use strict;
use warnings;
+use LWP::Simple qw();
+use Irssi;
-our $VERSION = '0.8.10'; # 865d608a5aa6332
+our $VERSION = '1.0'; #
our %IRSSI = (
authors => 'Rocco Caputo (dngor), Nei',
contact => 'rcaputo@cpan.org, Nei @ anti@conference.jabber.teamidiot.de',
#
# /help set setting_here
#
-# to print out its documentation (as far as it was included in the
-# Irssi 0.8.18 settings notes)
+# to print out its documentation (as far as it was documented on the
+# Irssi website)
# NOTE
# ====
-# the original settings.text is included in a heredoc string at the
-# end of this script.
+# This script will download the settings documentation from the
+# website every time it is loaded
-my $setting;
my %help;
-my $help;
-my $license;
-my $header = 1;
-for (split "\n", $help) {
- chomp;
- if (/^\s*$/) {
- undef $header;
- }
- if (/^ (\w.*) =/) {
- $setting = "\L$1";
- }
- elsif (/^ {3}/ || /^\s*$/) {}
- else { undef $setting }
- if ($setting) {
- push @{$help{"settings/$setting"}}, $_
- }
- if (/License/) {
- print CLIENTCRAP '%U%_Irssi Settings documentation license%:' unless $license;
- $license = 1;
+
+{
+ print STDERR " .. downloading settings documentation .. ";
+ local $LWP::Simple::ua->{timeout} = 2;
+ my $res = LWP::Simple::get("https://github.com/irssi/irssi.github.io/raw/master/documentation/settings/index.markdown");
+ Irssi::command('redraw');
+ my @res = split "\n", $res if defined $res;
+ die "Error downloading settings" unless @res && $res[0] eq '---';
+ while (@res) {
+ my @info;
+ my $soon = 0;
+ my $setting;
+ my $val;
+ while (defined(my $line = shift @res)) {
+ if ($line =~ /^\{:#(\w+)\}/i) {
+ $soon = 1;
+ $setting = $1;
+ }
+ elsif ($soon == 1 && $line =~ /^` (.*) `$/) {
+ $val = $1;
+ $soon++;
+ }
+ elsif ($soon && $line =~ /^>+(?:\s|$)/) {
+ next if $line =~ /^>>+$/;
+ next if $line =~ /^>+\s+!/;
+ $line =~ s/^>+//;
+ push @info, $line;
+ }
+ elsif (@info) {
+ unshift @res, $line;
+ last;
+ }
}
- if ($header || $license) {
- print CLIENTCRAP $_;
+ unshift @info, $val if defined $val;
+ s/`//g for @info;
+ if (@info) {
+ my $sep =($info[0] =~ s/^\Q$setting\E\s+=(\s+|\s*$)//i) ? '' : ':';
+ my $clr = !$sep && !$info[0] ? '-clear ' : '';
+ my @info2 = ("/set $clr\cB\L$setting\E\cB$sep ".(shift @info),'',(map {" $_"} @info),'');
+ s/%/%%/g for @info2;
+ push @{$help{"settings/$setting"}}, @info2;
}
+ }
}
+print CLIENTCRAP '%U%_Irssi Settings documentation licence%: ' . $IRSSI{license};
print CLIENTCRAP '%:You can now read help for settings with %_/HELP SET settingname%_';
Irssi::signal_add_first(
'command help' => sub {
if ($_[0] =~ s|^set\s+|settings/|i && $_[0] ne 'settings/' && ($_[0]="\L$_[0]")
&& $_[0] =~ /^(.*?)(?:\s+|$)/ && exists $help{$1}) {
- print CLIENTCRAP join "\n", '%_Setting:%_%:', @{$help{$1}};
+ print CLIENTCRAP join "\n", '', '%_Setting:%_%:', @{$help{$1}};
Irssi::signal_stop;
}
}
}
}
);
-
-UNITCHECK { $help = <<'END'; }
-Irssi 0.8.10 settings notes. Gathered through much effort by Rocco
-Caputo <rcaputo at cpan dot org> (aka "dngor"). Includes original
-work by Nei, and advice and guidance from irc.freenode.net #irssi.
-
-This is not an attempt to document Irssi completely. It should be
-used along with the documents at <http://irssi.org/documentation> for
-more complete understanding of how irssi works. For example, the
-startup HOWTO and tips/tricks show sample uses for these settings,
-including some very useful stuff.
-
-We respect the work of others. Parts of this document have been
-collected from other locations. Wherever possible, we have made every
-effort to locate and attribute the original authors. Please let us
-know if we've overlooked you.
-
-We ask the same respect in return. The Copyright and license notices
-are at the end.
-
------
-
-2005-Dec-08: (dngor)
-
- Switched to Creative Commons' ShareAlike license. We'd like to
- thank Coekie <coekie@irssi.org> for pointing out out that the
- previous license was weak, and that he could just alter it and
- redistribute our work without attribution.
-
- Minor revisions throughout a major portion of the document.
-
-2005-Dec-07: (Nei)
-
- Set example values to default values where appropriate.
- Add new settings from 0.8.10.
- Sorted settings according to my local /set output.
-
- (dngor) Marked the 0.8.10 settings as coming from that version.
-
-2005-Dec-01: (Nei)
-
- Updated some links. Renamed term_type.
-
-2005-06-05: (dngor)
-
- Tweaked an example to use the same command the surrounding text said
- it was.
-
-2005-05-04: (dngor)
-
- Not terribly significant. All edits happened in the introduction.
-
------
-
-[completion]
-
- completion_strict = OFF
-
- When on, nicknames are matched strictly. That is, the partial
- nickname you enter must be at the beginning of a nickname in one
- of irssi's lists.
-
- When off, irssi will first try a strict match. If a strict match
- can't be found, irssi will look for nicknames that match when
- their leading non-alphanumeric characters are removed. For
- example:
-
- vis: hello
-
- With strict completion on, it will only match nicknames beginning
- with "vis". With strict completion off, it may match "visitors"
- or "_visitors_" or "[visitors]", and so on.
-
- completion_keep_privates = 10
-
- Irssi keeps a list of nicknames from private messages to search
- during nick completion. This setting determines how many
- nicknames are held.
-
- TODO - Is this list maintained by people who privately message
- you, who you privately message, or both?
-
- completion_char = :
-
- The text that irssi puts after a tab-completed nickname, or that
- it uses to detect nicknames when you have completion_auto turned
- on. Some people alter this to colorize the completion character,
- creating the oft-dreaded "bold colon".
