Rafał Miłecki [Thu, 30 Nov 2017 10:04:53 +0000 (11:04 +0100)]
rpcd-mod-lxc: info: return NOT_FOUND if container doesn't exist
It allow distinction between not existing and stopped container. So far
querying for not existing container was resulting in:
> ubus call lxc info '{ "name": "foo" }'
{
"name": "foo",
"state": "STOPPED",
"ips": [
]
}
Now it's an error and it matches lxc-info command line:
> ubus call lxc info '{ "name": "foo" }'
Command failed: Not found
Thomas Huehn [Thu, 30 Nov 2017 18:52:34 +0000 (19:52 +0100)]
collectd: upgrade package collectd to version 5.8.0
This patch upgrades the collectd package from 5.7.2 to 5.8.2.
All openwrt patches got either updated or deleted in case they
are already included into upstream collectd.
The new collectd 5.8.0 package compiles and got tested on current
lede trunk with latest luci on an PCengines APU. All default plugins
(enabled via Openwrt Makefile) - so also iwinfo - are running fine
with the new version.
Signed-off-by: Thomas Huehn <redacted>
Amended with the following changes:
* preserve git file history by avoiding unnecessary patch renames
* mark new plugins introduced with 5.8 branch as disabled
Gavin Ni [Tue, 28 Nov 2017 07:04:31 +0000 (15:04 +0800)]
openconnect: support reading password from script
"token_mode" add support for "script", which execute "token_script" to
get the password. Some token is not supported by OpenConnect natively,
e.g. "MobilePass" or "Softoken II" used in Cisco VPN
Signed-off-by: Gavin Ni <redacted> Signed-off-by: Yousong Zhou <redacted>
Dirk Brenken [Sat, 2 Dec 2017 17:39:03 +0000 (18:39 +0100)]
adblock: update 3.1.1
* new function to set/delete options in external uci config files
* kresd: automated 'rpz_file' handling in /etc/config/resolver
* firewall: automated 'force_dns' handling if you
enable or disable adblock
* support sha256sum (default) and md5sum for blocklist
comparison & conditional dns restarts
* cosmetics
build,travis: build only last commit in a branch build
This started out as me trying to fix my Python build
in a local Travis CI env.
After 40+ minutes, the build still did not stop:
https://travis-ci.org/commodo/packages/builds/310413628
There is a bug, where the `.travis_do.sh` script does exit early,
and enters an endless loop, when doing a branch build.
It tries to continuously fetch 50 more revisions.
So, I decided to add some limited support for branch builds.
This also allows a simpler testing with Travis before
opening a PR.
This scope of testing is limited to whatever the last
commit touches, but it's still better than nothing.
When libpam is selected, then mod_imap pulls in a dep to libpam,
and there seems no way to disable it via configure arguments.
So add this dep here conditionally.
Signed-off-by: Lucian Cristian <redacted> Signed-off-by: Michael Heimpold <redacted>
Hans Dedecker [Thu, 30 Nov 2017 13:57:51 +0000 (14:57 +0100)]
gstreamer: bump to 1.10.5
Update gstreamer to the 1.10 stable branch; select latest stable 1.10.5
See https://gstreamer.freedesktop.org/releases/1.10/ for major new features
and bugfixes
Daniel Golle [Tue, 28 Nov 2017 02:22:57 +0000 (03:22 +0100)]
auc: update to version 0.0.8
* fix multiple read_data_cb calls from uclient, otherwise hickups
happend when receiving a large JSON reply
* add minimal help message (-h)
* pretify package update output
* fix infinite retry of upgrade-check which happened in some cases
* add sleep in case of check-request retry
* lots of cosmetics
Val Kulkov [Tue, 28 Nov 2017 07:00:42 +0000 (02:00 -0500)]
pigeonhole: fix runtime dependency on dovecot's ABI
Closes #5062. With ABI_VERSION declaration in dovecot's Makefile
introduced in PR #5182, pigeonhole plugin will now be rebuilt on every
dovecot upgrade. To announce the rebuilt pigeonhole plugin to opkg,
introduce a different model of version numbering. The new version
numbering now includes both dovecot and pigeonhole plugin version
numbers. Therefore, the rebuilt pigeonhole plugin will be visible to
opkg whenever dovecot or pigeonhole plugin version changes.
Rename "pigeonhole" to "dovecot-pigeonhole". There are several reasons
for renaming the package:
1. pigeonhole is a plugin. There seems to be a convention to name
plugins by adding corresponding suffixes to the parent package name,
such as lua-*, luci-*, php7-mod-*, perlbase-*, transmission-* etc.
2. When named as "dovecot-pigeonhole", the pigeonhole plugin is
displayed right next to dovecot in config manager ("make menuconfig")
and is therefore highly visible to anyone who explores the available
modules for dovecot.
3. When named as "dovecot-pigeonhole", the package version number
consisting of both dovecot and pigeonhole version numbers makes more
sense: "dovecot-pigeonhole_2.2.33.2-0.4.20-2" looks more comprehensible
than "pigeonhole_2.2.33.2-0.4.20-2", however admittedly both variants
look rather ugly.
