On master, updater help and missing-option text still refer to '-N'.
Use '-S' instead so the messages match accepted script options.
Also clarify that SECTION is the UCI section name/id to start.
This is a text-only change; runtime behavior is unchanged.
Changelog:
- Add UCM profiles for DualSense PS5 controller and multiple Qualcomm
platforms
- Improve USB audio device handling and HDA initialization patterns
- Enhance phantom jack detection and optional headphone output handling
- Add support for Steinberg audio devices and new MediaTek SoC configs
Changelog:
- Update to Unicode 15.1.0 standard with U+19DA marked DISALLOWED
- Switch from gnulib submodule to GNULIB_REVISION for build management
- Fix uninitialized memory and compiler warnings
- Improve reproducibility and cross-platform build compatibility
Changelog:
- Fix uninitialized value bug in idna_to_unicode_4z4z on malloc failure
- Restore Unicode table generation scripts for modern Perl compatibility
- Fix Windows/musl compatibility for version checking
- Achieve reproducible builds across tested platforms
Dirk Brenken [Mon, 4 May 2026 17:42:14 +0000 (19:42 +0200)]
banip: update 1.8.8-2
- optimized pidfile handling in the init file
- small cornercase fixes & improvements
- drop deprecated 'drop' feed (replaced by 'spamhaus' json feed with the same content)
- LuCI: expose the new JSON Lines Format in the feed editor
- readme update
FindLuaJIT.cmake uses NO_DEFAULT_PATH and only searches hardcoded
luajit-specific paths, so it never finds regular Lua. However if
LUAJIT_INCLUDE_DIRS and LUAJIT_LIBRARY are pre-set in the CMake
cache, find_path/find_library skip their searches, the module sets
LUAJIT_FOUND=ON and also sets LUA_INCLUDE_DIR/LUA_LIBRARIES from
those values, and the if(NOT LUAJIT_FOUND) guard skips the broken
find_package(Lua REQUIRED) call that fails under CMake 4.3.
George Sapkin [Mon, 10 Nov 2025 16:14:03 +0000 (18:14 +0200)]
ci: mark and close PRs with formality issues
Add a recurring workflow that runs every day at 5:30 and marks all PRs
that have formality check failures (i.e. marked as 'not following
guidelines') that have not been active in the past 14 days as stale.
Close stale PRs after 14 more days.
libquadmath is only packaged for x86 and powerpc targets in OpenWrt.
Declaring it as an unconditional runtime dependency of boost-charconv
causes apk installation failure on all other architectures (e.g.
i386, arm, mips) with "libquadmath (no such package)".
Guard the dependency with an ARCH filter so it is only pulled in on
platforms where the package actually exists.
Signed-off-by: Alexandru Ardelean <redacted>
boost: add x86 to libquadmath arch conditional in boost-charconv
libquadmath is available on x86 (i386) in addition to x86_64 and
powerpc variants. Include it in the filter so boost-charconv gets
the correct dependency on 32-bit x86 targets.
boost::asio::post() without an explicit executor fails to compile with
Boost >= 1.82 due to changes in the executor model: bare lambdas no
longer have an implicit system executor that satisfies the
blocking.never requirement.
Pass io_context_ explicitly as the first argument so the handler is
dispatched on the correct io_context thread, which is the original
intent of the call (making stop() safe to call from any thread).
Add test.sh
domoticz is a daemon requiring a database and network port; it does not
implement a --version flag. Verify the binary is present and executable.
Disable LTO to fix link failure on i386 with musl fortify
Suggested via https://github.com/openwrt/packages/pull/29239
Also tested.
Bump to latest upstream snapshot (2025-11-05). re2 uses date-based
versioning from git. This brings roughly two years of upstream
improvements including performance optimisations, bug fixes, and
C++17/20 compatibility improvements.
This commit was merged into the master branch by accident
and should be undone. Adding ujail as a hardcoded dependency
is incorrect, as ujail is meant to be an optional dependency.
A better approach is to implement ujail support within
the init script, which was discussed in the pull request
(https://github.com/openwrt/packages/pull/29277),
consistent with how other packages in the repository handle this.