-
- completion_auto = OFF
-
- Tell irssi to detect incomplete nicknames in your input and look
- up their completions automatically. Incomplete nicknames are
- detected when you input text that matches
- /^(\S+)${completion_character}/. For example:
-
- vis: hello
-
- will be expanded to
-
- visitors: hello
-
- when you press enter. So will:
-
- vis:hello
- Vis::Hello(12);
-
- This will eventually bite you.
-
- completion_nicks_lowercase = OFF
-
- When enabled, irssi forces completed nicknames to lowercase.
- Manually typed nicknames retain their case.
-
- completion_keep_publics = 50
-
- Irssi keeps a list of nicknames from public messages to search
- during nick completion. This setting determines how many
- nicknames are held.
-
- TODO - Is this list maintained by watching who you speak to, who
- speak to you, or both?
-
-[dcc]
-
- dcc_autorename = OFF
-
- Turn on this setting to automatically rename received files so
- they don't overwrite existing files.
-
- I think this setting may thwart dcc_autoresume, since the
- auto-resume feature looks for existing filenames when resuming.
- Auto-renaming downloads makes sure that filenames never conflict,
- so resuming is not possible.
-
- dcc_autoresume = OFF
-
- When on, dcc_autoresume will cause irssi to look for existing
- files with the same name as a new DCC transfer. If a file already
- exists by that name, irssi will try to resume the transfer by
- appending any new data to the existing file.
-
- I think this option clashes with dcc_autorename. See
- dcc_autorename for more information.
-
- Dcc_autoresume is ignored if dcc_autoget is off.
-
- dcc_timeout = 5min
-
- How long to keep track of pending DCC requests. Requests that do
- not receive responses within this time will be automatically
- canceled.
-
- dcc_autoget = OFF
-
- Turn DCC auto-get on or off. When on, irssi will attempt to
- auto-get files sent to you.
-
- This feature can be abused, so it is usually off by default. If
- you enable it, consider also setting dcc_autoget_masks and
- dcc_autoget_max_size to make this feature more secure.
-
- dcc_upload_path = ~
-
- The path where you keep public files available to send via DCC.
-
- dcc_autoget_masks =
-
- Set dcc_autoget_masks with user masks to automatically accept
- files sent to you via DCC. When unset, irssi's auto-get settings
- will work for everyone who attempts to send you files.
-
- This setting is only significant if dcc_autoget is ON.
-
- dcc_autoget_max_size = 0k
-
- Set to nonzero to limit the size of files that irssi will
- auto-get.
-
- Note: Because of the way DCC works, someone may advertise a file
- at once size but try to send you something larger. According to
- src/irc/dcc/dcc-autoget.c, this only filters the request based on
- the advertised size.
-
- This setting is only significant if dcc_autoget is ON.
-
- dcc_send_replace_space_with_underscore = OFF
-
- When enabled, irssi will replace spaces with underscores in the
- names of files you send. It should only be necessary when sending
- files to clients that don't support quoted filenames, or if you
- hate spaces in filenames.
-
- dcc_own_ip =
-
- Set dcc_own_ip to force irssi to always send DCC requests from a
- particular virtual host (vhost). Irssi will always bind sockets
- to this address when answering DCC requests. Otherwise irssi will
- determine your IP address on its own.
-
- dcc_download_path = ~
-
- The path to a directory where irssi will store DCC downloads.
-
- dcc_file_create_mode = 644
-
- The mode in which new files are created.
-
- 644 is read/write by you, and readable by everybody else. 600
- is read/write by you, nobody else can read or write.
-
- dcc_port = 0
-
- The smallest port number that irssi will use when initiating DCC
- requests. Irssi picks a port at random when this is set to zero.
-
- dcc_port can be two ports, separated by a space. In that case,
- irssi will pick a port between the two numbers, inclusively. For
- example:
-
- /set dcc_port 10000 20000
-
- dcc_autochat_masks =
-
- Set dcc_autochat_masks with user masks to auto-accept chat
- requests from. When unset, irssi's auto-accept settings work for
- everyone who tries to DCC chat you. The drawbacks can range from
- annoying through downright dangerous. Use auto-accept with care.
-
- dcc_mirc_ctcp = OFF
-
- Tells irssi to send CTCP messages that are compatible with mIRC
- clients. This lets you use "/me" actions in DCC chats with mIRC
- users, among other things.
-
- dcc_autoaccept_lowports = OFF
-
- When this setting is OFF, irssi will not auto-accept DCC requests
- from privileged ports (those below 1024) even when auto-accept is
- otherwise on.
-
-[flood]
-
- autoignore_time = 5min
-
- Irssi can auto-ignore people who are flooding. autoignore_time
- sets the amount of time to keep someone ignored. Irssi will
- automatically unignore them after this period of time has elapsed.
-
- autoignore_level =
-
- The type or types of messages that will trigger auto-ignore.
-
- flood_max_msgs = 4
- flood_timecheck = 8
-
- Irssi will treat text as flooding if more than flood_max_msgs
- messages are received during flood_timecheck seconds. In the case
- above, five or more messages matching autoignore_level over the
- course of eight seconds will trigger flood protection. See
- autoignore_time to set the amount of time someone will remain
- ignored if it's determined that they're flooding.
-
- cmds_max_at_once = 5
-
- How many commands you can send immediately before server-side
- flood protection starts.
-
- IRC servers also perform flood checking, and they will gleefully
- disconnect you if you are abusing them. The cmds_max_at_once
- setting lets irssi know how many rapid messages it can get away
- with while remaining under the IRC server's radar.
-
- cmd_queue_speed = 2200msec
-
- The time to wait between sending commands to an IRC server. Used
- to prevent irssi from flooding you off if you must auto-kick/ban
- lots of people at once.
-
- max_ctcp_queue = 5
-
- The maximum number of pending CTCP requests to keep. Requests
- beyond max_ctcp_queue will be discarded.
-
-[history]
-
- scrollback_save_formats = OFF
-
- Turn on to save formats in the scrollback buffer, so that old
- messages are not changed by new themes. Turn off so the current
- theme applies to your entire scrollback buffer.
-
- Setting this to OFF doesn't seem to do anything, however.
-
- scroll_page_count = /2
-
- How many pages to scroll the scrollback buffer when pressing
- page-up or page-down. Expressed as a number of lines, or as a
- fraction of the screen:
-
- /2 = Scroll half a page.
- .33 = Scroll about a third of a page.
- 4 = Scroll four lines.
-
- <http://bugs.irssi.org/index.php?do=details&id=254> contains a
- patch thet lets you specify a negative number to scroll "all but
- this many" lines. That is, -1 will scroll a full page minus one
- line, for people who like that.
-
- window_history = OFF
-
- When turned ON, command history will be kept per-window. When
- off, irssi uses a single command history for all windows.
-
- max_command_history = 100
-
- The number of lines of your own input to keep for recall.
