicitly on $(LIB_FILE) and $(RUST_LIB) rather
than $(GITLIBS). Unlike standard Git builtins and programs like scalar
(which define cmd_main() and rely on common-main.o to supply main()),
git-credential-osxkeychain.c defines its own standalone int main().
If $(GITLIBS) were used, $(filter %.o,$^) in the link recipe would
match both git-credential-osxkeychain.o and common-main.o, causing a
duplicate symbol linking error for _main on macOS.
Additionally, wrap the definitions of $(RUST_LIB) and the "rust" build
target in "ifndef NO_RUST". This ensures that when NO_RUST=1 is
specified, $(RUST_LIB) evaluates to empty, making the Rust dependency a
clean no-op without needing intermediate variables.
Signed-off-by: Shardul Natu <redacted> Signed-off-by: Junio C Hamano <redacted>
Jeff King [Wed, 8 Jul 2026 03:53:05 +0000 (23:53 -0400)]
hash: check ctx->active flag in all wrapper functions
It only makes sense to call git_hash_update(), etc, on a hash context
that has been initialized but not yet finalized or discarded. This is an
unlikely error to make, but it's easy for us to catch it and complain.
It's especially important because it would quietly "work" for many hash
backends (like sha1dc, which is just manipulating some bytes) but would
cause undefined behavior with others (like OpenSSL, which puts the
context onto the heap). Checking the flag lets us catch problems
consistently on every build.
Note that we can't do the same for git_hash_init(). Even though it would
cause a leak to call it twice (without an intervening final/discard),
the point of the function is that the contents of the struct are
undefined before the call. But calling it twice is an even less likely
error to make, so not covering it is OK.
We leave git_hash_discard() alone, as its idempotent behavior is
convenient for callers. We _could_ try to do something similar for
git_hash_final(), allowing:
but it does not make much sense. After the first final() call we have
thrown away the state, so we cannot produce the same output. We could
come up with some sensible output (the null hash, or the empty hash),
but double-calls like this are more likely a bug, so our best bet is to
complain loudly (whereas the current code produces either nonsense
output or undefined behavior, depending on the backend).
Signed-off-by: Jeff King <redacted> Signed-off-by: Junio C Hamano <redacted>
Jeff King [Wed, 8 Jul 2026 03:53:02 +0000 (23:53 -0400)]
http: use idempotent git_hash_discard()
Now that it is OK to call git_hash_discard() even after finalizing the
hash, we no longer need the ctx_valid bool added by a2d8ea5a76 (http:
discard hash in dumb-http http_object_request, 2026-07-02).
Signed-off-by: Jeff King <redacted> Signed-off-by: Junio C Hamano <redacted>
Jeff King [Wed, 8 Jul 2026 03:53:00 +0000 (23:53 -0400)]
csum-file: use idempotent git_hash_discard()
Now that it is safe to call git_hash_discard() even after finalizing it,
we can simplify our cleanup logic a bit. This is mostly undoing a few
bits of 64337aecde (csum-file: always finalize or discard hash,
2026-07-02):
- We no longer need a separate free_hashfile_memory() function for
finalize_hashfile(). It can just call free_hashfile(), which will
now discard (or not) the hash as appropriate.
- When f->skip_hash is set, we don't need to discard; we can rely on
free_hashfile() to do it.
Signed-off-by: Jeff King <redacted> Signed-off-by: Junio C Hamano <redacted>
Jeff King [Wed, 8 Jul 2026 03:52:57 +0000 (23:52 -0400)]
hash: make git_hash_discard() idempotent
You must always either finalize or discard a hash context to release any
resources, but you must call only one such function. This creates extra
work for some callers, since their cleanup code paths need to know
whether they got there via their happy path (and the finalization
happened) or due to an error (in which case they need to discard).
Let's add an "active" flag that turns a redundant discard into a noop.
That lets you safely do this:
git_hash_init(&ctx, algo);
...
if (some_error)
goto out;
...
git_hash_final(result, &ctx);
out:
git_hash_discard(&ctx);
This should avoid future errors, and will also let us simplify a few
existing callers (in future patches).
Signed-off-by: Jeff King <redacted> Signed-off-by: Junio C Hamano <redacted>
Jeff King [Wed, 8 Jul 2026 03:52:55 +0000 (23:52 -0400)]
hash: document function pointers and wrappers
We want people to use the git_hash_*() wrappers rather than the bare
function pointers in the git_hash_algo struct. Let's document them
rather than the bare pointers, and warn people away from the pointers.