Ernestas Kulik [Fri, 1 May 2026 08:59:47 +0000 (11:59 +0300)]
libgpiod: add python-setuptools host build dep
If python3-gpiod is enabled and the python-setuptools host package is
missing, the setuptools.build_meta import will cause a build failure.
Fix this by adding a conditional build dependency.
The python3-light dependency gets lugged even with the package disabled,
so this commit makes python3-light a conditional dependency, similar to
gensio in 0c245fda70d580737ee30cc39d42bcca6ddd7f3e.
Russell Senior [Mon, 27 Apr 2026 09:13:52 +0000 (02:13 -0700)]
sed: update to v4.10
update to version v4.10, disable building gnulib-tests to avoid
compilation errors.
Add --disable-xattr to CONFIGURE_ARGS to avoid linking an unneeded
dependency.
Changes in sed since v4.9, from NEWS:
** Bug fixes
sed 's/a/b/g' (and other global substitutions) now works on input
lines longer than 2GB. Previously, matches beyond the 2^31 byte offset
would evoke a "panic" (exit 4).
[bug present since the beginning]
'sed --follow-symlinks -i' no longer has a TOCTOU race that could let
an attacker swap a symlink between resolution and open, causing sed to
read attacker-chosen content and write it to the original target.
[bug introduced in sed 4.1e]
sed no longer falsely matches when back-references are combined with
optional groups (.?) and the $ anchor. For example, this no longer
falsely matches the empty string at beginning of line:
$ echo ab | sed -E 's/^(.?)(.?).?\2\1$/X/'
Xab
[bug present since "the beginning"]
In --posix mode, sed no longer mishandles backslash escapes (\n,
\t, \a, etc.) after a named character class like [[:alpha:]].
For example, 's/^A\n[[:alpha:]]\n*/XXX/' would fail to match the
trailing newline, treating \n as a literal backslash and an 'n'
rather than a newline. This happened when an earlier backslash
escape in the same regex had already been converted, shifting the
in-place normalization buffer.
[bug introduced in sed 4.9]
sed --debug no longer crashes when a label (":") command is compiled
before the --debug option is processed, e.g., sed -f<(...) --debug.
[bug introduced in sed 4.7 with --debug]
sed no longer rejects the documented GNU extension 'a**' (equivalent
to 'a*') in Basic Regular Expression (BRE) mode. Previously, this
worked only with -E (ERE mode), even though grep has always accepted
it in BRE mode.
[bug present since "the beginning"]
sed no longer rejects "\c[" in regular expressions
[bug present since the beginning]
'sed --follow-symlinks -i' no longer mishandles an operand that is a
short symbolic link to a long symbolic link to a file.
[bug introduced in sed 4.9]
Fix some some longstanding but unlikely integer overflows.
Internally, 'sed' now more often prefers signed integer arithmetic,
which can be checked automatically via 'gcc -fsanitize=undefined'.
** Changes in behavior
In the default C locale, diagnostics now quote 'like this' (with
apostrophes) instead of `like this' (with a grave accent and an
apostrophe). This tracks the GNU coding standards.
'sed --posix' now warns about uses of backslashes in the 's' command
that are handled by GNU sed but are not portable to other
implementations.
** Build-related
builds no longer fail on platforms without the <getopt.h> header or
getopt_long function.
[bug introduced in sed 4.9]
libfastjson: add missing runtime dependency on libm
libfastjson uses modf() from libm but does not declare the dependency.
With BIND_NOW (CONFIG_PKG_RELRO_FULL), this can cause the dynamic linker
to process libfastjson's relocations before libm's GOT is set up,
triggering a crash in libm's IFUNC resolver on PowerPC.
files/etc/init.d/https-dns-proxy:
- Wrap the notrack chain in its own `inet https_dns_proxy_notrack`
table. A top-level `chain` outside any table is invalid nftables
syntax and is rejected on kernel 6.18+, breaking firewall load.
Fixes mossdef-org/https-dns-proxy#7.
- Syntax-check the generated snippet with `nft -c -f` after write
and report OK/FAIL on the start path.