-
- scrollback_time = 1day
-
- Keep at least scrollback_time worth of messages in the scrollback
- buffer, even if it means having more than scrollback_lines lines
- in the buffer.
-
- rawlog_lines = 200
-
- Irssi's raw log is a buffer of raw IRC messages. It's used for
- debugging irssi and maybe some other things. This setting tells
- irssi how many raw messages to keep around.
-
- scrollback_lines = 500
-
- The maximum number of messages to keep in your scrollback history.
- Set to 0 if you don't want to limit scrollback by a line count.
- The scrollback_time setting will be used even if scrollback_lines
- is zero.
-
- Setting scrollback_lines to zero also seems to thwart the
- scrollback_burst_remove optimization.
-
- scrollback_burst_remove = 10
-
- This is a speed optimization: Don't bother removing messages from
- the scrollback buffer until the line limit has been exceeded by
- scrollback_burst_remove lines. This lets irssi do its memory
- management in chunks rather than one line at a time.
-
- TODO - Is this right?
-
-[log]
-
- log_close_string = --- Log closed %a %b %d %H:%M:%S %Y
-
- The message to log when logs are closed.
-
- See Appendix C for the meanings of Irssi's time format codes.
-
- log_timestamp = %H:%M
-
- The time format for log timestamps.
-
- See Appendix C for the meanings of Irssi's time format codes.
-
- autolog_colors = OFF
-
- Whether to save colors in autologs. Colors make logs harder to
- parse and grep, but they may be vital for channels that deal
- heavily in ANSI art, or something.
-
- autolog_level = all -crap -clientcrap -ctcps
-
- The types of messages to auto-log. See the autolog setting.
-
- awaylog_colors = ON
-
- Whether to store color information in /away logs.
-
- log_day_changed = --- Day changed %a %b %d %Y
-
- The message to log when a new day begins.
-
- See Appendix C for the meanings of Irssi's time format codes.
-
- autolog = OFF
-
- Automatically log everything, or at least the types of messages
- defined by autolog_level.
-
- autolog_path = ~/irclogs/$tag/$0.log
-
- The path where autolog saves logs.
-
- See Appendix B for Irssi's special variables. Irssi's special
- variables can be used to do fancy things like daily log rotations.
-
- awaylog_level = msgs hilight
-
- The types of messages to log to awaylog_file while you're away.
-
- awaylog_file = ~/.irssi/away.log
-
- Where to log messages while you're away.
-
- I assume irssi's special variables also work here. See Appendix B
- for more information about them.
-
- log_theme =
-
- Logs can have a different theme than what you see on the screen.
- This can be used to create machine-parseable versions of logs, for
- example.
-
- log_create_mode = 600
-
- The permissions to use when creating log files.
-
- 600 is read/write by you, but nobody else can see them. A
- sensible default mode. It can also be set to 644 if you want the
- rest of the world to read your logs.
-
- log_open_string = --- Log opened %a %b %d %H:%M:%S %Y
-
- The message to log when a log is opened.
-
- See Appendix C for the meanings of Irssi's time format codes.
-
-[lookandfeel]
-
- show_names_on_join = ON
-
- Display the list of names in a channel when you join that channel.
- It's generally recommended, but you can disable it for
- pathologically huge channels or in case you just don't care.
-
- window_check_level_first = OFF
- window_default_level = NONE
-
- From irssi's ChangeLog:
-
- Added /SET window_check_level_first and /SET window_default_level.
- This allows you to keep all messages with specific level in it's
- own window, even if it was supposed to be printed in channel
- window. patch by mike@po.cs.msu.su
-
- Try to choose better the window where we print when matching by
- level and multiple windows have a match. Should fix problems with
- query windows with a default msgs window + /SET
- window_check_level_first ON.
-
- Wouter Coekaerts has made a nice explanation about this, see
- <http://wouter.coekaerts.be/site/irssi/wclf>
-
- emphasis = ON
-
- Enable or disable real underlining and bolding when someone says
- *bold* or _underlined_.
-
- autocreate_split_windows = OFF
-
- Automatically created windows will be created as split windows
- with this setting on.
-
- Split windows are the kind where multiple windows are on one
- screen.
-
- beep_msg_level =
-
- Beep when messages match this level mask.
-
- actlist_moves = OFF
-
- When on, irssi rearranges the activity list so windows with more
- recent activity appear first. Otherwise windows are listed in
- numeric order.
-
- hilight_nick_matches = ON
-
- Tell irssi whether it should automatically highlight text that
- matches your nickname.
-
- emphasis_multiword = OFF
-
- Turn on to allow *more than one word bold* and _multiple
- underlined words_. Used in conjunction with the emphasis setting.
-
- hide_colors = OFF
-
- Hide mIRC and ANSI colors when turned on. This can be used to
- eliminate "angry fruit salad" syndrome in some channels.
-
- names_max_width = 0
-
- Maximum number of columns to consume with a /names listing.
- Overrides names_max_columns if non-zero. Set to 0 for "as many as
- fit in your terminal".
-
- mirc_blink_fix = OFF
-
- Some terminals interpret bright background colors as blinking
- text. mIRC doesn't support blinking at all. This fixes the
- blinky terminals by replacing high colors with their low
- equivalents.
-
- From irssi's ChangeLog:
-
- /SET mirc_blink_fix - if ON, the bright/blink bit is stripped
- from MIRC colors. Set this to ON, if your terminal shows bright
- background colors as blinking.
-
- autoclose_windows = ON
-
- Automatically close windows when nobody is in them. This keeps
- your window list tidy, but it means that query windows may
- rearrange as people log off then privately message you later.
-
- bell_beeps = OFF
-
- Tell irssi whether bell characters (chr 7, ^G) should actually
- cause beeps.
-
- According to Nei, bell_beeps seems to cover the case where a beep
- is caused by a printed message/format. It's unrelated to activity
- beeps.
-
- hide_server_tags = OFF
-
- Server tags are prefixes to some messages (server messages?) that
- let you know which server the message came from. They're often
- considered noisy, so this option lets you hide them.
-
- show_nickmode = ON
-
- Prefix nicknames with their channel status:
-
- voiced +
- half-op %
- op @
-
- theme = default
-
- Irssi supports themes that can change most of the client's look
- and feel. This setting lets you name the theme you wish to use.
-
- timestamps = ON
-
- Turn timestamps on or off. When off, not even timestamp_level
- will trigger them.
-
- indent = 10
-
- How many columns to indent subsequent lines of a wrapped message.
-
- Attention: This can be overwritten by themes.
-
- timestamp_format = %H:%M
-
- How to format the time used in timestamps.
-
- See Appendix C for the meanings of Irssi's time format codes.
-
- activity_msg_level = PUBLIC
-
- Flag a channel as active when messages of this type are displayed
- there.
