Jo-Philipp Wich [Fri, 16 Dec 2016 01:22:41 +0000 (02:22 +0100)]
python: move includes after common package variables
Move the python-host.mk and python-package.mk includes after the definition of
common package variables. This is required to ensure that PKG_UNPACK is not set
to to the dummy "true" command which happens if PKG_SOURCE is not yet set.
Fixes the following error observed while attempting to build Python on a recent
LEDE version:
Applying ./patches/001-enable-zlib.patch using plaintext:
can't find file to patch at input line 14
Perhaps you used the wrong -p or --strip option?
[...]
Patch failed! Please fix ./patches/001-enable-zlib.patch!
Makefile:242: recipe for target '.../Python-2.7.12/.prepared_...' failed
These changes are a direct copy of [1]. The original commit
messages were:
> commit 0a6411b56b9edeba1809ffe45c03dbb7261bf45c
> Author: Matthias Schiffer <redacted>
> Date: Sun May 8 11:39:22 2016 +0200
>
> ecdsautils: update to current git, add libecdsautil
>
> The addition of libecdsautil required us to switch from statically
> linked libuecc to a shared library (as we also want shared
> libecdsautil).
Yousong Zhou [Tue, 6 Dec 2016 06:52:37 +0000 (14:52 +0800)]
qemu: packaging target {x86_64,arm}-softmmu and friends
At the moment, only build these softmmu emulators for x86_64 and sunxi
target. The decision was made for the following reasons
- It seems that interests of virtualization with qemu are mostly from
x86, and ARM recently.
- x86, sunxi boards/boxes capable of running qemu with accel=kvm are more
widely available
- Not all host, target combinations of qemu works, or even compiles
- Extra maintenance work and server resources
Test results are as the following
- Nested vmx works: lede-qemu-x86_64-kvm on lede-qemu-x86_64-kvm
- KVM on Cubieboard2 works
- tcg with malta works: lede-qemu-malta-tcg on lede-qemu-malta-tcg.
But it's too slow to be useful thus not included in this version
- mips64 host does not compile
modified Makefile to:
- stop service before install when updating reported at http://forum.lede-project.org/t/ddns-scripts-upgrade-issue/456/1
- run uci-defaults for all packages
- modify services files only on new installation
still some commands already covered by default_postinst() etc. but they are in there for backward compatibilty.
ocserv: Add libev prefix to stop configure stage failure
This version of ocserv needs us to explicitly specify the prefix
for libev. Add a --with-libev-prefix parameter to make the
configure stage to get the right library.
Eric Luehrsen [Thu, 8 Dec 2016 03:07:08 +0000 (22:07 -0500)]
Unbound: fix regression of manual conf for power user
- History: prior to package 1.5.10-3 /var/lib/unbound was not used
- History: prior to package 1.5.10-4 no UCI scripts were provided
- Problem: UCI 'option manual_conf 1' only copied unbound.conf and root.key
- Problem: power users that had complex file nests cannot use this
- Fix: README.md includes instructions for /var/lib/unbound jail
- Fix: unbound.sh copies ALL of /etc/unbound for 'option manual_conf 1'
p-wassi [Sun, 4 Dec 2016 07:37:37 +0000 (08:37 +0100)]
mail/mutt: update to 1.7.2
Update mutt to upstream release 1.7.2
Also introduce a patch for CVE-2014-9116, which addresses
a DoS-attack. The patch is originally found at Debian's
package of mutt 1.7.1
- tld_names.dat.gz
- rename to public_suffix_list.dat.gz
- (re)created during build
- new location /usr/share
- move services files to /etc/ddns
- new services
- CloudFlare.com-v4 using API-Version 4 without using public_suffix_list.dat
- GoDaddy.com
- both depending on cURL package
- both with modified syntax for option domain ( NEW: [host[.subdom]@]domain.tld )
- new service
- Now-DNS.com formerly Now-IP.com
- service afraid.org now supports key-auth and basic-auth
- new command line options for dynamic_dns_updater.sh and dynamic_dns_updater.sh
- adapted ddns.init and ddns.hotplug to new command line options
- renaming config options inside section global
Jonas Gorski [Sat, 3 Dec 2016 16:48:08 +0000 (17:48 +0100)]
znc: allow running without modules
Now that we don't ship any modules by default, znc might be started
without any modules. Unfortunately znc refuses to start without any
modules, so patch out the appropriate check.
Eric Luehrsen [Fri, 28 Oct 2016 02:04:00 +0000 (22:04 -0400)]
Unbound: Update scripts to build conf file from UCI
-unbound.sh implements the majority of requirements in README.md
-rootzone.sh reloads a small subset for alternate trigger maintenance
-unbound.init sets procd triggers on Unbound and dnsmasq (dhcp) UCI
-two part commit squashed with Makefile included
Eric Luehrsen [Fri, 28 Oct 2016 02:03:00 +0000 (22:03 -0400)]
Unbound: Add files to enable forward link to dnsmasq
-dnsmasq really provides nice local DHCP-DNS records
-Unbound host records would be clumsy to update
-Unbound can be configured to forward to dnsmasq
-iptools provided to facilitate PTR records
-flexible ipv6 colon notation is a bit complex
Eric Luehrsen [Fri, 28 Oct 2016 02:01:00 +0000 (22:01 -0400)]
Unbound: Add hotplug/ntp script to request restart
-DNSSEC needs time, time needs ntp, or power off RTC
-Many consumer routers are cost thrifted without RTC
-Conf "val-override-date: -1" disables time inside DNSSEC
-Need restart as option is not dynamically switchable
-hotplug/ntp is used to set file /var/lib/unbound/unbound.time
-UCI will add or remove option depending on flag-like-file
Stijn Tintel [Tue, 29 Nov 2016 11:26:05 +0000 (12:26 +0100)]
bind: disable libjson support
If libjson-c is detected during bind-libs configure phase, bind-libs
will be built with libjson support. This results in a missing dependency
error during install phase. Solve this by disabling libjson support.
python-setuptools: fix path creation in setup scripts
This was fixed a few versions back.
But then python-setuptools changed.
The problem is that python scripts installed via setuptools
& pip would have `#!/build_dir_path/staging_dir/target-x86_64_musl-1.1.15/host/bin/python`
as the path in the script, rather than the path on the target (`/usr/bin/python`).
git.99rst.org / openwrt-packages.git / log