Coccinelle will eventually force the use of the wrappers, but it's
helpful to lead readers in the right direction from the start.
While we're here we can document a few other bits of wisdom I've turned
up while working in this area:
- You have to initialize the destination of a git_hash_clone(). This
is something we may eventually change for efficiency, but we should
definitely document the requirement for now.
- You must eventually finalize or discard a hash, since some backends
may allocate resources during initialization.
Signed-off-by: Jeff King <redacted> Signed-off-by: Junio C Hamano <redacted>
Jeff King [Wed, 8 Jul 2026 03:52:53 +0000 (23:52 -0400)]
hash: convert remaining direct function calls
The previous patch added a coccinelle rule to make sure callers always
use git_hash_init() rather than direct function pointers from the algo
struct.
Let's do the same for the rest of the git_hash_*() wrappers. I split
these out because they're a bit different: they implicitly use the algop
pointer in the git_hash_ctx. So when we convert:
we drop the reference to algo entirely! But this is always going to be
the right thing. If "algo" does not match what is in ctx.algop, then
we'd already be invoking undefined behavior.
So in addition to making it possible to add more logic to the
git_hash_*() functions, we're avoiding the need to pass around the extra
algo pointer and make sure that it matches what's in "ctx".
The rest of the patch is the mechanical application of that coccinelle
patch, plus a minor cleanup in test-synthesize.c to drop a now-unused
function parameter (since we don't have to pass around the algo
separately anymore).
Signed-off-by: Jeff King <redacted> Signed-off-by: Junio C Hamano <redacted>
Jeff King [Wed, 8 Jul 2026 03:52:49 +0000 (23:52 -0400)]
hash: use git_hash_init() consistently
We'd like to add more logic to git_hash_init(), but many callers skip it
and call algop->init_fn() directly. Let's make sure we're consistently
using the wrapper by adding a coccinelle rule.
Besides the coccinelle file itself, this is a purely mechanical
conversion based on the patch it generates. There should be no bare
init_fn() calls left (except for the one in the wrapper).
Signed-off-by: Jeff King <redacted> Signed-off-by: Junio C Hamano <redacted>
The standard philosophy for Unix software when a help option (such as
--help) is specified is that the software should exit 0, printing the
help output to standard output, since the standard output is for
user-requested output and the program performed the requested task
successfully. If the user specifies an incorrect option, then the help
output should be printed to standard error (since the user has made a
mistake) and it should exit unsuccessfully.
Most of our commands currently exit 129 on receiving the -h option to
print the short help, which does not line up with the standard
philosophy above. Let's change that to exit 0 instead.
This requires changes to a variety of tests which previously wanted the
129 exit code, so update them. Note that because git diff does its own
option parsing, it still exits with 129, so update some of the tests to
expect either exit status.
Some commands also now pass with -h but not --help-all, so handle those
cases differently for those commands.
Signed-off-by: brian m. carlson <redacted> Signed-off-by: Junio C Hamano <redacted>
rev-parse: have --parseopt callers exit 0 on --help
The standard philosophy for Unix software when a help option (such as
--help) is specified is that the software should exit 0, printing the
help output to standard output, since the standard output is for
user-requested output and the program performed the requested task
successfully. If the user specifies an incorrect option, then the help
output should be printed to standard error (since the user has made a
mistake) and it should exit unsuccessfully.
git rev-parse --parseopt properly directs the output in both of these
cases, but it currently exits 129 when it receives a --help or -h option
on the command line, which causes its invoking script to do the same.
This is not in line with the usual behavior and it causes scripts using
this command to exit unsuccessfully on --help as well.
Note that Git subcommands implemented using scripts, such as git
submodule, don't have this problem because Git itself intercepts the
--help option and runs man (or a similar tool), which then exits 0.
However, this still affects the myriad scripts that use this
functionality because Git is widespread and the --parseopt functionality
is a good way to get sensible option parsing across shells in a portable
way.
Because git rev-parse --parseopt is intended to be eval'd by the shell,
when help output is to be printed to standard output, Git actually
prints a cat command with a heredoc since the standard output is being
evaluated by the shell. Thus, to do the right thing, simply add an
"exit 0" right after the end of the heredoc, which will cause the
invoking program to exit successfully.
The usual invocation recommended by the manual page is this:
Thus, the fact that git rev-parse --parseopt still exits 129 in this
case is irrelevant, since the "echo exit $?" will print "exit 129", but
that will be after the "exit 0" printed by Git—and thus ignored, since
the shell will have already exited successfully.