-
- print_active_channel = OFF
-
- Always print the channel with the nickname (like <nick:channel>)
- even if the message is from the channel you currently have active.
-
- autoclose_query = 0
-
- Automatically close query windows after autoclose_query seconds of
- inactivity. Setting autoclose_query to zero will keep them open
- until you decide to close them yourself.
-
- activity_hide_targets =
-
- Sometimes you don't care at all about a channel's activity. This
- can be set to a list of channels that will never appear to be
- active.
-
- use_msgs_window = OFF
-
- Use a single window for all private messages. This setting only
- makes sense if automatic query windows is turned off.
-
- timestamp_timeout = 0
-
- The amount of time to leave timestamps on after a timestamp_level
- message triggered timestamping. Useful for people who think
- timestamps are noisy but would like timestamps for important
- conversations.
-
- use_status_window = ON
-
- Create a separate window for all server status messages, so they
- don't clutter up your channels.
-
- windows_auto_renumber = ON
-
- Closing windows can create gaps in the window list. When
- windows_auto_renumber is turned on, however, windows are shifted
- to lower numbers in the list to fill those gaps.
-
- show_nickmode_empty = ON
-
- If a person has no channel modes, prefix their nickname with a
- blank space. This keeps nicknames of normal people aligned with
- those of voiced, half-opped, and opped people.
-
- beep_when_away = ON
-
- Should beeps be noisy when you're /away? Great for people who
- sleep near their terminals or keep irssi running at work. :)
-
- timestamp_level = ALL
-
- Types of messages to prefix a timestamp to. Useful for explicit
- or automatic timestamps.
-
- Once timestamping is temporarily turned on, it may stay on for
- timestamp_timeout seconds.
-
- indent_always = OFF
-
- Should we indent the long words that are forcibly wrapped to the
- next line? This can break long "words" such as URLs by inserting
- spaces in the middle of them.
-
- Turn off if you would like to copy/paste or otherwise use URLs
- from your terminal.
-
- hilight_color = %Y
-
- The default color for /hilight.
-
- See Appendix D for Irssi's color codes.
-
- emphasis_replace = OFF
-
- If emphasis is turned on, the * or _ characters indicating
- emphasis will be removed when the word is made bold or underlined.
- Some people find this looks cleaner.
-
- See the emphasis setting for more information.
-
- hilight_level = PUBLIC DCCMSGS
-
- The types of messages that can be highlighted.
-
- hilight_act_color = %M
-
- The color to use to highlight window activity in the status bar.
- That's the section that shows "[Act: ...]".
-
- See Appendix D for Irssi's color codes.
-
- expand_escapes = OFF
-
- Detect escapes in input, and expand them to the characters they
- describe. For example
-
- \t
-
- Is literally '\' and 't' when expand_escapes is off, but it's the
- tab character (chr 9) when expand_escapes is on.
-
- autocreate_windows = ON
-
- When on, create new windows for certain operations, such as /join.
- When off, everything is just dumped into one window.
-
- autocreate_query_level = MSGS DCCMSGS
-
- Automatically create query windows when receiving these types of
- messages.
-
- term_auto_detach = OFF
-
- Automatically detach from the terminal when it disappears.
-
- This doesn't actually work. Or if it does, there's currently no
- way to re-attach to the terminal. It may be useful for setting up
- daemons where you don't want to run nohup or screen, however.
-
- hide_text_style = OFF
-
- Hide bold, blink, underline, and reverse attributes.
-
- whois_hide_safe_channel_id = ON
-
- Introduced in 0.8.10.
-
- Hides the unique id of !channels in /whois output (IRCNet/irc2
- networks only).
-
- E.g. shows !channel instead of !12345channel
-
- names_max_columns = 6
-
- Maximum number of columns to use for /names listing. Also shown
- on channel join. Set to 0 for "as many as fit in your terminal".
-
- chanmode_expando_strip = OFF
-
- When on, $M will not return mode parameters.
-
- This means for example that the channel limit and channel key
- won't be shown in your statusbar (a common place where $M is used)
- (but also not in all other places that refer to $M for whatever
- reason).
-
- show_quit_once = OFF
-
- When turned on, a quit message will only be shown once. Otherwise
- it will be displayed in every window you share with the quitter.
-
- show_away_once = ON
-
- When on, only show /away messages in the window that's currently
- open. Otherwise the message will appear in every window you share
- with the away person.
-
- autocreate_own_query = ON
-
- Turn on to automatically create query windows when you /msg
- someone.
-
- term_charset = US-ASCII
-
- Sets your native terminal character set. Irssi will take this
- into consideration when it needs to delete multibyte characters,
- for example.
-
- A common value is utf-8 for Unicode/UTF-8 enabled terminals.
-
- TODO - Does this still support Chinese terminal emulators? (Used
- to be term_type = big5 in old Irssi.)
-
- activity_hilight_level = MSGS DCCMSGS
-
- There are times when you want to highlight channel activity in a
- window. Like when someone sends you a private message, or a DCC
- message. Activity_highlight_level sets the kind of messages you
- think are extra important.
-
- autostick_split_windows = ON
-
- TODO - What is this?
-
- Nei says: Setting split windows to stick means that their content
- won't change. Best thing to come up with a viable description
- might be if you tried it.
-
- f0rked has written an excellent guide to irssi's split windows:
- <http://f0rked.com/articles/irssisplit>
-
- query_track_nick_changes = ON
-
- Query windows will track nick changes when this is on. That is,
- it looks for a matching user@host if a message comes in with an
- unknown nick.
-
- TODO - Really?
-
- scroll = ON
-
- Set scroll ON to have irssi scroll your screen when it fills up.
- Set it OFF to require manual scrolling.
-
- Warning: If set to OFF, this will stop scrolling in all windows
- and not reenable scrolling even if you set it back to ON. (You
- need to manually scroll to the bottom in each window first.)
-
- window_auto_change = OFF
-
- Turn this on to automatically switch to newly-created windows.
- This may cause you to misdirect messages, so be careful.
-
- beep_when_window_active = ON
-
- Should beeps be noisy in a window you're watching? Perhaps not,
- since you are theoretically watching that window. You ARE
- watching it, aren't you?
-
- activity_hide_level =
-
- Message levels that don't count towards channel activity. That
- is, channels won't be marked as "active" if messages of these
- types appear.
-
- show_own_nickchange_once = OFF
-
- Squash your own nick-change messages so they appear only once, not
- once in every window you have on that network.
-
- reuse_unused_windows = OFF
-
- When set on, irssi will reuse unused windows when looking for a
- new window to put something in. Otherwise unused windows are
- ignored, and new ones are always created.
-
- colors = ON
-
- Enable or disable colors.