- On remove, explicitly `nft delete table` in addition to removing
the snippet file, so the live ruleset is cleaned up immediately
rather than waiting for the next fw4 reload.
Alexander Krause [Wed, 29 Apr 2026 19:34:57 +0000 (21:34 +0200)]
adguardhome: added ujail dependency
In order to create a proper jail, we net the procd-ujail package.
Otherwise, AdGuardHome will run as unprivileged process,
and will not be able to listen on ports below 1024.
zstd: add test.sh for script wrappers without --version
zstdgrep and zstdless are shell script wrappers that do not output a
version string, so the generic CI version check fails for them. Add a
test.sh case that verifies they are present and executable instead.
dbus-utils utilities do not implement --version so the generic CI
version check fails for them. Add a test.sh case that verifies the
binaries are present and executable instead.
dbus-utils: dbus-monitor, dbus-send, dbus-test-tool Signed-off-by: Alexandru Ardelean <redacted>
Several bluez utilities do not implement --version so the generic CI
version check fails for them. Add test.sh cases that verify the
binaries are present and executable instead.
Changes in 3.10:
- general bug fixes from libsepol (bounds statements in optional
blocks, type attribute handling in role-types rule, NULL dereference
and use-after-free fixes)
- treewide: add .clang-format configuration file
Changes in 3.10:
- python/sepolicy: add support for DNF5
- sandbox/seunshare: replace system() with execv() to prevent shell
injection vulnerability
- seunshare: always use translations when printing
- setfiles: add -A option to disable SELINUX_RESTORECON_ADD_ASSOC
Changes in 3.10:
- improve semanage man pages: add examples for -r RANGE flag usage
- semanage: reset active value when deleting boolean customizations
- various libsemanage/libsepol bug fixes and security hardening
Existing package contains five libraries, some of which are > 1MB. Allow
packages which depend on only some of them to only pull in the ones they
need by splitting this package into finer-grained packages. Transition
can be done piecemeal as depending on glib2 will still pull in all the
libraries.
The original split commit (6bb0d6bd2) had a typo: the glib2 meta-package
used 'DEPENDS:+glib2-gthread +glib2-gio' (missing '='), which caused
the meta-package to have no effective dependencies. This meant packages
declaring '+glib2' did not get the sub-packages installed, causing APK
dependency checks to fail for all glib2 libraries across ~60 packages.
This re-applies the split with 'DEPENDS:=+glib2-gthread +glib2-gio'
(correct assignment syntax), so the meta-package properly pulls in all
sub-packages for consumers that still declare '+glib2'.
Signed-off-by: Alexandru Ardelean <redacted> Signed-off-by: Alexandru Ardelean <redacted>
The generic CI test fails for /usr/bin/attr because that binary does
not implement --version. getfattr and setfattr do, so test those for
the version string and only verify attr is present and executable.
The CMakeLists.txt first tries FindLuaJIT.cmake which uses
NO_DEFAULT_PATH with hardcoded host paths, so it always fails in
cross-compilation. The fallback find_package(Lua REQUIRED) may also
fail to find a flat sysroot layout where lua.h lives at
/usr/include/lua.h rather than a versioned subdirectory.
Explicitly pass LUA_INCLUDE_DIR and LUA_LIBRARY to CMake to bypass
both finders, and depend on +liblua (the library package) instead of
+lua to ensure Build/InstallDev runs and Lua headers are present in
the staging directory before this package builds.
- introduced a shared named nft limit (loglimit) referenced by
all log rules instead of per-rule limits, aligning with kernel printk rate limits
- added new 'ban_logratelimit' and 'ban_logburstlimit' UCI options for tuning
the shared log limit; setting ban_logratelimit=0 disables nft-side rate limiting
entirely (useful for ulogd or other userspace log handlers that bypass printk)
- LuCI: made the new UCI option available (Log Settings)
- readme update
wgsd (WireGuard Service Discovery plugin) pulls in
golang.zx2c4.com/wireguard/wgctrl -> mdlayher/genetlink v1.2.0 ->
mdlayher/netlink v1.6.2. This version of netlink calls
mdlayher/socket's Sendmsg/Recvmsg with the old API signatures
(pre-context.Context, single-return-value Sendmsg), but coredns
itself requires mdlayher/socket v0.5.1 which changed these
signatures to include context.Context and return (int, error).