Add ManageSieve to the package. Adding managesieve-login and its
libraries increases the size of the package by about 11% from 702061
bytes to 781294 bytes on the bcm53xx platform. As dovecot is unlikely
to be used on a low-end LEDE/OpenWrt box, the addition of ~80KB to
the package size is not likely to make a noticeable difference but it
will add the capability to use pigeonhole plugin for dovecot with
systems that talk ManageSieve, such as the RoundCube.
Val Kulkov [Tue, 28 Nov 2017 05:50:43 +0000 (00:50 -0500)]
dovecot: prepare for runtime dependency by plugins
Add ABI_VERSION declaration in order to tell dovecot plugins that are
runtime-dependent on dovecot's Application Binary Interface (ABI)
version, such as the pigeonhole mail filter, that they need to be
rebuilt each time the dovecot's ABI version changes.
This PR is not yet closing issue #5062. A forthcoming PR for pigeonhole
package will close the issue.
Introduce a new configuration parameter to enable ICU (i18n) support.
Make the ICU disabled by default.
Introduce PKG_CONFIG_DEPENDS with the list of configuration parameters
triggering rebuild of dovecot.
Declare the conffiles section to save dovecot's configuration files and
its init.d script on sysupgrade.
Introduce a new package, dovecot-utils, to contain doveadm and dsync
utilities: closes #4912.
Correct the destination directory for the installation of
example-config files. At present, the example files are installed into
/usr/share/doc/dovecot/example-config/example-config.
Michael Heimpold [Sun, 26 Nov 2017 20:58:30 +0000 (21:58 +0100)]
php7: try to fix compilation on LEDE buildbots
Detection of U8T_DECOMPOSE seems to be broken when cross-compiling,
so needs to be preseeded.
-snip-
checking for utf8_mime2text signature... new
checking for U8T_DECOMPOSE...
configure: error: utf8_mime2text() has new signature, but U8T_CANONICAL
is missing. This should not happen. Check config.log for additional information.
-snap-
This requires also a patch for PHP to make the preseeding working.
Hannu Nyman [Sun, 26 Nov 2017 16:53:45 +0000 (18:53 +0200)]
haveged: update to 1.9.2
Update haveged to 1.9.2
Release notes:
http://www.issihosts.com/haveged/downloads.html
Version 1.9.2
I am no longer active as a developer but have decided to push out
contributor fixes I have accumulated since the last release. Two
oustanding bugs are not addressed: 1) Failure to build on IA64 due
to busted cpuid and 2) Incorrect exit status when terminate by signal.
Jo-Philipp Wich [Thu, 23 Nov 2017 19:47:59 +0000 (20:47 +0100)]
polipo: forcibly enable IPv6 support
Currently `polipo.h` uses the conditional
`(__GLIBC__ > 2) || (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 2)` to decide
whether to enable IPv6 support.
This used to work for OpenWrt CC which uses uClibc disguising itself
as Glibc 2.x but it does not work with Musl libc anymore as this library
does not export any Glibc defines.
Forcibly enable IPv6 support by passing `-DHAVE_IPv6` unconditionally
through the build flags in the OpenWrt/LEDE Makefile.
Daniel Golle [Tue, 21 Nov 2017 16:17:25 +0000 (17:17 +0100)]
auc: update to version 0.0.4
* implement '-d' cmdline option to output json requests
* switch to new server API
* implement upgrade_packages
Read upgrade_packages UCI option and ask for either only release
upgrades or also builds based on updated packages depending on whether
upgrade_packages is '0' or '1'.
Rosen Penev [Wed, 22 Nov 2017 02:02:40 +0000 (18:02 -0800)]
transmission: Update to latest git and fix syslog.
The init script runs transmission with the foreground parameter for procd to control it. However, if transmission is ran in the foreground, nothing is logged to syslog. Added a patch to remove this restriction.
Also added a sysctl file that removes these warnings:
UDP Failed to set receive buffer: requested 4194304, got 262142 (tr-udp.c:75)
UDP Please add the line "net.core.rmem_max = 4194304" to /etc/sysctl.conf (tr-udp.c:80)
UDP Failed to set send buffer: requested 1048576, got 262142 (tr-udp.c:86)
UDP Please add the line "net.core.wmem_max = 1048576" to /etc/sysctl.conf (tr-udp.c:91)
Yousong Zhou [Tue, 21 Nov 2017 09:04:51 +0000 (17:04 +0800)]
shadowsocks-libev: bump to version 3.1.1
Notable changes since 3.1.0
26ae365: fix possible socks5 exchange corruption caused by bad
state transition when parsing responses f19a96e: fix segfault when presented with config {"mode": null}
Val Kulkov [Mon, 20 Nov 2017 20:42:18 +0000 (15:42 -0500)]
libfreetype: restore host build
Restore host building on request from a user. Apparently, packages
outside of openwrt/packages feed rely on Freetype 2 building on host.
While at it, remove sed-editing of freetype-config that is no longer
necessary. The current version of freetype-config correctly identifies
prefix, exec_prefix, includedir and libdir.
git.99rst.org / openwrt-packages.git / log