-
- term_force_colors = OFF
-
- Always display colors, even when the terminal type says colors
- aren't supported. Useful for working around really dumb
- terminals.
-
- autofocus_new_items = ON
-
- Switch the focus to a new item when it's created. This may be
- disturbing at first when combined with query window auto-creation,
- and it may be downright dangerous if it causes you to accidentally
- misdirect messages.
-
-[misc]
-
- opermode =
-
- When set, irssi will set your modes to match opermode when you
- /oper up. For example, you might
-
- /set opermode +s 1048575
-
- channel_max_who_sync = 1000
-
- Introduced in 0.8.10.
-
- The maximum number of users that may be in a channel for Irssi to
- issue a
-
- /who #channel
-
- in order to obtain the hostmasks of every participant.
-
- If this is set too high, IRC servers might kick you for "Sendq
- exceeded".
-
- recode_autodetect_utf8 = ON
-
- Introduced in 0.8.10.
-
- Irssi's recode system is broken. This tries to cover up for it by
- leaving messages intact that seem to decode fine as Unicode UTF-8.
-
- lag_check_time = 1min
-
- How long to wait between active lag checks. Irssi will passively
- check for lag when you're active, but sometimes it's necessary to
- actively check. This is the minimum amount of time between active
- checks.
-
- quit_message = leaving
-
- Default message to send when /quit'ting.
-
- paste_detect_time = 5msecs
-
- Irssi will detect pastes when your input has less than this much
- time between lines.
-
- notify_check_time = 1min
-
- How often to check for someone online when /notify is on.
-
- help_path = /usr/local/share/irssi/help
-
- One or more paths where irssi will look for its help database.
- Multiple paths are separated by ":". It's very important that
- this is correct.
-
- ctcp_userinfo_reply = $Y
-
- The reply to send when someone queries your user information. By
- default, it's "$Y", which is defined by the real_name setting.
-
- See <http://irssi.org/documentation/special_vars> for more special
- variables you can use.
-
- override_coredump_limit = ON
-
- Allow really really big coredumps if this is set on.
-
- join_auto_chans_on_invite = ON
-
- Automatically join a channel when invited to it.
-
- TODO - Does this only work with channels on the /channel add -auto
- list?
-
- netjoin_max_nicks = 10
-
- When non-zero, limits the number of nicknames to display during
- netjoins.
-
- TODO - Is this correct?
-
- paste_join_multiline = ON
-
- Introduced in 0.8.10.
-
- Irssi will try to concatenate multiple lines into a single lined
- message when these lines have the same indentation level and
- "look" like they were copied out of Irssi.
-
- It's useful for quoting e-mail or other large-text messages, but
- it will probably bite you if you try to pasted indented text, such
- as code listings. Irssi will join multiple lines of code,
- destroying any structure you wanted to preserve.
-
- channel_sync = ON
-
- Set whether irssi should synchronize a channel on join. When
- enabled, irssi will gather extra information about a channel:
- modes, who list, ban list, ban exceptions, and invite list.
-
- paste_detect_keycount = 5
-
- Introduced in 0.8.10.
-
- TODO - What's this?
-
- recode_fallback = CP1252
-
- Introduced in 0.8.10.
-
- If you have Irssi compiled with recode support and Irssi believes
- that a message you received did not recode properly in your
- terminal default character set (or the specified one), it will
- recode the message using this character set.
-
- (CP1252, the irssi default, is the Microsoft(R) Windows default
- character set for Western Europe.)
-
- Also see /help recode for more details about recoding.
-
- notify_idle_time = 1hour
-
- Irssi will notify you when someone you're watching becomes idle
- for this long.
-
- massjoin_max_joins = 3
-
- If nonzero, detect mass joins. A mass join is when someone joins
- more than massjoin_max_joins per massjoin_max_wait seconds.
-
- TODO - Or is this when more than massjoin_max_joins people join
- per massjoin_max_wait seconds, regardless of the user mask?
-
- write_buffer_size = 0
-
- Amount of text (logs, etc) to buffer in memory before writing to
- disk. Useful for minimizing disk access.
-
- write_buffer_timeout = 0
-
- Amount of time to keep text in memory. A buffer is flushed to
- disk if the text in it is this old, even if the buffer isn't full.
-
- Useful in conjunction with really large write_buffer_size values,
- to prevent a lot of text from being lost if irssi crashes or is
- killed.
-
- STATUS_OPER = *
-
- TODO - What's this?
-
- recode = ON
-
- Introduced in 0.8.10.
-
- This setting allows you to disable irssi's recode functionality,
- if you prefer your messages not being messed with.
-
- ban_type = normal
-
- The default ban type to use: normal, user, host, domain, custom?
- See "/help ban" for a description of ban types.
-
- lag_max_before_disconnect = 5min
-
- Irssi detects your lag and will reconnect you automatically if
- your lag exceeds this value.
-
- part_message =
-
- Default message to send when parting a channel.
-
- auto_whowas = ON
-
- Automatically try /whowas if you /whois someone who isn't online.
-
- paste_verify_line_count = 5
-
- Ask you whether you meant to paste something if it's longer than
- this many lines.
-
- max_wildcard_modes = 6
-
- When set nonzero, don't mass op/deop/kick more than this many
- people. Commands that let you do things to other nicks can take
- wildcards. For example
-
- /kick floodbot* flooding
-
- would kick everybody whose nickname began with "floodbot". Unless
- there were more than max_wildcard_modes of them.
-
- This setting prevents you from embarassment like:
-
- /kick *
-
- You can specify "-yes" if you really want to do it:
-
- /kick -yes *
-
- hide_netsplit_quits = ON
-
- Don't display quit messages if they're the product of a netsplit.
- Some people find this helpful, while others find it creepy.
-
- knockout_time = 5min
-
- Knockouts are temporary kickbans. Knockout_time is the default
- amount of time before each temporary ban is lifted.
-
- See /help knockout
-
- massjoin_max_wait = 5000
-
- The amount of time to watch for mass-joins.
-
- I'm not sure which unit of time is used to measure
- massjoin_max_wait.
-
- lag_min_show = 1sec
-
- Lag is a part of life on IRC. Don't bother displaying lag that's
- below this threshold, presumably because you consider it to be
- insignificant.
-
- wall_format = [Wall/$0] $1-
-
- Format for wall messages.
-
- netsplit_nicks_hide_threshold = 15
-
- Limit the number of nicks to display during netsplits to this
- many. Or don't limit them at all, if this is set to 0.
-
- settings_autosave = ON
-
- Automatically save your settings when you quit irssi, or once per
- hour, rather than waiting for you to /save them yourself.
-
- translation =
-
- Set the translation table to use. See Appendix E.
