Jeffery To [Tue, 23 May 2023 09:49:43 +0000 (17:49 +0800)]
python3: Fix multiarch/local paths added when building host Python
By default, the Python build process will add /usr/local/{lib,include},
and multiarch paths (e.g. /usr/{lib,include}/x86_64-linux-gnu) if
building on Debian/Ubuntu, to its library and includes paths.
006-do-not-add-multiarch-paths-when-cross-compiling.patch was added in 0c8b0b0bf727a57b0138a1425d2f32786dddd146 to stop the Python build
process from adding these paths for target Python.
These paths are still added by the Python build process when building
host Python.
This replaces the cross-compiling-only patch with the original patch,
renamed slightly and adapted for Python 3.10.
Fixes: 48277ec91581 ("python3: bump to version 3.8") Signed-off-by: Jeffery To <redacted>
Jeffery To [Sat, 20 May 2023 11:07:22 +0000 (19:07 +0800)]
python3: Fix race condition when doing parallel builds
When doing parallel builds, host Python can install the python3 symlink
before the Python standard library is installed completely.
When this occurs, it is possible for other packages to detect the
python3 symlink and try to use host Python before it is fully installed.
This adds a patch to make commoninstall (where the standard library is
installed) a prerequisite of bininstall (where the python3 symlink is
installed), so that commoninstall is fully completed before bininstall
begins.
Patch has been submitted upstream:
https://github.com/python/cpython/pull/104693
Fixes: https://github.com/openwrt/packages/issues/19241 Signed-off-by: Jeffery To <redacted>
Without setting READELF, configure finds the symlink to
$(TARGET_CROSS)readelf (e.g. arm-openwrt-linux-readelf) instead of
$(TARGET_CROSS)readelf (e.g. arm-openwrt-linux-muslgnueabi-readelf).
This leads to the symlink name being saved to _sysconfigdata.py, and so
the readelf name is not replaced correctly (in
Py3Package/python3-base/install).
This restores the removed Makefile lines.
Fixes: 4e05541782ed ("python3: bump to version 3.10.0") Signed-off-by: Jeffery To <redacted>
Jeffery To [Fri, 12 May 2023 11:40:11 +0000 (19:40 +0800)]
python3: Fix __pycache__ files included in python3-light
003-do-not-run-distutils-tests.patch was removed in 4e05541782edeb06b51d691dadf52648df24c940. This patch stopped "make
install" from, among other things, running compileall.
When this patch was removed, "make install" ran compileall as normal and
created bytecode files in __pycache__ directories. These files were then
packaged in python3-light.
This adds a patch to stop compileall from being run during "make
install".
Fixes: 4e05541782ed ("python3: bump to version 3.10.0") Signed-off-by: Jeffery To <redacted>
Tianling Shen [Mon, 22 May 2023 04:29:27 +0000 (12:29 +0800)]
xfsprogs: Update to 6.2.0
* Added new dependencies introduced in this version
* Disabled mips16 due to build issues
* Fixed the usage of the `CONFIG_USE_MUSL` variable (missing $)
* Refreshed patches
Florian Eckert [Tue, 23 May 2023 06:30:06 +0000 (08:30 +0200)]
lcd4linux: fix build error for custom build
This change fixes the following build error:
hecking that generated files are newer than configure... done
configure: error: conditional "ANSICXX" was never defined.
Usually this means the macro was only invoked conditionally.
make[2]: *** [Makefile:300:
/home/feckert/openwrt/build_dir/target-x86_64_musl/lcd4linux-custom/lcd4linux-2019-07-19-0b83bb3a/.configured_a17fb5ef857664f03cd0ce37cc5ea591]
Error 1
make[2]: Leaving directory
'/home/feckert/feeds/packages/utils/lcd4linux'
time: package/feeds/packages/lcd4linux/custom/compile#15.43#0.79#16.92
ERROR: package/feeds/packages/lcd4linux failed to build (build
variant: custom).
make[1]: *** [package/Makefile:120:
package/feeds/packages/lcd4linux/compile] Error 1
make[1]: Leaving directory
'/home/feckert/openwrt'
make: ***
[/home/feckert/openwrt/include/toplevel.mk:231:
package/feeds/packages/lcd4linux/compile] Error 2
nginx: introduce migration for old uci conf template
Introduce support for migration of old uci conf template to new version.