Update the tests for this case. Note that we no longer need to delete
only the first and last lines in some tests, so add a command to delete
the end of the heredoc as well. We could do something clever with sed
to delete all but the last two lines or switch to head and tail, but
those would be more complicated and less readable, so just stick with
the simple approach.
In t1517, add three shell scripts to the failure case because they no
longer return 129 as expected. In a future commit, we'll change the
expected result to exit 0 and these will become successful again.
Signed-off-by: brian m. carlson <redacted> Signed-off-by: Junio C Hamano <redacted>
parse-options: add a separate case for help output on error
When we parse a command line option such as -h or --help, we currently
exit 129, since that is the exit code when help output is printed. In a
future commit, we'll change this to exit 0 instead, since we're doing
what the user wanted successfully.
However, there are some cases where we print help output because the
user has provided ambiguous or invalid input, such as an ambiguous
option, and we'll want to exit unsuccessfully there. Make this easier
by defining a new return code, PARSE_OPT_HELP_ERROR, that can be used in
this case, while reserving PARSE_OPT_HELP for those cases where the user
has requested help directly.
Signed-off-by: brian m. carlson <redacted> Signed-off-by: Junio C Hamano <redacted>
The svn tests currently assume that git-svn's option parsing will always
fail the tests because it exits 0 on --help, not 129. However, in a
future commit, we'll expect it to exit 0 and the tests will then need to
be updated to succeed in some cases and fail in others.
We therefore need to have t1517 determine whether the Subversion Perl
modules are present, since if they are not, git-svn will die on start
and then it needs to continue to expect failure. Add a stripped down
version of the tests in t/lib-git-svn.sh as a prerequisite we can use
here for our svn tests.
Signed-off-by: brian m. carlson <redacted> Signed-off-by: Junio C Hamano <redacted>
Mantas Mikulėnas [Wed, 13 May 2026 07:08:03 +0000 (10:08 +0300)]
sideband: allow ANSI SGR with colon-separated subfields
The SGR values used for 256-color formatting are officially defined to
be a single field with :-separated subfields (e.g. "\e[1;38:5:XX;40m")
despite the more common but kludgy use of separate values (which then
become context-dependent and lead to misinterpretation by incompatible
terminals).
Signed-off-by: Mantas Mikulėnas <redacted> Acked-by: Johannes Schindelin <redacted> Signed-off-by: Junio C Hamano <redacted>
In the preceding commit we have removed the last callers of
`set_git_work_tree()` that is located outside of "setup.c". Remove its
declaration and mark the function as file-local.
Signed-off-by: Patrick Steinhardt <redacted> Signed-off-by: Junio C Hamano <redacted>
In the preceding commits we have refactored how we discover and set up
repositories so that we cannot end up with partially-configured repos.
Instead, we apply the gitdir, worktree and repository format in a single
location, only.
Initializing a new repository has the same antipattern though: while
most of the information for the new repository is passed via parameters,
the work tree is instead propagated by configuring the repository's work
tree.
Refactor the code so that we also pass the work tree as an explicit
parameter. Like this, configuration fo the repository happens in a
single spot, too, just as with repository discovery.
Signed-off-by: Patrick Steinhardt <redacted> Signed-off-by: Junio C Hamano <redacted>
setup: drop redundant configuration of `startup_info->have_repository`
In `init_db()` we set `startup_info->have_repository` twice: once before
reading and applying the repository format and once after. This is
redundant though, as configuring the repository format does not rely on
this variable at all.
Remove the first such site. While at it, fix up formatting a bit.
Signed-off-by: Patrick Steinhardt <redacted> Signed-off-by: Junio C Hamano <redacted>
In the preceding commits we have started to propagate all information
required for the configuration of the repository via a new `struct
repo_discovery`. The only exception is the repository's prefix, which we
still return via the return parameter.
This is conceptually fine, but somewhat inconsistent. Refactor this to
instead propagate the prefix via the repository discovery, too.
While at it, drop a static variable in `repo_discover_bare_gitdir()`.
We apply its value to the repository discovery anyway, so we don't have
to keep it around afterwards anymore.
Signed-off-by: Patrick Steinhardt <redacted> Signed-off-by: Junio C Hamano <redacted>
The current working directory is stored as part of a static strbuf
variable. This variable had to have a lifetime longer than its
containing function because the value we return typically points into
that buffer.
In the preceding commit we have moved the prefix into the repository
though. Consequently, we can now return the repository's prefix instead
of the local one and thus properly manage the lifecycle of this local
variable.