-
- TODO - Does this still work even?
-
- group_multi_mode = ON
-
- Consolidate multiple consecutive channel modes into a single
- message. This will delay the display of channel modes for a short
- period of time while it waits to see if multiple modes are
- occurring.
-
- recode_out_default_charset =
-
- Introduced in 0.8.10.
-
- The outgoing character set you want your messags to be recoded
- into, if different from your term_charset.
-
- cmdchars = /
-
- Prefix characters that tell irssi that your input is a command
- rather than chat text.
-
- notify_whois_time = 5min
-
- How often to check /whois on a user who's online, to see if their
- /away or idle status changes.
-
- kick_first_on_kickban = OFF
-
- Kickban will normally ban first, then kick. Turn this option on
- to reverse the situation, which can create a race condition if the
- user rejoins between your kick and the subsequent ban.
-
- recode_transliterate = ON
-
- Introduced in 0.8.10.
-
- If enabled, irssi tells iconv to try and replace characters that
- don't recode well with similar looking ones that exist in the
- target character set.
-
- If disabled, irssi replaces the character it could not recode with
- a "?" instead.
-
- usermode = +i
-
- Default modes to set yourself once you've connected to a server.
-
- ignore_signals =
-
- Operating system signals to ignore. May be zero or more of: int,
- quit, term, alrm, usr1, and usr2.
-
- netsplit_max_nicks = 10
-
- When non-zero, limits the number of nicknames to display during
- netsplits.
-
- TODO - Is this correct?
-
- ctcp_version_reply = irssi v$J - running on $sysname $sysarch
-
- What to tell someone when they query your client's version.
-
- Some people consider announcing your client and operating system
- type and version to be a security hole. Those people change this
- setting.
-
-[perl]
-
- perl_use_lib = /usr/local/perl-582/i386-freebsd
-
- Which perl library to use, in case you have many to choose from.
-
-[proxy]
-
- use_proxy = OFF
-
- Tell irssi whether it should connect through a proxy server.
-
- proxy_string = CONNECT %s %d
-
- How to tell your proxy to initiate a connection.
-
- I haven't found documentation for the codes used in proxy_string.
-
- TODO - How do you tell irssi to connect through a proxy that
- requires authentication?
-
- proxy_string_after =
-
- Text to send after setting NICK and USER through a proxy.
-
- proxy_address =
- proxy_port = 6667
-
- The address and port of your IRC proxy.
-
- proxy_password =
-
- The password to use if the proxy requires authentication.
-
-[server]
-
- server_connect_timeout = 5min
-
- How long to wait for a connection to be established.
-
- Be careful using very short timeouts. Servers may recognize the
- activity as abuse.
-
- resolve_reverse_lookup = OFF
-
- When connecting, resolve the server's IP address back into its
- hostname. Probably useful for figuring out exactly which server
- you're on after resolving a round-robin host.
-
- ssl_cacert =
- ssl_cafile =
- ssl_cert =
- ssl_pkey =
- ssl_verify = OFF
- use_ssl = OFF
-
- SSL options. Set the certificates and keys, and stuff you'll use
- to connect to a secure server.
-
- TODO - Does verify work? If so, how?
-
- hostname =
-
- Your source hostname. Useful when you're on a multi-host system,
- and you want to look like you're connecting from a particular
- host.
-
- This setting tells irssi which IP to bind to.
-
- user_name = $IRCUSER
-
- Set your system user name. This is used in times when you don't
- have working ident.
-
- resolve_prefer_ipv6 = OFF
-
- Turn this option on to prefer using an ipv6 address when a host
- has both ipv4 and ipv6 addresses.
-
- nick = $IRCNICK
-
- Your main, preferred nick.
-
- alternate_nick =
-
- An alternate nickname to use if your preferred one is already
- taken.
-
- real_name = $IRCNAME
-
- Your "real" "name".
-
- skip_motd = OFF
-
- Turn this on to avoid displaying the server's message of the day.
- Messages of the day are often noisy, and few people actually read
- them, but they contain important information amongst the ASCII art
- and song lyrics. :)
-
- server_reconnect_time = 5min
-
- How long to wait between reconnects to the same server. Some
- servers will k-line you if you reconnect too quickly, so be
- careful setting this value lower.
-
-[servers]
-
- channels_rejoin_unavailable = ON
-
- Attempt to rejoin a channel if it's "temporarily unavailable".
- Channels may be unavailable during netsplits.
-
------
-
-Appendix A: Levels
-
-Levels are categories of messages that can be ignored or otherwise
-matched. Categories may be combined. For example, you may want to
-ignore only private messages (MSG) from someone, or you might really
-hate them and ignore MSGS and PUBLIC. Or even ALL.
-
-See "/help levels" for a better, probably more current explanation of
-the different kinds of levels irssi supports. Meanwhile:
-
- CRAP - ?
- MSGS - Match messages privately sent to you.
- PUBLIC - Match messages sent to public channels.
- NOTICES - Match NOTICE messages.
- SNOTES - Match server notices.
- CTCPS - Match CTCP messages.
- ACTIONS - Match CTCP actions.
- JOINS - Match join messages.
- PARTS - Match part messages.
- QUITS - Match quit messages.
- KICKS - Match kick messages.
- MODES - Match mode changes.
- TOPICS - Match topic changes.
- WALLOPS - Match wallops.
- INVITES - Match invite requests.
- NICKS - Match nickname changes.
- DCC - DCC related messages.
- DCCMSGS - Match DCC chat messages.
- CLIENTNOTICE - Irssi's notices.
- CLIENTCRAP - Miscellaneous irssi messages.
- CLIENTERROR - Irssi's error messages.
-
- ALL - All previous message levels combined.
-
- HILIGHT - Match highlighted messages.
- NOHILIGHT - Don't check a message's highlighting.
- NO_ACT - Don't trigger channel activity.
- NEVER - Never ignore, never log.
- LASTLOG - Never ignore, never log.
-
------
-
-Appendix B: Special Variables and Expandos
-
-Several settings allow special variables. These variables will be
-replaced by the text they represent at the time they're used. Not at
-the time you set the setting!
-
-They are mostly used for formatting text in themes.
-
-From <http://irssi.org/documentation/special_vars> :
-
- NOTE: This is just a slightly modified file taken from EPIC's help.
-
- Special Variables and Expandos
-
- Irssi supports a number of reserved, dynamic variables, sometimes
- referred to as expandos. They are special in that the client is
- constantly updating their values automatically. There are also
- numerous variable modifiers available.
-
- Modifier Description
- $variable A normal variable, expanding to the first match
- | of:
- | 1) an internal SET variable
- | 2) an environment variable
- $[num]variable Expands to the variables value, with 'num' width.
