include $(TOPDIR)/rules.mk
PKG_NAME:=vpnbypass
-PKG_VERSION:=1.0.1
+PKG_VERSION:=1.1.1
PKG_RELEASE:=1
PKG_LICENSE:=GPL-3.0+
PKG_MAINTAINER:=Stan Grishin <stangri@melmac.net>
define Package/$(PKG_NAME)/description
This service can be used to enable simple VPN split tunnelling.
-Supports accessing domains, IP ranges outside of your VPN tunnel.
+Supports accessing domains, IP ranges outside of your VPN tunnel.
Also supports dedicating local ports/IP ranges for direct internet access (outside of your VPN tunnel).
Please see the README for further information.
-
endef
define Package/$(PKG_NAME)/conffiles
endef
define Build/Prepare
+ sed -i "s|^\(PKG_NAME\).*|\1='$(PKG_NAME)'|" ./files/vpnbypass.init
+ sed -i "s|^\(PKG_VERSION\).*|\1='$(PKG_VERSION)-$(PKG_RELEASE)'|" ./files/vpnbypass.init
endef
define Build/Configure
$(INSTALL_DATA) ./files/vpnbypass.hotplug $(1)/etc/hotplug.d/firewall/92-vpnbypass
endef
-$(eval $(call BuildPackage,$(PKG_NAME)))
\ No newline at end of file
+$(eval $(call BuildPackage,$(PKG_NAME)))
#!/bin/sh /etc/rc.common
+PKG_NAME='vpnbypass'
+PKG_VERSION=
-START=92
+START=94
USE_PROCD=1
-TID="200"; FW_MARK="0x010000"; IPSET="vpnbypass";
+TID="200"; FW_MARK="0x010000"; IPSET="vpnbypass";
output() {
- [ -z "$verbosity" ] && config_get verbosity 'config' 'verbosity' '2'
- [ -n "$2" -a $((verbosity)) -ne $(($2)) ] && return 0;
+ [ -n "$2" ] && [ ! $(($verbosity & $2)) -gt 0 ] && return 0;
[ -t 1 ] && echo -e -n "$1"
- [ $(echo -e -n "$1" | wc -l) -gt 0 ] && logger -t "vpnbypass[$$]" "$(echo -e -n ${logmsg}${1})" && logmsg='' || logmsg=${logmsg}${1}
+ [ $(echo -e -n "$1" | wc -l) -gt 0 ] && logger -t "${PKG_NAME:-service} [$$]" "$(echo -e -n ${logmsg}${1//$p_name /service })" && logmsg='' || logmsg=${logmsg}${1//p_name /service }
}
vpnbypass_enabled() {
- config_get_bool enabled 'config' 'enabled' 0
- [ $((enabled)) -gt 0 ] && return 0 || { output "VPNBypass is not enabled in the config file!\nTo enable, run 'uci set vpnbypass.config.enabled=1; uci commit vpnbypass'\n"; return 1; }
+ config_load vpnbypass
+ config_get_bool enabled 'config' 'enabled' 0
+ config_get verbosity 'config' 'verbosity' '2'
+ [ -n "$PKG_NAME" -a -n "$PKG_VERSION" ] && p_name="$PKG_NAME $PKG_VERSION" || p_name='vpnbypass'
+ [ "$enabled" -ne "0" ] && return 0
+ output "$p_name is not enabled in the config file!\n"
+ output "To enable, run 'uci set vpnbypass.config.enabled=1; uci commit vpnbypass'\n"
+ return 1
}
-boot() { ubus -t 30 wait_for network.interface.wan && rc_procd start_service || output 'ERROR: Failed to settle network interface!\n'; }
+boot() { ubus -t 30 wait_for network.interface.wan && { rc_procd start_service; rc_procd service_triggers; } || output "ERROR: $p_name failed to settle network interface!\n"; }
start_service() {
local ll c=1
- config_load vpnbypass
- vpnbypass_enabled || return 1
- config_get lports 'config' 'localport'
- config_get rports 'config' 'remoteport'
- config_get routes 'config' 'remotesubnet'