Signed-off-by: Patrick Steinhardt <redacted> Signed-off-by: Junio C Hamano <redacted>
The repository prefix is currently stored in the startup info. This
feels somewhat awkward though, as it is inherently a property of a given
repository.
Move the prefix into the repository accordingly.
Signed-off-by: Patrick Steinhardt <redacted> Signed-off-by: Junio C Hamano <redacted>
All functions related to repository discovery receive both a `struct
repository_discovery` and `struct repository_format` as input, and the
expectation is that both will be populated. Refactor this so that the
repository format is part of the discovery result.
Signed-off-by: Patrick Steinhardt <redacted> Signed-off-by: Junio C Hamano <redacted>
When setting up the global repository we intermix repository discovery
and repository configuration: we repeatedly call `set_git_work_tree()`
and `apply_and_export_relative_gitdir()` until we're happy with the
result. The result of this is then a partially-configured repository
that we use for further setup.
This process is quite hard to follow, as it's never quite clear which
parts of the repository have been configured already and which haven't.
Furthermore, it means that the repository configuration is distributed
across many different places instead of having it neatly contained in a
single location. Ultimately, this is the reason that we cannot use a
central function like `repo_init()`.
Refactor the logic so that we stop partially-configuring a repository
and instead populate a new `struct repo_discovery`. This allow us to
essentially split repository setup into two phases:
- The first phase only figures out parameters required to configure
the repository.
- The second phase then takes these parameters and applies them to the
repository.
Like this, we'll never end up with a partially-configured repository and
can eventually extend `repo_init()` to handle the full initialization
for us.
Signed-off-by: Patrick Steinhardt <redacted> Signed-off-by: Junio C Hamano <redacted>
setup: split up concerns of `setup_git_env_internal()`
The function `setup_git_env_internal()` does two completely unrelated
things:
- It configures the repository's gitdir and propagates environment
variables into it.
- It configures a couple of global parameters via environment
variables.
The function is called when we initialize the repository's path, but
it's also called via `chdir_notify_register()` whenever we change the
current working directory. While we indeed have to reconfigure the
gitdir in case it's a relative path, it doesn't make sense to reapply
the global environment variables.
Split up concerns of this function along the above delineation. Handling
of the global environment variables is moved into `init_git()`, as they
can be considered part of our setup procedure.
Signed-off-by: Patrick Steinhardt <redacted> Signed-off-by: Junio C Hamano <redacted>
It is possible to configure an arbitrary "shallow" file via two
mechanisms, and the respective logic to handle these is split across two
locations:
- Via the "GIT_SHALLOW_FILE" environment variable, which is handled in
`setup_git_env_internal()`.
- Via the global "--shallow-file=" command line option, which is
handled in `handle_options()`.
We can rather easily unify this logic by not configuring the shallow
file in `handle_options()`, but instead overwriting the environment
variable. The environment variable itself is then handled inside of
`apply_repository_format()`, which is responsible for configuring a
discovered Git directory.
This new logic is similar in nature to how we handle the other global
options already, all of which end up setting an environment variable.
So for one this gives us more consistency. But more importantly, this
change means that `the_repository` will not contain any relevant state
anymore before we hit `apply_repository_format()` once we're at the end
of this patch series. Consequently, it will become possible for us to
completely discard `the_repository` and populate it anew.
Note that on first sight, this change looks like it might change the
precedence order. Before this change, we used to configure the shallow
file in the arguments handler first, and then it looks like we override
it via the environment variable. What's important to note though is the
last parameter to `set_alternate_shallow_file()`, which tells us whether
we want to overwrite a preexisting value, and when applying the value
from the environment we tell it not to overwrite preexisting values. So
in effect, the command line has precedence over the environment. After
this change, we now overwrite preexisting environment variables when we
see the argument, and consequently we keep the precedence order in tact.
With this change though we don't need the final parameter anymore that
tells `set_alternate_shallow_file()` whether or not to overwrite. We
only have a single callsite for this function now, and that function is
itself only ever called exactly once. Remove that parameter.
Signed-off-by: Patrick Steinhardt <redacted> Signed-off-by: Junio C Hamano <redacted>
setup: mark bogus worktree in `apply_repository_format()`
When a repository is configured to have both "core.worktree" and
"core.bare" we emit a warning and mark the worktree configuration as
bogus so that the next call to `setup_work_tree()` will cause us to die.
This allows us to still use the misconfigured repository, at least as
long as we don't try to use its worktree.