- | If the number is negative, the value is
- | right-aligned.
- | The value is padded to meet the width with the
- | character given after number (default is
- | space).
- | The value is truncated to specified width
- | unless '!' character precedes the number. If
- | '.' character precedes the number the value
- | isn't padded, just truncated.
- $#variable Expands to the number of words in $variable. If
- | $variable is omitted, it assumes $*
- $@variable Expands to the number of characters in $variable.
- | if $variable is omitted, it assumes $*
- $($subvariable) This is somewhat similar to a pointer, in that
- | the value of $subvar is taken as the name of
- | the variable to expand to. Nesting is allowed.
- ${expression} Permits the value to be embedded in another
- | string unambiguously.
- $!history! Expands to a matching entry in the client's
- | command history, wildcards allowed.
-
- Whenever an alias is called, these expandos are set to the arguments
- passed to it. If none of these expandos are used in the alias, or
- the $() form shown above, any arguments passed will automatically be
- appended to the last command in the alias.
-
- Expando Description
- $* expands to all arguments passed to an alias
- $n expands to argument 'n' passed to an alias (counting from
- zero)
- $n-m expands to arguments 'n' through 'm' passed to an alias
- $n- expands to all arguments from 'n' on passed to an alias
- $-m expands to all arguments up to 'm' passed to an alias
- $~ expands to the last argument passed to an alias
-
- These variables are set and updated dynamically by the client. The
- case of $A .. $Z is important.
-
- Variable Description
- $, last person who sent you a MSG
- $. last person to whom you sent a MSG
- $: last person to join a channel you are on
- $; last person to send a public message to a channel you
- are on
- $A text of your AWAY message, if any
- $B body of last MSG you sent
- $C current channel
- $D last person that NOTIFY detected a signon for
- $E idle time
- $F time client was started, $time() format
- $H current server numeric being processed
- $I channel you were last INVITEd to
- $J client version text string
- $K current value of CMDCHARS
- $k first character in CMDCHARS
- $L current contents of the input line
- $M modes of current channel, if any
- $N current nickname
- $O value of STATUS_OPER if you are an irc operator
- $P if you are a channel operator in $C, expands to a '@'
-
- $Q nickname of whomever you are QUERYing
- $R version of current server
- $S current server name
- $T target of current input (channel or nick of query)
- $U value of cutbuffer
- $V client release date (format YYYYMMDD)
- $W current working directory
- $X your /userhost $N address (user@host)
- $Y value of REALNAME
- $Z time of day (hh:mm, can be changed with /SET
- timestamp_format)
- $$ a literal '$'
-
- $versiontime prints time of the irssi version in HHMM
- format
- $sysname system name (eg. Linux)
- $sysrelease system release (eg. 2.2.18)
- $sysarch system architecture (eg. i686)
- $topic channel topic
- $usermode user mode
- $cumode own channel user mode
- $cumode_space like $cumode, but gives space if there's no
- mode.
- $tag server tag
- $chatnet chat network of server
- $winref window reference number
- $winname window name
- $itemname like $T, but use item's visible_name which may
- be different (eg. $T = !12345chan, $itemname =
- !chan)
-
- For example, assume you have the following alias:
-
- alias blah msg $D Hi there!
-
- If /blah is passed any arguments, they will automatically be appended
- to the MSG text. For example:
-
- /blah oops /* command as entered */
- "Hi there! oops" /* text sent to $D */
-
- Another useful form is ${}. In general, variables can be embedded
- inside strings without problems, assuming the surrounding text could
- not be misinterpreted as part of the variable name. This form
- guarantees that surrounding text will not affect the expression's
- return value.
-
- /eval echo foo$Nfoo /* breaks, looks for $nfoo */
- /eval echo foo${N}foo /* ${N} returns current nickname */
- fooYourNickfoo /* returned by above command */
-
------
-
-Appendix C: Time Formats
-
-Messages that describe times are formatted according to the strftime()
-function in C. According to FreeBSD's strftime() man page, parts of
-the format represented with "%" and a letter code are expanded in the
-following ways.
-
- %A is replaced by national representation of the full weekday name.
-
- %a is replaced by national representation of the abbreviated
- weekday name.
-
- %B is replaced by national representation of the full month name.
-
- %b is replaced by national representation of the abbreviated month
- name.
-
- %C is replaced by (year / 100) as decimal number; single digits are
- preceded by a zero.
-
- %c is replaced by national representation of time and date.
-
- %D is equivalent to ``%m/%d/%y''.
-
- %d is replaced by the day of the month as a decimal number (01-31).
-
- %E* %O*
- POSIX locale extensions. The sequences %Ec %EC %Ex %EX %Ey %EY
- %Od %Oe %OH %OI %Om %OM %OS %Ou %OU %OV %Ow %OW %Oy are
- supposed to provide alternate representations.
-
- Additionly %OB implemented to represent alternative months
- names (used standalone, without day mentioned).
-
- %e is replaced by the day of month as a decimal number (1-31);
- single digits are preceded by a blank.
-
- %F is equivalent to ``%Y-%m-%d''.
-
- %G is replaced by a year as a decimal number with century. This
- year is the one that contains the greater part of the week
- (Monday as the first day of the week).
-
- %g is replaced by the same year as in ``%G'', but as a decimal
- number without century (00-99).
-
- %H is replaced by the hour (24-hour clock) as a decimal number
- (00-23).
-
- %h the same as %b.
-
- %I is replaced by the hour (12-hour clock) as a decimal number
- (01-12).
-
- %j is replaced by the day of the year as a decimal number
- (001-366).
-
- %k is replaced by the hour (24-hour clock) as a decimal number
- (0-23); single digits are preceded by a blank.
-
- %l is replaced by the hour (12-hour clock) as a decimal number
- (1-12); single digits are preceded by a blank.
-
- %M is replaced by the minute as a decimal number (00-59).
-
- %m is replaced by the month as a decimal number (01-12).
-
- %n is replaced by a newline.
-
- %O* the same as %E*.
-
- %p is replaced by national representation of either "ante meridiem"
- or "post meridiem" as appropriate.
-
- %R is equivalent to ``%H:%M''.
-
- %r is equivalent to ``%I:%M:%S %p''.
-
- %S is replaced by the second as a decimal number (00-60).
-
- %s is replaced by the number of seconds since the Epoch, UTC (see
- mktime(3)).
-
- %T is equivalent to ``%H:%M:%S''.
-
- %t is replaced by a tab.
-
- %U is replaced by the week number of the year (Sunday as the first
- day of the week) as a decimal number (00-53).
-
- %u is replaced by the weekday (Monday as the first day of the week)
- as a decimal number (1-7).