Uci conf template are saved in config backup. This cause problem on config
restore as old config template might have compatibility problem with new
nginx implementation.
Add logic to migrate the template script at runtime to correctly align
to latest change from nginx and nginx-util.
Fixes: 65a676ed56fb ("nginx: introduce support for dynamic modules") Fixes: #20904 Signed-off-by: Christian Marangi <redacted>
Add versioning to UCI conf template as a commented version.
This permits the introduction of migration script since the template is
saved and restored config restore. The migration script are handled by
nginx init.d script.
Michal Hrusecky [Mon, 15 May 2023 12:30:29 +0000 (14:30 +0200)]
openvpn: Add more hotplug events
OpenVPN supports more hooks than just 'up' and 'down'. Especially
reacting to 'route-up' and 'route-pre-down' events could be important.
When routing table changes, it can make sense to adapt firewall, run
some tests or change even more routes. This change passes those events
to hotplug, so it is easy to react to them without changing
configuration files provided by VPN provider.
Michael Heimpold [Fri, 19 May 2023 11:51:13 +0000 (13:51 +0200)]
evtest: don't build man page
Just selecting this package resulted in a build error:
/home/mhei/openwrt.git/staging_dir/hostpkg/bin/python3: No module named asciidoc
make[4]: *** [Makefile:856: evtest.xml] Error 1
Since we usually do not need the man page, just prevent to
build it by pre-setting two environments variables. Then
the makefile warns about, but don't try to build.
Tianling Shen [Fri, 19 May 2023 07:42:22 +0000 (15:42 +0800)]
gnutls: fix build with zabbix
Zabbix verifies the version of gnutls by search in the header gnutls.h.
This is done with 'cat' and 'egrep'. The problem here is now that the
preprocess definition did changed in gnutls.h, so the regex does not
match anymore.
The following error message acourse in the log:
> configure: error: GnuTLS library version requirement not met (>= 3.1.18)
To fix this backport an upstream patch to let the regex work again.
Jeffery To [Fri, 19 May 2023 12:03:43 +0000 (20:03 +0800)]
gensio: Fix build on build host with Go compiler
If the build host has the Go compiler installed, then configure will
detect this and will try to compile gensio's Go support, leading to a
build failure.
This disables Go support entirely to fix this build failure.
Michael Heimpold [Mon, 15 May 2023 06:32:28 +0000 (08:32 +0200)]
php8: fix compilation with musl 1.2.4
As noted in the release notes of musl 1.2.4, we can use
CFLAGS to pass -D_LARGEFILE64_SOURCE to allow to keep
using LFS64 definitions (as a short-term solution).
Nick Hainke [Tue, 16 May 2023 21:41:26 +0000 (23:41 +0200)]
inotify-tools: fix compilation with musl 1.2.4
Fixes errors in the form of:
inotifytools.c: In function 'inotifytools_watch_recursively_with_exclude':
inotifytools.c:1335:30: error: storage size of 'my_stat' isn't known
1335 | static struct stat64 my_stat;
| ^~~~~~~
inotifytools.c:1342:36: error: implicit declaration of function 'lstat64'; did you mean 'lstat'? [-Werror=implicit-function-declaration]
1342 | if ( -1 == lstat64( next_file, &my_stat ) ) {
| ^~~~~~~
| lstat
inotifytools.c:1335:30: error: unused variable 'my_stat' [-Werror=unused-variable]
1335 | static struct stat64 my_stat;
| ^~~~~~~
inotifytools.c: In function 'isdir':
inotifytools.c:1621:30: error: storage size of 'my_stat' isn't known
1621 | static struct stat64 my_stat;
| ^~~~~~~
inotifytools.c:1621:30: error: unused variable 'my_stat' [-Werror=unused-variable]
inotifytools.c:1630:1: error: control reaches end of non-void function [-Werror=return-type]
1630 | }
| ^
cc1: all warnings being treated as errors
Darren Tucker [Thu, 11 May 2023 06:33:31 +0000 (16:33 +1000)]
openssh: sftp no longer needs crypto or zlib.
OpenSSH 9.1p1 removed remaining dependencies and stopped linking sftp,
sftp-server and scp against libcrypto or libz. This change moves those
package dependencies from the default to those that still need them.
In particular, this will allow sftp-server to be installed for use with
Dropbear without needing to install zlib or openssl.
git.99rst.org / openwrt-packages.git / log