Add a go get step that upgrades netlink to v1.7.2 after the wgsd
plugin dependencies are pulled in, ensuring the build uses a
netlink version compatible with socket v0.5.x.
Should fix:
https://downloads.openwrt.org/snapshots/faillogs/i386_pentium-mmx/packages/coredns/compile.txt
```
../../../../../dl/go-mod-cache/github.com/mdlayher/netlink@v1.6.2/conn_linux.go:105:9: too many return values
have (int, error)
want (error)
../../../../../dl/go-mod-cache/github.com/mdlayher/netlink@v1.6.2/conn_linux.go:105:35: not enough arguments in call to c.s.Sendmsg
have ([]byte, nil, *"golang.org/x/sys/unix".SockaddrNetlink, number)
want (context.Context, []byte, []byte, "golang.org/x/sys/unix".Sockaddr, int)
../../../../../dl/go-mod-cache/github.com/mdlayher/netlink@v1.6.2/conn_linux.go:116:9: too many return values
have (int, error)
want (error)
../../../../../dl/go-mod-cache/github.com/mdlayher/netlink@v1.6.2/conn_linux.go:116:33: not enough arguments in call to c.s.Sendmsg
have ([]byte, nil, *"golang.org/x/sys/unix".SockaddrNetlink, number)
want (context.Context, []byte, []byte, "golang.org/x/sys/unix".Sockaddr, int)
../../../../../dl/go-mod-cache/github.com/mdlayher/netlink@v1.6.2/conn_linux.go:127:42: not enough arguments in call to c.s.Recvmsg
have ([]byte, nil, number)
want (context.Context, []byte, []byte, int)
../../../../../dl/go-mod-cache/github.com/mdlayher/netlink@v1.6.2/conn_linux.go:142:41: not enough arguments in call to c.s.Recvmsg
have ([]byte, nil, number)
want (context.Context, []byte, []byte, int)
github.com/aws/aws-sdk-go-v2/aws/protocol/query
github.com/aws/aws-sdk-go-v2/service/internal/accept-encoding
github.com/aws/smithy-go/private/requestcompression
```
The prosody.im upstream updated the 0.12.4 tarball in-place, changing
its content without bumping the version. Update PKG_HASH to match the
currently published tarball.
Fixes: f4d305b73 ("prosody: update to 0.12.4") Signed-off-by: Alexandru Ardelean <redacted>
- fix log rate limit and drop throttling (#29255, #27990)
- serialize dedup writes via flock in f_down
- tighten RDAP CIDR validation and lock handling in f_monitor
- fix IPv6 prefix regex in f_search, simplify sed pattern in f_report
- readme update
Update config for vrrp_script in keepalived.config.
Add option name, direction and timeout in config.
Add some docs for option weight and option direction.
keepalived: use section vrrp_script for option track_script
`track_script` and `vrrp_script` are both sections that run custom scripts
which handle priority of a vrrp_instance.
`track_script` is not supported by this uci implementation
`vrrp_instance` was still trying to fetch config for track_script from section
'track_script'.
After the changes, when listing track_script in vrrp_instance,
it tries to fetch config from section `vrrp_script` which is supported.
Add logic to parse track_script section for vrrp_sync_group.
Keepalived supports script tracking in vrrp_sync_group but this was not
implemented by the uci implementation.
Note that if a vrrp_script is added to a sync group, you cannot use
priority/weight for that script as a vrrp_sync_group does not have a
priority/weight attached to it. It will do up/down as whole.
This option is optional and wouldn't affect any older configurations
during upgrade.
Removed unnecessary option value. This was not needed as option name is
already being used. Also removed a condition where the section was not
parsed if option value was not given. Value was being used to name the
script. Now the option name is used as the name when the script is called
in track_script.
Also added a condition where the section is not parsed if
option name is not given. This is because the script cannot be called if
it does not have a name.
No upgrade script is required.