- config_get ranges 'config' 'localsubnet'
- config_get domains 'config' 'domain'
+ config_load vpnbypass
+ vpnbypass_enabled || return 1
+ config_get lports 'config' 'localport'
+ config_get rports 'config' 'remoteport'
+ config_get routes 'config' 'remotesubnet'
+ config_get ranges 'config' 'localsubnet'
+ config_get domains 'config' 'domain'
procd_open_instance
procd_set_param stdout 1
procd_close_instance
source /lib/functions/network.sh
- while : ; do network_get_ipaddr wanip wan; network_get_gateway gwip wan; [ $c -ge 5 ] && break || let "c+=1"; [ -n "$wanip" -a -n "$gwip" ] && break || sleep 5; done
- [ -z "$wanip" -o -z "$gwip" ] && output 'ERROR: Could not get WAN interface IP: $wanip or Gateway: $gwip\n' && exit 0
+ while : ; do network_get_ipaddr wanip wan; network_get_gateway gwip wan; [ $c -ge 5 ] && break || let "c+=1"; [ -n "$wanip" -a -n "$gwip" ] && break || output "$p_name waiting for wan gateway...\n"; sleep 2; network_flush_cache; done
+ [ -z "$wanip" -o -z "$gwip" ] && output "ERROR: $p_name could not get wan interface IP: $wanip or gateway: $gwip!\n" && exit 0
for ll in ${routes}; do { [ "$ll" = "${ll#*\/*}" ] && ll="${ll}/32"; ip route del $ll; ip route add $ll via $gwip; } >/dev/null 2>&1; done
{ ip rule del fwmark $FW_MARK table $TID; iptables -t mangle -F; ipset -F $IPSET; ipset -X $IPSET; } >/dev/null 2>&1
for ll in ${ranges}; do [ "$ll" = "${ll#*\/*}" ] && ll="${ll}/32"; iptables -t mangle -I PREROUTING -s $ll -j MARK --set-mark $FW_MARK/$FW_MARK -m comment --comment "vpnbypass"; done
iptables -t mangle -A PREROUTING -m set --match-set $IPSET dst -j MARK --set-mark $FW_MARK/$FW_MARK -m comment --comment "vpnbypass"
ip rule add fwmark $FW_MARK table $TID
- output "vpnbypass started with TID: $TID; FW_MARK: $FW_MARK\n"
+ output "$p_name started with TID: $TID; FW_MARK: $FW_MARK\n"
}
stop_service() {
local ll
- config_load vpnbypass
- vpnbypass_enabled || return 1
- config_get routes 'config' 'remotesubnet'
+ vpnbypass_enabled || return 1
+ config_get routes 'config' 'remotesubnet'
for ll in ${routes}; do [ "$ll" = "${ll#*\/*}" ] && ll="${ll}/32"; ip route del $ll >/dev/null 2>&1; done
# iptables-save | grep -Fv -- "vpnbypass" | iptables-restore
{ ip rule del fwmark $FW_MARK table $TID; iptables -t mangle -F; ipset -F $IPSET; ipset -X $IPSET; } >/dev/null 2>&1
{ ip route flush table $TID; ip route flush cache; } >/dev/null 2>&1
- output "vpnbypass stopped\n"
+ output "$p_name stopped\n"
}
-reload_service()
-{
- start_service
-}
+reload_service(){ start_service; }
service_triggers() {
- procd_add_reload_trigger 'vpnbypass'
- procd_add_reload_interface_trigger 'wan'
+ procd_add_reload_trigger 'vpnbypass'
+ procd_open_trigger
+ procd_add_config_trigger "config.change" "vpnbypass" /etc/init.d/vpnbypass reload
+ procd_add_interface_trigger "interface.*" "wan" /etc/init.d/vpnbypass reload
+ procd_close_trigger
}
git.99rst.org / openwrt-packages.git / commitdiff