This condition is handled in `setup_explicit_git_dir()`. In a subsequent
commit we'll refactor this function so that it doesn't receive a repo as
input anymore though, and consequently we cannot set the "bogus" bit
anymore.
Move the logic into `apply_repository_format()` instead to prepare for
this. While at it, fix up formatting a bit.
Note that this change requires us to also explicitly unset the value of
"core.worktree" in case we have the "GIT_WORK_TREE" environment variable
set. This is because the environment variable overrides the repository's
configuration, and we don't want to warn or die in case the work tree
has been configured explicitly regardless of whether or not "core.bare"
is set.
Signed-off-by: Patrick Steinhardt <redacted> Signed-off-by: Junio C Hamano <redacted>
The function `check_repository_format_gently()` receives a format as
input. An unknowing reader may thus suspect that this function actually
checks the passed-in format for consistency. While the function indeed
checks the repository format, it actually serves two purposes:
- It reads the repository's format and populates the passed-in format
with that information.
- It then indeed checks whether the format is consistent.
Rename the function to `read_and_verify_repository_format()` to clarify
its functionality. While at it, reorder the parameters so that the
format comes first to better match other functions that pass around the
format.
Signed-off-by: Patrick Steinhardt <redacted> Signed-off-by: Junio C Hamano <redacted>
A test checking interactions between git rebase --quit and
autostash in t3420-rebase-autostash.sh has been corrected to use
test_path_is_missing instead of ! grep on a file that shouldn't
exist in the conflicted state.
* sg/t3420-do-not-grep-in-missing-file:
t3420-rebase-autostash: don't try to grep non-existing files
The connectivity check has been refactored to search for promisor
objects in a generic way using the object database interface,
rather than iterating packfiles directly. This allows connectivity
checks to work properly in repositories that do not use packfiles.
* ps/connected-generic-promisor-checks:
connected: search promisor objects generically
connected: split out promisor-based connectivity check
odb/source-packed: support flags when iterating an object prefix
odb/source-packed: extract logic to skip certain packs
Junio C Hamano [Mon, 6 Jul 2026 22:50:24 +0000 (15:50 -0700)]
Merge branch 'ps/refs-onbranch-fixes'
Reference backend configuration has been updated to load lazily to
avoid recursive calls during repository initialization when 'onbranch'
configuration conditions are evaluated. This has also fixed a memory
leak and allowed the unused `chdir_notify_reparent()` machinery to be
dropped.
* ps/refs-onbranch-fixes:
refs: protect against chicken-and-egg recursion
refs/reftable: lazy-load configuration to fix chicken-and-egg
reftable: split up write options
refs/files: lazy-load configuration to fix chicken-and-egg
refs: move parsing of "core.logAllRefUpdates" back into ref stores
repository: free main reference database
chdir-notify: drop unused `chdir_notify_reparent()`
refs: unregister reference stores from "chdir_notify"
setup: don't apply "GIT_REFERENCE_BACKEND" without a repository
setup: stop applying repository format twice
setup: inline `check_and_apply_repository_format()`
Junio C Hamano [Mon, 6 Jul 2026 22:50:23 +0000 (15:50 -0700)]
Merge branch 'wy/doc-clarify-review-replies'
Documentation on community contribution guidelines has been updated to
encourage replying to review comments before rerolling, and to advise
a default limit of at most one reroll per day to give reviewers across
different time zones enough time to participate.
Junio C Hamano [Mon, 6 Jul 2026 22:50:23 +0000 (15:50 -0700)]
Merge branch 'jk/repo-info-path-keys'
The "git repo info" command has been taught new keys to output both
absolute and relative paths for "gitdir" and "commondir", supported by
a new path-formatting helper extracted from "git rev-parse".
* jk/repo-info-path-keys:
repo: add path.gitdir with absolute and relative suffix formatting
repo: add path.commondir with absolute and relative suffix formatting
path: extract format_path() and use in rev-parse
Junio C Hamano [Mon, 6 Jul 2026 22:50:23 +0000 (15:50 -0700)]
Merge branch 'mv/log-follow-mergy'
"git log --follow" has been updated to better handle non-linear
history, in which the path being tracked gets renamed differently in
multiple history lines.
* mv/log-follow-mergy:
log: improve --follow following renames for non-linear history
Junio C Hamano [Mon, 6 Jul 2026 22:50:23 +0000 (15:50 -0700)]
Merge branch 'pw/status-rebase-todo'
The display of the rebase todo list in "git status" has been
improved to correctly abbreviate object IDs for more commands and
avoid misinterpreting refs as object IDs.