The removed `value` option in `vrrp_script` was previously used to
identify scripts referenced by `track_script`. However, this mechanism
was non-functional:
- `track_script` attempted to reference a `track_script` section, which
is not implemented in the UCI configuration.
- As a result, script references were not resolved correctly even if
`value` was defined.
With this change, `track_script` now correctly references the
`vrrp_script` section, and the `name` option is used as the identifier.
Since the previous behavior was not working as intended, removing the
`value` option does not break any valid existing configurations.
keepalived: add indent param in config_section_open/close
Add a parameter for indent in config_section_open and
config_section_close. Previously you had to separately add indents
while parsing if a section was inside another section.
Now this is supported by these two functions.
You can specify how much indent you need to add before opening or closing
a section.
Tim Flubshi [Sun, 26 Apr 2026 16:00:44 +0000 (18:00 +0200)]
ddns-scripts: netcup.com adjust update error path
Adjust the update error handling path to avoid hard failures on
recoverable errors. This allows ddns to retry updates after the
configured retry interval and improves reliability.
Tim Flubshi [Sun, 26 Apr 2026 15:52:27 +0000 (17:52 +0200)]
ddns-scripts: netcup.com use json_load_file
Replace manual file loading via cat with json_load_file for parsing
JSON data. This uses the intended helper function and improves
code clarity and robustness.
Tim Flubshi [Sun, 26 Apr 2026 15:47:02 +0000 (17:47 +0200)]
ddns-scripts: fix netcup.com readonly variable
The netcup ddns update script fails on subsequent runs because a
readonly variable is assigned again. Fix this by removing the readonly
declaration to allow repeated execution.
Prompted by
https://github.com/openwrt/luci/pull/8420#issuecomment-4071252681
we update upsmon configs to ensure they are correct according to
upstream. We reorder the options so that they match upstream
documentation at
<https://networkupstools.org/docs/man/upsmon.conf.html> to be sure
we have not missed any items.
While at it, we add configuration options from the upstream
documentation that are not currently present in the UCI configs.
Some years ago upstream changed the names the primary/secondary
UPS system/monitor from master/slave to primary/secondary. It
is uncertain how much longer these deprecated names will be
accepted by NUT.
Therefore update naming to match upstream documentation and
configuration. See
<https://networkupstools.org/docs/man/upsmon.html>,
<https://networkupstools.org/docs/man/upsmon.conf.html>, and
<https://networkupstools.org/docs/man/upsd.users.html>.
At the same time, prompted by
https://github.com/openwrt/packages/pull/28875#issuecomment-4079307540
we simplify the configuration and add checks to avoid bad configs
due to misspellings/typos of configuation options by users.
config notifications 'ONLINE'
option message "UPS %s is on line power"
option flag "SYSLOG"
config notifications 'ONBATT'
option message "UPS %s is on battery power"
option flag "SYSLOG+EXEC"
In order to iterate through the notifications, we use named
'notifications' sections and compare the section name to list of
notification events defined by NUT. If they don't match, warn
during initscript startup.
Josef Schlehofer [Mon, 27 Apr 2026 07:24:45 +0000 (09:24 +0200)]
Revert "gkrellmd: use finer-grained dependencies on glib2"
This is a follow-up revert. Since the underlying commit was reverted,
this one must be reverted too to avoid breakage. See commit e46654db2 for context.
python-zope-event: fix build with setuptools >= 81
The pyproject.toml for zope.event 6.1 specifies a strict build
dependency of setuptools>=78.1.1,<81. We currently package
setuptools>=81, causing pip to report a missing dependency and
fail the build.
Add patch 001-relax-setuptools-version.patch to drop the <81 upper
bound, allowing the package to build with any recent setuptools.
Add test.sh to verify the installed version and exercise the core
event API (subscribers list, notify(), event dispatch).
Peter Denison [Tue, 31 Oct 2023 17:58:08 +0000 (17:58 +0000)]
gkrellmd: use finer-grained dependencies on glib2
Following the split of glib2, depend on the more fine-grained packages
to reduce the installed size. Gkrellmd only needs to depend on the core glib2
library, gmodule and gthread, and not on gobject or gio.