-
- %V is replaced by the week number of the year (Monday as the first
- day of the week) as a decimal number (01-53). If the week
- containing January 1 has four or more days in the new year,
- then it is week 1; otherwise it is the last week of the
- previous year, and the next week is week 1.
-
- %v is equivalent to ``%e-%b-%Y''.
-
- %W is replaced by the week number of the year (Monday as the first
- day of the week) as a decimal number (00-53).
-
- %w is replaced by the weekday (Sunday as the first day of the week)
- as a decimal number (0-6).
-
- %X is replaced by national representation of the time.
-
- %x is replaced by national representation of the date.
-
- %Y is replaced by the year with century as a decimal number.
-
- %y is replaced by the year without century as a decimal number
- (00-99).
-
- %Z is replaced by the time zone name.
-
- %z is replaced by the time zone offset from UTC; a leading plus
- sign stands for east of UTC, a minus sign for west of UTC,
- hours and minutes follow with two digits each and no delimiter
- between them (common form for RFC 822 date headers).
-
- %+ is replaced by national representation of the date and time (the
- format is similar to that produced by date(1)).
-
- %% is replaced by `%'.
-
------
-
-Appendix D: Color Codes
-
-Irssi defines codes to represent colors. They work like the
-strftime() codes in Appendix C.
-
-From <http://irssi.org/documentation/formats> :
-
- Irssi's colors that you can use in text formats, hilights, etc. :
-
- text text background
- ---------------------------------------------------------------------
- %k %K %0 black dark grey black
- %r %R %1 red bold red red
- %g %G %2 green bold green green
- %y %Y %3 yellow bold yellow yellow
- %b %B %4 blue bold blue blue
- %m %M %5 magenta bold magenta magenta
- %p %P magenta (think: purple)
- %c %C %6 cyan bold cyan cyan
- %w %W %7 white bold white white
- %n %N Changes the color to "default color", removing
- all other coloring and formatting. %N is
- always the terminal's default color. %n is
- usually too, except in themes it changes to
- "previous color", ie. hello = "%Rhello%n" and
- "%G{hello} world" would print hello in red,
- and %n would turn back into %G making world
- green.
- %F Blinking on/off (think: flash)
- %U Underline on/off
- %8 Reverse on/off
- %9 %_ Bold on/off
- %: Insert newline
- %| Marks the indentation position
- %# Monospace font on/off (useful with lists and
- GUI)
- %% A single %
-
- In .theme files %n works a bit differently. See default.theme for more
- information.
-
------
-
-Appendix E comes directly from
-<http://irc.fu-berlin.de/irc/help/SET/TRANSLATION.html> :
-
- Usage: SET TRANSLATION <character translation table>
-
- The TRANSLATION variable defines a character translation table. By
- default, ircII assumes that all text processed over the network is
- in the ISO 8859/1 map, also known as Latin-1. This is identical to
- standard ASCII, except that it is extended with additional
- characters in the range 128-255. Many environments by default use
- the Latin-1 map, such as X Windows, MS Windows, AmigaDOS, and modern
- ANSI terminals including Digital VT200, VT300, VT400 series and
- MS-Kermit. However, many older environments use non-standard
- extensions to ASCII, and yet others use 7-bit national replacement
- sets.
-
- Some available settings for the TRANSLATION variable:
-
- 8-bit sets:
- CP437 Old IBM PC, compatibles and Atari ST.
- CP850 New IBM PC compatibles and IBM PS/2.
- DEC_MCS DEC Multinational Character Set.
- VAX/VMS. VT320's and other 8-bit
- Digital terminals use this set by
- default, but I recommend changing to
- Latin-1 in the terminal Set-Up.
- DG_MCS Data General Multinational Character Set.
- HP_MCS Hewlett Packard Extended Roman 8.
- LATIN_1 ISO 8859/1. Default.
- MACINTOSH Apple Macintosh computers and boat
- anchors.
- NEXT NeXT.
-
- 7-bit sets:
- ASCII ANSI ASCII, ISO Reg. 006. For American
- terminals in 7-bit environments. Use
- this one if everything else fails.
- DANISH Norwegian/Danish.
- DUTCH Dutch.
- FINNISH Finnish.
- FRENCH ISO French, ISO Reg. 025.
- FRENCH_CANADIAN French in Canada.
- GERMAN ISO German, ISO Reg. 021.
- IRV International Reference Version, ISO
- Reg. 002. For use pedantic in ISO 646
- environments.
- ITALIAN ISO Italian, ISO Reg. 015.
- JIS JIS ASCII, ISO Reg. 014. Japanese
- ASCII hybrid.
- NORWEGIAN_1 ISO Norwegian, Version 1, ISO Reg. 060.
- NORWEGIAN_2 ISO Norwegian, Version 2, ISO Reg. 061.
- PORTUGUESE ISO Portuguese, ISO Reg. 016.
- PORTUGUESE_COM Portuguese on Digital terminals.
- RUSSIAN Russian
- RUSSIAN_ALT Alternative Russian.
- SPANISH ISO Spanish, ISO Reg. 017.
- SWEDISH ISO Swedish, ISO Reg. 010.
- SWEDISH_NAMES ISO Swedish for Names, ISO Reg. 011.
- SWEDISH_NAMES_COM Swedish. Digital, Hewlett Packard.
- SWISS Swiss.
- UNITED_KINGDOM ISO United Kingdom, ISO Reg. 004.
- UNITED_KINGDOM_COM United Kingdom on DEC and HP terminals.
-
- Please forward any extra translation tables to the ircII development
- team by using the ircbug utility that comes with the package, or,
- failing that, sending mail to ircii-bugs@eterna.com.au directly.
-
------
-
-Copyright & License.
-
-The original portions of this document are Copyright 2005 by Rocco
-Caputo <rcaputo@cpan.org> and Nei (on irc.freenode.net #irssi). Other
-portions are Copyright by their respective authors or licensors.
-
-This work is licensed under a Creative Commons Attribution-ShareAlike
-2.5 License. Please see http://creativecommons.org/licenses/by-sa/2.5/
-for details. Summary:
-
- You are free:
-
- * to copy, distribute, display, and perform this work
- * to make derivative works
- * to make commercial use of this work
-
- Under the following conditions:
-
- Attribution. You must attribute the work in the manner specified
- by the author or licensor.
-
- Share Alike. If you alter, transform, or build upon this work,
- you may distribute the resulting work only under a license
- identical to this one.
-
- * For any reuse or distribution, you must make clear to others the
- license terms of this work.
- * Any of these conditions can be waived if you get permision from
- the copyright holder.
-
- Your fair use and other rights are in no way affected by the above.
-
-Sorry for the heavy license crap. Coekie wanted clarification.
-
-END
git.99rst.org / irssi-scripts.irssi.org.git / commitdiff