* pw/status-rebase-todo:
status: improve rebase todo list parsing
sequencer: factor out parsing of todo commands
The pack-objects command has been updated to support reachability
bitmaps and delta-islands concurrently with the `--path-walk` option,
allowing faster packaging by falling back to path-walk when bitmaps
cannot fully satisfy the request.
* tb/pack-path-walk-bitmap-delta-islands:
pack-objects: support `--delta-islands` with `--path-walk`
pack-objects: extract `record_tree_depth()` helper
pack-objects: support reachability bitmaps with `--path-walk`
t/perf: drop p5311's lookup-table permutation
The documentation in SubmittingPatches has been updated to clarify how
patch contributors should respond to design and viability critiques,
and how the resolution of such critiques should be recorded in the
final commit messages.
Junio C Hamano [Mon, 6 Jul 2026 22:50:22 +0000 (15:50 -0700)]
Merge branch 'kh/submittingpatches-trailers'
The trailer sections in SubmittingPatches have been updated to
encourage use of standard trailers.
* kh/submittingpatches-trailers:
SubmittingPatches: note that trailer order matters
SubmittingPatches: be consistent with trailer markup
SubmittingPatches: document Based-on-patch-by trailer
SubmittingPatches: discourage common Linux trailers
SubmittingPatches: encourage trailer use for substantial help
Junio C Hamano [Mon, 6 Jul 2026 22:50:21 +0000 (15:50 -0700)]
Merge branch 'po/hash-object-size-t'
Support for hashing loose or packed objects larger than 4GB on Windows
and other LLP64 platforms has been improved by converting object header
buffers and data-handling functions from 'unsigned long' to 'size_t'.
* po/hash-object-size-t:
hash-object: add a >4GB/LLP64 test case using filtered input
hash-object: add another >4GB/LLP64 test case
hash-object --stdin: verify that it works with >4GB/LLP64
hash algorithms: use size_t for section lengths
object-file.c: use size_t for header lengths
hash-object: demonstrate a >4GB/LLP64 problem
Junio C Hamano [Mon, 6 Jul 2026 22:50:21 +0000 (15:50 -0700)]
Merge branch 'ty/move-protect-hfs-ntfs'
The global configuration variables protect_hfs and protect_ntfs have
been migrated into struct repo_config_values to tie them to
per-repository configuration state.
* ty/move-protect-hfs-ntfs:
environment: use 'repo->initialized' for repo_protect_hfs() and repo_protect_ntfs()
environment: move 'protect_hfs' and 'protect_ntfs' into 'repo_config_values'
Junio C Hamano [Mon, 6 Jul 2026 22:50:21 +0000 (15:50 -0700)]
Merge branch 'ps/odb-source-packed'
The packed object source has been refactored into a proper struct
odb_source.
* ps/odb-source-packed:
odb/source-packed: drop pointer to "files" parent source
midx: refactor interfaces to work on "packed" source
odb/source-packed: stub out remaining functions
odb/source-packed: wire up `freshen_object()` callback
odb/source-packed: wire up `find_abbrev_len()` callback
odb/source-packed: wire up `count_objects()` callback
odb/source-packed: wire up `for_each_object()` callback
odb/source-packed: wire up `read_object_stream()` callback
odb/source-packed: wire up `read_object_info()` callback
packfile: use higher-level interface to implement `has_object_pack()`
odb/source-packed: wire up `reprepare()` callback
odb/source-packed: wire up `close()` callback
odb/source-packed: start converting to a proper `struct odb_source`
odb/source-packed: store pointer to "files" instead of generic source
packfile: move packed source into "odb/" subsystem
packfile: split out packfile list logic
packfile: rename `struct packfile_store` to `odb_source_packed`
Commands that list branches and tags (like git branch and git tag)
have been optimized to pass the namespace prefix when initializing
their ref iterator, avoiding a loose-ref scaling regression in
repositories with many unrelated loose references.
The 'ort' merge backend has been hardened against corrupt trees by
ensuring it aborts under appropriate error conditions.
* en/ort-harden-against-corrupt-trees:
cache-tree: fix verify_cache() to catch non-adjacent D/F conflicts
merge-ort: abort merge when trees have duplicate entries
merge-ort: free diff pairs queue in clear_or_reinit_internal_opts()
merge-ort: drop unnecessary show_all_errors from collect_merge_info()
merge-ort: propagate callback errors from traverse_trees_wrapper()
git.99rst.org / git.git / log