Peter Denison [Sun, 29 Oct 2023 17:49:58 +0000 (17:49 +0000)]
glib2: split package into separate libraries
Existing package contains five libraries, some of which are > 1MB. Allow
packages which depend on only some of them to only pull in the ones they
need by splitting this package into finer-grained packages. Transition
can be done piecemeal as depending on glib2 will still pull in all the
libraries.
John Audia [Thu, 25 Dec 2025 18:22:13 +0000 (13:22 -0500)]
xtables-addons: bump 3.30 and fix LUA build on 6.18
This upstream release allows clean builds against linux 6.18. Fix LUA
PacketScript build on 6.18 by switching to ccflags-y and restoring the
required -isystem include path. Remove compat_xtables since the module
no longer exists in 3.30 and drop all dependent kmod references.
Fix CI build failure with backport:
600-xt_pknock-fox-do_div-signness-mismatch.patch
Note that upstream tarball changed from xz to zst.
Stan Grishin [Fri, 24 Apr 2026 18:28:04 +0000 (18:28 +0000)]
https-dns-proxy: update to 2025.12.29-5
Maintainer: me
Compile tested: x86_64, Dell EMC Edge620, OpenWrt 25.12.1
Run tested: x86_64, Dell EMC Edge620, OpenWrt 25.12.1
Description:Add nftables notrack for localhost traffic
- Removed. License is now included in the main project.
net/https-dns-proxy/Makefile:
- Bumped PKG_RELEASE to 5.
net/https-dns-proxy/files/etc/config/https-dns-proxy:
- Added 'option notrack_dns '1'' to the default configuration.
net/https-dns-proxy/files/etc/init.d/https-dns-proxy:
- Defined NOTRACK_NFT_FILE constant.
- Added 'notrack_dns' and 'notrack_ports' variables.
- Implemented 'notrack_nft' function to manage nftables rules for notracking local DNS traffic.
- Enabled loading of 'notrack_dns' boolean from configuration.
- Modified start_instance to collect listen_port into notrack_ports if notrack_dns is enabled.
- Modified start_service to call notrack_nft update/remove based on notrack_dns and collected ports.
- Modified stop_service to call notrack_nft remove.
- Updated service_started and service_stopped to trigger firewall config changes when notrack_dns is enabled.
Add --no-build-isolation to PYTHON_SETUP_ARGS. Without it, pip creates
an isolated build environment which fails during cross-compilation
because _sysconfigdata is missing for the target arch.
Add test.sh verifying python3-sepolgen module loads correctly and
selinux-audit2allow binary is functional.
Add HOST_PYTHON3_PIP_VARS and --no-build-isolation to MAKE_VARS.
Without --no-build-isolation, pip creates an isolated build environment
which fails during cross-compilation because _sysconfigdata is missing.
Aligns with python-selinux which already has this fix.
The libsemanage pywrap uses the host Python's EXT_SUFFIX to name the
C extension, so we will use the PYCEXT env-var to correct that.
Add basic test.sh to verify the semanage Python bindings load correctly
in environments without SELinux kernel support.
Add --no-build-isolation to PYTHON_SETUP_ARGS. Without it, pip creates
an isolated build environment which fails during cross-compilation
because _sysconfigdata is missing for the target arch.
Add test.sh with basic import and API sanity checks.
Stan Grishin [Fri, 24 Apr 2026 17:09:22 +0000 (17:09 +0000)]
adblock-fast: update to 1.2.2-18
* Switch Hagezi URL to a more compact higher-level only domains list as we
prefer it anyways and there's less processing (thanks @dave14305)
* When update_config_sizes is unset, save collected sizes to RAM to improve
luci app performance (thanks @sshaikh)
Matthew Cather [Wed, 18 Feb 2026 18:19:41 +0000 (12:19 -0600)]
valkey: add new package
Valkey is a community fork of the key-value database Redis.
It is a drop in replacement to Redis so most of the files are
derived from their Redis equivalent.
Co-authored-by: George Sapkin <redacted> Signed-off-by: Matthew Cather <redacted>
git.99rst.org / openwrt-packages.git / log